USED CNC-FIBER LASER CUTTER MANUF. TRUMPF, MODEL TRULASER 1030 FIBER

TRUMPF TRULASER 1030 FIBER

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 21,158 h, machine/vehicle number: A0217E0103, control type: NC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 21,158 h, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, The showcased laser cutting machine is in very good technical condition. It has been used exclusively in our production facility since new. The machine is currently in operation, so it can be demonstrated while running without any issues. It has been regularly serviced by qualified technicians and cleaned of current contaminants. The offered laser cutter is ready for immediate use and reports no errors or faults. Lsdjy Sgmnepfx Ab Ashn

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, diameter: 1.5 - 160 mm Lhedpfx Abewgm Sao Aon stroke: 400 mm weight: 800 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, The machine is in very good condition and has been regularly serviced by qualified service technicians! TECHNICAL DETAILS Laser power: 2,000 W Sheet metal thickness max: 16 mm Sheet metal thickness, steel max: 16 mm Sheet metal thickness, stainless steel max: 8 mm Sheet metal thickness, aluminum max: 6 mm Table length: 3,000 mm Table width: 1,500 mm EQUIPMENT Lhjdpfx Aezlc Sqeb Asn Cooling unit Emergency stop switch Fume extraction Safety light curtain Dust extraction Note: The operating hours can be found in the last image.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Punching force: 220 kN Sheet thickness: 8 mm Working area: 2535x1280 mm Lodpfx Aboyrcycs Ajhn Sheet thickness for stainless steel: 4-6 mm Accessories: - Tool change cassettes - Table with ball rollers - Operating hours: 97,000

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 911 kg Lhsdpfx Aownt Eisb Ajn traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting machine with automatic shuttle table Configuration 1. Bodor Power 3kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Mortise-and-tenon type plate welded segmented bed 5. Stretched aluminum gantry 6. Bodor servo motor and driver 7. Bodor rack and pinion 8. One-click processing 9. Bodor Lightning perforation technology 10. Expert database for high-speed cutting 11. Automatic cutting gas pressure adjustment 12. Open door protection 13. Cutting malfunction alarm function 14. Ergonomic remote control (Bodor Mango®) 15. Active anti-collision function 16. Intelligent anti-shake 17. Gas-saving continuous flow nozzle 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooler 21. Extraction system 22. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 14 mm STAINLESS STEEL 10 mm ALUMINUM 6 mm OPTIONAL: LANTEK EXPERT II CUT software incl. postprocessor Translated with (free version)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 4, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading Lhedpsx D I H Dofx Ab Asn • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Ljdpfx Abjxrnr Nj Ajhn Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Lodpsxabt Aofx Ab Ashn ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Lhodpfx Abey Rnb Do Ajn

Year of construction: 2022, condition: new, Motorized plate shear MS 1303 Technical data: Sheet metal width: 1350 mm Sheet metal thickness: 3.0 mm Distance between uprights: – Table width: 400 mm Lhodpfx Aohk Nfujb Asn Working height: 850 mm Control: conventional