Used Paper Punching Machine for sale (84,508)

Condition: good (used), Year of construction: 1965, functionality: fully functional, STC-Ref:G-091-0221 Wohlenberg -A-107-E ,Year: 1965 format: 0 x 1070 mm equipped: Ltedjxz Dtuopfx Affsa - cutting width 1070 mm - safety light beam - rear table guard - datastore for programmes

Year of construction: 1999, condition: ready for operation (used), Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Ltjdpfxopmt Tts Affsa Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: used, Year of construction: 1998, Max. Cut Width: 1150 mm (115 cm) Infeed/Cutting Depth: 1150 mm (115 cm) Max. Stack Height: Approx. 165 mm Clamping Pressure: Approx. 350 - 4500 daN (programmable) Backgauge Speed Max.: Approx. 30 cm/s (300 mm/s) Main Engine Power: Approx. 4 kW Net Weight: Approx. 3200 kg Machine Width (with side tables): Approx. 242 cm Ledpfx Asxzz I Noffeta Machine Depth: Approx. 256 cm Programator Left/right light barriers Air tables

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 7711206, • Model: Polar 92 X • Type: Cutting machine / Guillotine • Year of manufacture: 2007 • Format: 920 × 920 mm Ltedpfjxzzzcox Affsa • Equipment: Digital program, photocells, air table on the right and left • Condition: Standard machine • Suitable for precise cutting operations in post-press finishing

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) Lodpfx Afem Ak Hujfota (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 170610, Stamping machine with heated stamping head Ltodpfx Afsxy Rk Defsa

Condition: good (used), Year of construction: 1980, functionality: fully functional, STC-Ref:G-091-0217 Wohlenberg 115 ,Year: 1980 format: 0x1150 mm equipped: - safety light beam - rear table guard Ltodpfxexz Dtbj Affea - datastore for programmes - side table - airtable - monitor

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 3,200 mm, stack height: 1,200 mm, type of input current: three-phase, front table length: 3,200 mm, total width: 3,200 mm, Equipment: safety light barrier, ESKO - Kongsberg C64 with very low hours fully atomated - pallet to pallet board feeder - I-BF 60M board stacker - I-MS 60 M i-camera kit, underside cammera conveyer (new matt for buyer installation - currently with origynal one) almost all optional tools: Hi power milling unit (HPMU-C) Dual HDU-C package (crease wheels - small+big, perforation, V-cut) Lsdpfjxy Nznjx Affota Variangle kit VibraCut-C tool Corruspeed Knife (for cardboards) Hi-Force knife - Cpackage inc.blade adapter RM knife tool - C package Multizone pannel TB - Industrial stationary Vacum cleaner sound insulating

Condition: good (used), Year of construction: 2005, functionality: fully functional, Air table on the right and left 1 spare blade Ltsdpfsxy Nv Ejx Affea Rear table cover Large color monitor

Year of construction: 2000, condition: used, machine/vehicle number: 30336, Article number: MA999 Manufacturer: Noble Type: Micromat 203 Year of construction: 2000 Machine number: 30336 Control: CNC he 1904 Length [mm]: 1500 Width [mm]: 1250 Height [mm]: 1650 Weight [kg]: 1600 Power supply: 380V Working hours [h]: 1858 Ljdjdacqhspfx Affeta Positioning range x/Y/Z [mm]: 760 X 310 Cutting force [to]: 20 2 piece of multimedia tools / 3 x / 6 x with various tools Accessories: manual / schematics

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 049004, For Sale: Complete Set of Trimming Machinery This set includes: Horizon HT-80 Three-Knife Trimmer Horizon DC-1000S Docking Conveyor Horizon CV8-3 Cooling Conveyor This equipment can seamlessly integrate with a Horizon BQ-470, BQ-500, SB-07 or SB-09S, SB-09V binding machines, enabling a fully automated trimming process. (Refer to the last picture for a visual explanation.) Perfect for streamlining your production line and improving efficiency! The process is as follows: after the brochure is bound and exits the Horizon binding machine, it is transported to the Horizon DC-1000S docking conveyor, where it is lowered and transferred to the Horizon CV8-3 cooling conveyor. As the binding process continues, the brochures move slowly along the conveyor toward the trimming machine, allowing the glue to cool. By the time the untrimmed brochure reaches the Horizon HT-80 three-knife trimming machine, it has already cooled and is automatically fed into the trimmer. Once the book is trimmed, it is automatically transferred to the gravity conveyor, where the final product is ready for packing. This streamlined layout minimizes the need for additional personnel, requiring only two workers: one to load the brochures into the binding machine and another to pack the trimmed books. 1. Horizon HT-80 Three-Knife Trimmer Serial No.: 049004 Year of Manufacture: 2016 Condition: Excellent, ready to use Counter: Approximately 800,000 Specifications: Min. Untrimmed Book Size: 145 x 105 mm Max. Untrimmed Book Size: 330 x 330 mm Min. Finished Book Size: 139 x 99 mm Max. Finished Book Size: 300 x 300 mm Accessories Included: Cutting and pressing plates (A4 and A5) Production Speed: 400–1,000 cycles/hour Controlled through color touch screen 2. Horizon CV8-3 Cooling Conveyor Serial No.: 008002 Year of Manufacture: 2016 Condition: Excellent, ready to use Key Features: Adjustable height, Metal plate for precise positioning of untrimmed brochures before entering the trimmer Ltedot Nd Eyjpfx Affsa 3. Horizon DC-1000S Docking Conveyor Serial No.: 000005 Year of Manufacture: 2016 Key Feature: The main difference between the Horizon DC-1000S and the Horizon SS-80 docking conveyor is its superior design, which prevents untrimmed books falling from a high height, making it particularly suitable for thick books. Additionally, books are fed onto the conveyor individually, enhancing cutting precision and quality. Additional Details: Selling terms: EXW The equipment is sold only as a complete set; individual components are not available for separate purchase. The Horizon BQ-470 binding machine shown in one of the pictures is not for sale This is a direct sale from the printing house, not through a dealer. A video demonstration or manufacturer‘s brochure is available upon request. Currently located in Kaunas, Lithuania For inquiries or more details, please feel free to contact me.

Condition: used, functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, table length: 2,000 mm, table width: 1,000 mm, input voltage: 410 V, overall weight: 7,500 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, Amada Aries 245 in good working condition, supplied with tools (9 tools with various clearances for different sheet thicknesses). Ltjdpexyzu Hjfx Affsa

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm Ledpfx Aexyy Aioffota throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3407648, Cutting machine 6660 guillotine, year 2015, in good condition. Machine number: 3407648. You are welcome to inspect the machine at our premises by prior appointment. Ltodpfx Aoxvxm Ssffsa

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Ljdsxcbbrepfx Affeta Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Year of construction: 2002, condition: used, machine/vehicle number: 54, Item number: MA961 Manufacturer: Boschert Type: P-60 Year of manufacture: 2002 Ltodpscq Nbwjfx Affoa Machine-No.: 54 Length [mm]: 1800 width [mm]: 3000 height [mm]: 1991 weight [kg]: 5800 Connected load: 380V / 4 KW Stroke [mm]: 50 Working height [mm]: 915 Punching force [to]: 60 Table size LxW: 1100 mm X 3000 mm accessories: manual table supports

Condition: good (used), FOR SALE BRUDERER BSTA 50 PRESS Automatic precision press by Bruderer Model: BSTA 50. Max. press force: 500 kN (50 t). Speed range: 100 – 1,200 spm. Ledpoxvri Tofx Affeta Adjustable stroke: 16; 19; 25; 32; 38; 44; 51 mm. Equipped with Bruderer BBV 202/120 feed unit. Max. strip width: 203 mm. Max. strip thickness: 6 mm. Max. feed length: 120 mm.

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Ledpfx Aeu Hxmzsffsta

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Lodexyyynopfx Affeta Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 68H1124, No minimum price – guaranteed sale to the highest bidder! Ljdpexyfhwjfx Affeta By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Lodpfxjxmfc Uo Affjta Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm Lsdpfx Afstvnlbofota (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: excellent (used), Year of construction: 2018, operating hours: 600 h, functionality: fully functional, feed length X-axis: 7,800 mm, feed length Y-axis: 150 mm, total height: 2,800 mm, pressing force: 60 t, total length: 3,950 mm, total width: 1,635 mm, input frequency: 50 Hz, input voltage: 400 V, For sale is a Lafranconi LM1200 CLASSIC XL SPECIALE, year of manufacture 2018, with only 600 operating hours. The system is in excellent condition and is ideally suited for complex punching and bending processes on wide material cross-sections. Ltsdpfx Afexyav Nsfea Its modular design, modern Siemens control system, and tool compatibility make this machine extremely flexible and versatile in application.

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Lsdpsxyyyhefx Affota Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Ltjdpfexyyx Rox Affea Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg