Used Pattern Makers Lathe for sale (6,016)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, total height: 2,300 mm, total length: 4,800 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 100 mm, feed length Z-axis: 900 mm, overall weight: 8,500 kg, The machine comes from a well-maintained company. Control system: 840D. Accessories as shown in the pictures. Kjdpez Dw Dpsfx Ah Eodt

Condition: ready for operation (used), Year of construction: 2023, operating hours: 5,000 h, machine/vehicle number: 10000000826, approx. 7,000 operating hours, approx. 5,000 load hours including: - DMG Mori Slim Line control system - Chip conveyor - Rittal machine cooling system - Lubricant filtration system - Breuning ILS MUK-7012-IV material loader, year of manufacture: 12/2023 The machine can be purchased via an online auction on our website. Kdsdpfx Asz Dv Dzeh Ejt You can access the website by clicking on the link in the advertisement. Auction end date: October 7, 2026, 6:00 PM.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,747 h, machine/vehicle number: 00820000561, CNC turning machine DMG Mori CTX beta 800 TC, No. 00820000561, year of manufacture 2015, 24,796 operating hours, 13,747 load hours. including: - DMG Mori control system - Oil leak on the Ergoline pump housing - Chip conveyor - Machine coolant system - Lubricant filter system - Material loader ILS MUK 7012-III, Machine No. 74101508, year of manufacture 04/2016 The machine can be purchased via an online auction on our website. You can access it by clicking on the link in the advertisement. Kjdjz Dv Ndepfx Ah Esdt Auction ends: October 7, 2026, 6:00 PM.

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm Kodpfx Ajz Apc Rjh Eodt MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, spindle speed (max.): 3,250 rpm, overall weight: 7,600 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Torque at 40% duty cycle (ED) max.: 630 Nm Torque at 100% duty cycle (ED): 420 Nm Number of tool positions in tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg MACHINE DETAILS Kdjdoz Apduspfx Ah Est Control system manufacturer: Siemens Spindle power at 40% duty cycle (ED): 33 kW Spindle power at 100% duty cycle (ED): 22 kW Electrical connection: approx. 50 kVA Mains connection: 400 V Frequency: 50/60 Hz Dimensions & Weight Dimensions with chip conveyor: approx. 5,300 × 1,900–2,200 × 1,700–2,000 mm Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor

Condition: good (used), Year of construction: 1970, POREBA TR 70 BIS Conventional Lathe 700 x 2000 mm Heavy-duty conventional lathe in used condition. Manufacturer: POREBA Model: TR 70 BIS Swing over bed: 700 mm Swing over cross slide: approx. 420 mm Turning length: 2,000 mm Ksdpfxsz Dkvfo Ah Esdt Spindle bore: approx. 80 mm Spindle speed: approx. 10-1,000 rpm Main motor: approx. 14 kW 3-jaw chuck, faceplate Tailstock Additional chucks / faceplates included Machine weight: approx. 5,000 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Ksdpfjz Dwtwex Ah Esdt For more information or contact options, please visit our website.

Condition: repair required (used), Year of construction: 1992, Weisser Heilbronn HEKTOR – Cycle-controlled CNC lathe - Bosch CC220 control system (requires repair) - Includes tools and accessories - Includes operating manual and technical documentation - Year of manufacture: 1992 Technical data: - Distance between centers: 2000 mm Ksdpsz Az Snjfx Ah Eodt - Center height: 300 mm - Swing over bed: 600 mm - Spindle bore Ø: 80 mm - Tailstock spindle taper: MK5 - Bed width: 430 mm - Operating voltage: 400 V - Dimensions (W x H x D): approx. 4700 x 2300 x 2100 mm - Weight: approx. 8000 kg

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor Kdsdezwdqropfx Ah Est *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Year of construction: 2017, operating hours: 7,500 h, condition: excellent (used), functionality: fully functional, Manufacturer: MAZAK Model: VARIAXIS J-600 Year: 2017 Control unit: Smooth X X-axis travel: 850 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Kjdpjz Dt I Rofx Ah Esdt Spindle connection: DIN-69871 Tool magazine capacity: 30 Maximum spindle speed for milling: 12,000 rpm Maximum workpiece dimensions: 730 mm Maximum workpiece height: 450 mm 5-axis continuous operation: Yes Spindle power: 11 kW Table size: 600 x 500 mm High-pressure coolant system through the spindle: 20 bar B-axis travel: -120 / +90 Maximum workpiece weight (spindle): 500 kg

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Kodpfx Ajz Agzqsh Eodt Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 730 mm, turning diameter: 400 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS Travel in X-axis: 240 mm Travel in Z-axis: 640 mm Kdedpfsz Ahybox Ah Est Turning length: 730 mm Turning diameter: 400 mm Spindle speed: 4,000 rpm Spindle bore: 66 mm MACHINE DETAILS Control system: Siemens Machine weight, approx.: 5,500 kg EQUIPMENT Automatic tool changer (ATC) Tailstock Parts catcher

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: - Turning diameter over bed: 700 mm - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) Kdsdpfxjz An Rys Ah Est - Control: FANUC (original) Can be inspected under power in our workshop and is ready for immediate delivery.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Kdodpfezy Hx Djx Ah Ejt Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Year of construction: 1972, condition: good (used), KZTS 1836A-14 Railway Wheelset Lathe Kdodpfx Ahsz A Ap Uo Est Year: 1972 Max. wheel diameter: approx. 1,140 mm Wheel diameter at rolling circle: 840 - 1,075 mm Max. axle length: approx. 2,600 mm Centre height: approx. 630 mm Speed range: 4 - 31.5 rpm Main motor: 55 kW Dimensions: approx. 7,250 × 4,380 × 1,890 mm Weight: approx. 39,500 kg Heavy-duty railway wheelset lathe for machining and reprofiling complete railway wheelsets. For more details, please contact us.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Kedpfez Agzdox Ah Esdt Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 335 mm, center height: 165 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, overall weight: 900 kg, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe with accessories in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Colchester • Model: Master-2500 • Distance between centers/turning length: approx. 1,016 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 2,500 rpm Kdedoz Dbkyepfx Ah Est • Spindle nose: 4 in. D.1. Camlock • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm (Pratt Burnerd) • Weight: approx. 900 kg • Tailstock quill: MK3 • Motor power: approx. 5 hp • With accessories: Set of jaws for the chuck, quick-change tool holder, centers, etc. • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire with your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Reference: LT-2512 Manufacturer: Okuma Model: LVT300-M Control Unit: Okuma OSP-P200L Year of Manufacture: 2007 Keyboard / Software Language: International / Spanish Country of Origin: Japan Technical Specifications Capacity Swing over bed: Ø 280 mm Swing over Z-axis carriage: Ø 280 mm Swing over X-axis carriage: Ø 280 mm Max. turning diameter x length: Ø 280 x 200 mm Main Spindle Spindle bearing diameter: Ø 100 mm Spindle nose type: JIS A2-6 Spindle bore diameter: Ø 62 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 40 – 4,000 rpm Spindle motor: 22/15 kW (20 min/continuous rating), VAC type X-Axis Travel: 210 mm + 845 mm (for workpiece loading) Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 60,000 mm/min Z-Axis Travel: 360 mm Cutting feedrate: 0.001 – 1,000.00 mm/rev Rapid traverse rate: 30,000 mm/min Turret Type: VDI 40 Number of tool stations: 12 (L or M) Tool Dimensions O.D. turning shank size: 25 x 25 mm I.D. boring bar shank diameter: Ø 40 mm Live Tooling / Driven Tools Rotational speed: 45 – 4,500 rpm Speed ranges: 1 range, infinitely variable Drive motor: 3.7/2.2 kW (15 min/continuous rating) C-Axis Controlled indexing angle: 360° (0.001° minimum increment) Rapid traverse rate: 200 rpm Dimensions and Weight Machine height: 2,500 mm Floor space footprint: 1,320 x 2,800 mm Machine weight: 5,600 kg Included Options EWAB palletized conveyor system (pallets not included) MAYFRAN chip conveyor FORKARDT 3QLC 200-54 hydraulic chuck (3-jaw / 210 mm) Tool presetter (TOUCH SETTER) TOOL LIFE MANAGEMENT function Rigid tapping Kjdsy Smz Ejpfx Ah Eodt DNC-T1

Condition: like new (used), Year of construction: 2015, operating hours: 18,000 h, machine/vehicle number: IntNr231671, CNC Swiss-type lathe STAR SR32JN, new, manufactured in 2015 Control system, manufacturer: Fanuc, series 32i-B, 7 axes (X/Z/Y/C1/X1/Z1/C2), Bar diameter max. 32 mm, Turning length max. 80 mm, Main spindle, speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle diameter max. 32 mm, Counter spindle speed max. 7,000 rpm, C-axis, Tool holder for a total of 23 tools (linear tool holder, front tool holder, rear machining), Coolant pump with increased flow rate Parts conveyor belt, Mayfran chip conveyor, Bar feeder magazine FMB turbo 3-36/3200 / A / accessories for short-turning The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale! Kodjz Dwubopfx Ah Eodt

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. All the machine's mechanical properties are perfect. Kodpfx Ahjzwdamo Eodt The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Year of construction: 2022, operating hours: 887 h, condition: like new (used), functionality: fully functional, BIGLIA B620Y lathe Kjdpsz Apk Ujfx Ah Eodt Year: 2022 Part collector and tailstock in cycle operation Control unit: Fanuc Maximum machining length*1 (capacity): 620 mm Turning diameter: 360 mm Bar capacity: 70 mm Spindle mount (spindle): ASA 8 Spindle speed (main spindle): 4500 rpm Spindle power (turning): 30 - 40 Kw Motorized tool power: 11 - 13 Kw Chip conveyor (belt type)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, spindle bore: 40 mm, turning diameter over bed slide: 330 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, overall weight: 700 kg, TECHNICAL DETAILS Center distance: 635 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 210 mm Swinging diameter in the gap: 480 mm Toolmaker's accuracy: DIN 8605 Main spindle bore: 40 mm Spindle mount: DIN 55029 D1-4 Speed steps: 12 Speed range: 40–2,500 rpm Taper in tailstock: MK 3 Tailstock quill travel: 110 mm Longitudinal feeds: 0.03–2 mm/rev Cross feeds: 0.015–1 mm/rev Metric threads: 0.2–14 mm Whitworth threads: 2–56 threads per 1" MACHINE DETAILS Kedpfx Ajzz Rm Ieh Eodt Drive power: 2.2 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,000 × 1,400 mm Weight approx.: 700 kg EQUIPMENT 2-axis digital read-out ACU-RITE® DRO 203 Quick-change tool holder MULTIFIX Chip collection tray with front opening flap Adjustable tool holder guard Rear splash and chip guard Chuck guard Spindle cover Removable bridge Coolant system Work area lighting Threading dial Foot brake with brake pedal over the entire length Operating manual with CE declaration of conformity

Condition: ready for operation (used), functionality: fully functional, total length: 3,000 mm, total width: 1,500 mm, total height: 1,750 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 1,800 kg, The lathe runs and operates very well. A video of the machine in operation can be sent upon request. Kdedsz Dlbiepfx Ah Est In addition, all possible manuals for this lathe are included. Damage: - A piece has broken off the tool holder, but this does not affect the operation. One connector on the rear is broken and needs to be replaced.

Condition: like new (used), functionality: fully functional, total width: 1,400 mm, total length: 2,750 mm, total height: 1,840 mm, overall weight: 770 kg, empty load weight: 770 kg, Copy lathe – precision and efficiency in one A professional copy lathe designed for series production and precise machining of wooden components. The use of a copying mechanism enables quick and repeatable production of parts, which significantly increases work efficiency. The machine features a robust construction, stable operation, and a wide range of rotational speeds, allowing parameters to be adjusted for different materials and diameters. Ideal for the production of table legs, chair legs, furniture components, and other turned parts. - Large turning diameter - Copying mechanism – repeatability of parts - Smooth feed rate adjustment - Powerful and reliable motor - Ready for operation TECHNICAL SPECIFICATIONS: - Maximum distance between centers: 1600 mm - Height of centers above the bed: 250 mm - Maximum turning diameter (manual): 500 mm - Maximum turning diameter with copying: 150 mm - Maximum diameter with a moving support: 90 mm - Drive and tailstock mounting: 3 CM - Carriage feed rate: 0 – 6 m/min - Carriage return speed: 7.33 m/min - Spindle speed change - Spindle motor power: - Installed power: 3.7 kW - Operating pressure of the hydraulic system: 25 bar MACHINE DIMENSIONS - Length 2750 mm - Width 1400 mm - Height 1840 mm - Weight: 770 kg Financing options available through leasing or installment plans. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 Kjdpfx Asz A A Droh Eodt 23-310 MODLIBORZYCE Machine transport throughout the country!

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 13,000 kg, PARALLEL LATHE used, 500x5000mm, TIANSHUI SPARK mod. CW61100E, year '89: Center height mm 500, Max turning diameter on bed mm 1000, Max turning diameter on carriage mm 680, Distance between centers mm 5000, Bar passage mm 140, Spindle nose attachment: ASA 11, Spindle speed: 5 - 400, Spindle power: 36 Kw, Overall dimensions mm (LxWxH) 7100x2500x1700, Machine includes: 4-jaw independent self-centering chuck mm 1000, Fixed steady rest, Fixed steady rest mm 460, Traveling steady rest mm 220, Kedpfxjzg Tz Se Ah Eedt Tailstock with Metric 80 taper, Tool turret type: rotary, fixed, Coolant system.