Used Pattern Makers Lathe for sale (5,984)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 286964, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, overall weight: 5,000 kg, controller model: MAZATROL SMOOTH C, Equipment: chip conveyor, The payment deadline for the machine is 04.12.2025! Placing a bid obligates the buyer to collect the machine within the specified timeframe between 10.12.2025 and 12.12.2025! The machine can be inspected on 25.11.2025! Fsdpfx Agexvbdgorepp TECHNICAL DETAILS Travel Distance X-Axis: 200 mm Travel Distance Z-Axis: 300 mm Control System: MAZATROL SMOOTH C MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,500 x 2,000 mm Total Weight: 5,000 kg Electrical Data Operating Voltage: 400 V Frequency: 50-60 Hz Rated Current: 46 A Connection Load: 26.1 kVA EQUIPMENT 12-position tool turret Three-jaw chuck (diameter: 160 mm) Sorting unit with vibratory head from manufacturer GRIMM Chip conveyor Cooling system

Condition: reconditioned (used), Year of construction: 2012, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2012 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Fjdpfx Agjwk I Anerepp Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret with AGW and tool drive C axis via main drive 3 x VDI 30 live tools 3-jaw FORKARDT chucks Ø 250 mm 1 x fixed lynette Ø 120 mm Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Chip collection tray 5 x Height-adjustable machine mounts Operating instructions THE MACHINE IS IN VERY GOOD CONDITION!! THE MACHINE WAS ONLY USED FOR TRAINING!! THE MACHINE HAS ONLY 9044 OPERATION HOURS!!!

Condition: excellent (used), Cycle Lathe Weiler E 50 / 1D Year of manufacture: 1999 Machine no.: 684 Control: Weiler (Siemens 810D) Fpodpfswtqnrox Agrsp Power-on hours: 43,543h (Machine was overhauled by Schmeißer a few years ago) Technical specifications: Spindle speed: 1–625 / 4–2,500 rpm (2 gear stages) Drive power: 17kW torque Spindle torque: 1,200Nm Spindle bore: 66mm Distance between centers: 1,000mm Center height: 280mm Swing diameter over bed: 570mm Swing diameter over cross slide: 340mm Equipment/Accessories: - Interface for external programming - Parat tool holder incl. 6 holders - Operating manual - Coolant system - Various turning tools and drills - Jaws for lathe chuck - Live center - Machine feet The machine has been tested under power and is in perfect, ready-to-use condition. The machine bed is also in good condition. Price: net ex works, loaded on truck from stock.

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min Fpedpfx Agsu Sbkgorsp drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: excellent (used), Swing over bed 330 mm Distance between centers 750 mm Spindle speeds 1-4'500 rpm Control: WEILER C3 Misc. accessories Fodpfxeud Naqs Agropp MARCELS MASCHINEN CH

Condition: used, Year of construction: 2020, overall weight: 1,150 kg, This Optimum lathe, model: Opty turn TZ 4, is being auctioned online in our industrial/machinery auction due to the site closure of BALLUFF STM GmbH – including swivel chairs, laboratory technology, ESD furniture, and much more. You will find this and many other items on our platform. Fodpfx Agoxu Tvrjrspp

Condition: new, The Sinus 330/2000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior precision. Built on a solid, one-piece cast bed, this machine ensures remarkable rigidity and stability even under heavy workloads. It features a manual multi-disc clutch for smooth operation and can handle large workpieces, with a turning diameter over the bed of 660 mm and a maximum workpiece length of 2,000 mm. Highlighted by its hardened guideways, the Sinus 330/2000 D operates quietly while providing high cutting power, making it ideal for machining large parts and flanges. Additionally, it includes a removable bed bridge for versatility, automatic lubrication for optimal performance, and a tapered turning device for enhanced functionality. With standard equipment that encompasses a three-axis position indicator, efficient coolant system, and rapid feed capabilities on both Z and X axes, this lathe stands out in both functionality and user safety. You can request a quote to explore how the Sinus 330/2000 D can meet your machining needs within the Engine Lathes product group. Fodpfxju E Nhgj Agrepp

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret 3-jaw RÖHM chuck, Ø 200 mm Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Chip collection tray Fsdpfx Agjwfm Tbjrepp 5 height-adjustable machine mounts Operating manual

Condition: excellent (used), Year of construction: 2004, We are offering an exceptionally high-quality precision lathe. Within its class, this is likely the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, including CE certification and central lubrication Machine No.: T1022.2027-00 Center height: 240 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 285 mm Center distance: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Fedpfxow Rdths Agrspp Spindle nose: DIN 55027 Size 6 Spindle bore: 100 mm Drive power: 11 kW Maximum torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Tailstock taper: MK 5 Machine footprint (LxW): approx. 4,000 x 1,525 mm Weight: approx. 4,300 kg Accessories: - HEIDENHAIN 3-axis digital readout - Central lubrication system - Electrically interlocked chuck guard - Coolant system - Chip protection rear panel - Röhm chuck, T 250 mm, with various jaws - Telescopic cover for lead and feed screw, support to bed - Machine lamp - Multifix C + 4 quick-change tool holders - Live center - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and visual condition. Backlash on cross slide approx. 0.3 mm, on compound slide approx. 0.15 mm Spindle nose runout approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over approx. 750 mm bed length (measured on flat guideway towards chuck using dial indicator) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for operating lever replaced - Locking pin for interlock replaced Price is net, ex stock, loaded free of charge. Delivery by company truck can be arranged at extra cost.

Condition: excellent (used), spindle bore: 84 mm, turning diameter: 1,000 mm, turning length: 5,000 mm, quill stroke: 300 mm, total length: 11,380 mm, total width: 2,200 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, swing diameter over cross slide: 1,876 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, overall weight: 17,730 kg, quill mount: MK 5, faceplate diameter: 1,000 mm, Heavy duty lathe is in a very nice condition, under power. It is equipped with lunette and steady rest. Carriage is overhauled, shaft bronze bushings are new. Fpjdexwd D Eepfx Agrep

Condition: excellent (used), Swing over bed 212 mm Distance between centers 750 mm Fpsdpfxeud Nb Io Agrep Spindle speeds 10-4'000 rpm Control: HEIDENHAIN Manual Plus Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1976, turning diameter over bed 0300 mm turning diameter over slide rest 180 mm Fedsxu Nrcspfx Agropp turning length 750 mm turning speed range 44 - 1300 U/min spindle bore 41,0 mm quill stroke 105 mm morse taper 3 MK bed width 245 mm total power requirement 2,2 kW weight of the machine ca. 1250 t dimensions of the machine ca. 2000 x 1200 x 1500 m

Condition: excellent (used), Year of construction: 2018, MAZAK QUICK TURN 250MY 500U Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - CNC control Mazatrol SmoothG - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders Fjdpfxjw Rqqys Agrepp

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fpjdpfx Agjuzyw Dsrjp Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: good (used), Lead and feed spindle lathe Matra SM-3000 Country of origin: Spain Turning diameter over bed 600 mm Fpedpfovq I Npox Agrjp Turning diameter over support 370 mm Turning length 3000 mm Turning diameter in the crank 900 mm Length of the crank 280 mm Spindle bore 72 mm Speed range 17-1,652 rpm Spindle speed levels 36 Main motor, power 9/11 kW Rapid traverse longitudinal-transverse Tailstock MK5 Machine weight approx. 4 t Dimensions (LxW) approx. 4800x1300mm Equipment/accessories: - Fixed steady rest with rollers/max. Workpiece diameter 220 mm - Coolant system - Bed stop - Röhm lathe chuck D500mm - Digital display 2-axis SINO - Multifix C base holder The machine is in very good, fully operational condition. Price net, free loading from warehouse

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws Fpodpeu Afqlsfx Agrjp >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Back plate To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Circulation O over bed: 435 mm O rotation over cross slide: 200 mm Center height: 210 mm Speed range: 1 - 3500 rpm infinitely variable Fsdpfjvkd Injx Agrjpp With the following accessories: Sliding guard with interior lighting Multifix tool holder with 8 pcs. inserts 8-position SAUTER turret with AGW and tool drive C axis via main drive 3 jaw chucks Schunk ROTA plus 0 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable drilling quill Coolant device reinforced 5.5 bar Coolant spray gun Chip collection tray 5 pcs. Height-adjustable machine shoes Operating instructions

Condition: reconditioned (used), We are offering an exceptionally good precision lathe. The machine is probably the best German lathe that has been built in this class. BOEHRINGER precision lathe model DUE 800 Year of manufacture: 1984 Order no.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter over facing slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar passage: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. Torque: 6300 Nm 24 Speeds: 7.1 - 1400 rpm 60 face feeds: 0.05 - 28 mm/rev 60 longitudinal feeds: 0.06 - 56 mm/rev Rapid traverse in longitudinal cross feed Motorized top support Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital readout HEIDENHAIN Coolant device; chip protection rear panel, power chuck autoblock 500 mm with clamping jaws, roller conveyor cover for lead screw support to bed, machine light, chip conveyor, Parat basic holder incl. 11 holders, suction unit, 3-jaw steady rest with roller inserts (moving), emergency stop, chuck key, moving center point, operating instructions Fsdpfxsrt T S Ro Agropp Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and face slide 0.15 mm The geometry of the machine is also very good (was checked with a dial gauge) Measured on the flat track guide with dial gauge in the direction of the lathe chuck Bed wiper replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins on motor/gearbox side replaced, shaft seals on lock case replaced, various bearings replaced The machine can be demonstrated under power. Functional videos can also be sent on request.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm Fpodpfx Aeu Aftgsgrep >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Fpodpfx Agow Ew D Dsrep Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: Fpjdeu E H Iwjpfx Agrsp 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch Fsdpfx Agevtp Ederjpp >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS guide and feed spindle lathe in very good original condition! Fpodpfx Aswkh Abjgrsp Technical specifications: >> Year of manufacture approx. 1992 Machine no. 4549 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> New collet chuck system, new collets from 3 to 25 mm >> 1 piece Three-jaw chuck with 2 sets of jaws >> Mulifix size A with 2 tool holders About the machine: Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 Fpsdpfx Ajvkfhpjgrop >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch Fpjdpfx Aovivmysgrep >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.