Used Paper Punching Machine for sale (84,508)

Condition: ready for operation (used), Year of construction: 2001, overall weight: 9,200 kg, pressing force: 20 t, stroke length: 1,350 mm, controller manufacturer: AMADA, General Data Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Ltodpfjx D If Hex Affja Stroke 1350 mm Additional Equipment Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 2100 Press’ colour production system. Item for sale: 1 x Xerox Versant 2100 Press with the following equipment: Includes Fiery Server EX-P2100 Includes Paper Deck A-CF03 Includes Booklet Finisher Includes Stacker Lodpfxjx D Axus Affota Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 5,370,889 pages Colour: Approx. 4,412,255 pages Black: Approx. 958,634 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Weight 295 kg Ltjdpox Hzr Iefx Affoa

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, overall weight: 8,200 kg, total height: 2,130 mm, total length: 3,320 mm, total width: 2,440 mm, space requirement width: 2,440 mm, input current: 30 A, input frequency: 50 Hz, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Ltjdpfx Afjx Hzm Sjfoa

Condition: used, Year of construction: 2011, Programmable photocells Ltodpfxox Hxvdo Affsa

Condition: new, Year of construction: 2025, Automatic strapping machine for 100% recyclable paper strap, compatible with PP strap, strap width 5, 8, 9 or 12 mm, arch size 550 x 400 or 650 x 500 mm, speed 55 cycles per minute, automatic strap feeding and ejection, tension adjustable via potentiometer. Lodpjx Hvu Rsfx Affsta

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 4900 Measurements depth 6190 mm Measurements height 2450 mm Machine weight 8400 kg Control Unit Brand FANUC Model FANUC 16I-PB Main Drive Main motor power 12.5 kW Movement X-Axis Movement 3090 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1540 mm Y-Axis Rapid Traverse 65 m/min Table Outer length 1500 mm Outer width 3000 mm Additional Equipment Integrated Auto-Index system Ltsdex D Nk Rspfx Affja Automatic tool change system with 15 stations Waste extraction system at the die Pedal for opening/closing sheet clamps Pedal for single punching operation Automatic collision prevention for tilting parts and cutouts Interactive CAD with export function Import of CAD drawings in common formats Interactive nesting (freehand, bump nesting) Automatic positioning of special tools This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C7100X colour production system. Item for sale: 1 x Ricoh Pro C7100X with the following equipment: Includes Heidelberg Prinect Includes Vacuum Feed LCIT RT5100 Includes Booklet Finisher SR5060 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,925,251 pages Colour: Approx. 1,061,512 pages Black: Approx. 863,739 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: Ltjdpfx Afsx D Avtsfsa You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: Ledjw Ht Uhjpfx Affeta – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses Lsdsx Hxq Iepfx Affota

Year of construction: 2008, operating hours: 32,154 h, condition: ready for operation (used), Main Drive Number of axis 2 Ltodpfjx D Ew Tox Affoa This Salvagnini S4X was manufactured in 2008. A robust CNC punching machine, it operates on 400V with a nominal power of 33kW and a current of 58A. Ideal for high precision and efficiency in sheet metal processing. If you are looking to get high quality punching capabilities consider the Salvagnini S4X machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 180 Press’ colour production system. Item for sale: 1 x Xerox Versant 180 Press with the following equipment: Includes Fiery Server Includes Paper Deck A-GW03 Includes Booklet Finisher A-FN13 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,395,171 pages Colour: Approx. 2,117,216 pages Black: Approx. 277,955 pages Condition: This offer is for a used device, which may show signs of wear Ledpfex D Auvsx Affjta (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Paper cutting guillotine Ideal 6660 The machine is 100% functional, after inspection like new. This is currently produced, the newest model. A spare knife included. Technical data: working width: 650mm stack height: 80mm minimum remnant: 25mm max. distance of the saddle from the knife: 610mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled Ltjdpfx Aowud R Noffea automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Year of construction: 2003, operating hours: 28,003 h, condition: ready for operation (used), This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Ljdpjx D H Dbefx Affota Application Types Punching

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C4070 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C4070 with the following equipment: Includes Fiery Server Includes Paper Deck PF-707mx2 Includes Finisher FS-532 Includes IQ-501 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,217,800 pages Colour: Approx. 915,259 pages Black: Approx. 302,521 pages Condition: Lodpfx Afex Dzxmjfsta This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Lodpfxsvfukis Affsta Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand FANUC Model 16I-PB Main Drive Punching force 300 kN Table Table load 150 kg Tools Number of station 15 Additional Equipment Programming software: JETCAM This Tecnology Tecnotransfer 15 SR was manufactured in 2004. It features a punching force of 300 kN and an installed power of 14 kW. The worktable accommodates parts up to 1500 mm × 3000 mm, weighing a maximum of 150 kg. It operates at 310–480 strokes per minute and includes 15 indexable tool stations. Runs on JETCAM software. Contact us for more information. Application Types Punching Ltodpfox D Ri Isx Affsa

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Ltjdjwt Sq Uopfx Affsa Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements width 4100 Measurements depth 5700 Measurements height 2070 Machine weight 8000 Main Drive Lodsx D Rg Hspfx Affjta Maximum sheet thickness 6.4 mm Movement X-Axis Movement 1270 Y-Axis Movement 1270 - 2020 Workpiece Workpiece weight 75 kg This 3-axis TRUMPF TC2000R was manufactured in 1999, featuring a robust 1270 mm X and Y-axis travel, expandable to 2020 mm for larger sheets. It boasts a 22-ton punching capacity and a high-speed punching rate of up to 900 strokes/min. The machine includes a 9-station linear magazine with an automatic turret-style changer and full C-axis rotation. Ideal for high precision CNC punching. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Polar Mohr 115 EMC Paper Cutting Guillotine The machine is fully operational. Inspected and ready to use. Technical specifications: Ltjdpfoxzul Usx Affea Cutting width: 1150mm Stack height: 165mm Programmer Air table Photocells Side tables Additional rear table guards Weight: 3200kg 380V power supply Tool kit, safety knife change tool, tapping block, spare knife, and one in the machine.

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter switching mm/inch Electromagnetic knife and pressure beam drive Photocells Ljdpsvbb Rhefx Affjta laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Ledsxzumxopfx Affsta Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine Ljdpsx A Sddjfx Affota The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Paper cutting guillotine QZYK 1370 DH-1520 The machine is fully functional, in perfect condition. After inspection, ready to work. Year of production 2022. This is the highest quality copy of the Polar Mohr guillotine. Technical data: Cutting width: 1370mm Stack height: 165mm Programmer with color display Air table Photocells Chrome table surface Ball screw drive of the rear comb Optical cutting line Enlarged side tables with aeration Weight: 4200kg 380V power supply Ledpfxewt Sr Se Affota The set includes documentation, a set of tools, a tapping block, a spare knife and one in the machine.

Condition: good (used), Ideal 5221-05 EP Digicut guillotine The machine is 100% operational, after inspection. This is the model with the richest equipment version. Technical data: working width: 520mm stack height: 80mm minimum remnant: 22mm max distance from the saddle to the knife: 520mm 230V power supply Basic features: The machine has a full EP programmer with the function of saving individual steps to the device’s memory hydraulic drive of the pressure beam, pressure force fully adjustable in the range of 200-1100N electromechanical knife and saddle drive automatic pressure synchronized with the cutting movement of the knife electronically controlled saddle adjustment knob with the ability to adjust the speed of its movement Lsdjtxwzzspfx Affeta side tables The „SCS” security system includes: two-handed cutting start, electronically controlled automatic knife return from any position transparent covers on the front and rear table laser cutting pointer Additional equipment includes: a spare knife, a column, a set of tools, a paper stack tapping block, a pressing plate and documentation.