Used Ott Euromatic for sale (82)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Dedpfsy N A A Hjx Aiweut Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Dsdpfx Aisfbr S Rewout • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Duedpfxohy Tlrs Aiwjt

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min Djdpjlc Ewisfx Aiwout COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: excellent (used), Edge trimming machine Duodpfewiwnqjx Aiwjt Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: excellent (used), Year of construction: 1991, Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Dsdpsyyn Rdefx Aiweut Pressing pressure infinitely adjustable via pressure switch Main switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety pull cord Rack compensation CE conformity Pressing area: 2,500 x 1,300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirement (L x W x H) approx.: 2,900 x 1,250 x 1,900 mm Weight: approx. 3,800 kg Request more information NEW MYLAR FILM on both heating plates NEW hydraulic cylinder seals Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex works – free loaded! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. (Your inquiries will only be answered with your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Dodpfx Ajxgpaqeiwsut Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine Duedpfsy Nl Skjx Aiwet 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 1992, Wide belt sanding machine Model RSO-1300 Year of manufacture: 1992 Working width: 1300 mm with roller: 15 kW and pad: 11 kW +brush Duodpjy N Ur Tofx Aiwst Feed speed: 10 m/min & 20 m/min

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, height adjustment type: electric, overall weight: 7,000 kg, year of last overhaul: 2023, compressed air connection: 6 bar, power of the milling unit: 3,000 W, space requirement length: 10,500 mm, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors 80 mm panel thickness 1 x Synchroflex top driven belt system 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station Dodpfx Aijx Nbprewjut 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: used, Year of construction: 2003, functionality: fully functional, For Sale: OTT Unimatic 25.8F Edgebander with Ligmatech ZHR 15 Return System We are selling an OTT Unimatic 25.8F edgebanding machine combined with a Ligmatech ZHR 15 return conveyor table. The units are sold exclusively as a complete set (line). Key Features and Customizations: Custom Grooving Units: The machine has been upgraded with two additional milling units—one for lateral grooving from the front and one for vertical grooving from the top. It was primarily used for the production of interior door frames. Duodpfx Aoygl A Asiwet Stability Upgrades: Custom-built stabilization rollers have been added to the interior side to ensure precision when processing narrow workpieces. Recent Maintenance: Last year, the glue application unit (including the roller) was completely replaced with a new one. The track pads (shoes) were also replaced. Condition and Dimensions: Condition: The machine is rarely used but has been regularly maintained and serviced by TIBO. It is currently in full working order and available for testing on-site. Dimensions: Total line length is 11m, width is 2m. Serious inquiries only, please.

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Max. operating pressure: 320 bar Press cylinders: 8 x 90 mm St/DM Opening width: 400 mm Weight approx.: 8,300 kg Dimensions: 4130 x 1520 x 2150 mm Function tested = new cover plates (gold anodized) Storage location: Supplier Dusdjy Hrzmopfx Aiwot

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press dimensions: 2550 × 1350 mm Pressing force: 80 t Dedpfoyu Sifsx Aiweut Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Robust construction Ideal for veneer work and panel gluing Gold anodized plates Ex works The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Shipping available at extra cost!

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, Veneer Press JU 60 Press size: 2200 x 1200 mm Heating plate damaged (see photos), heating plate is functional Year of manufacture: 1965, heating 12 kW Loading costs extra (forklift rental approx. €500) Transport available at additional cost! Dedpfjmhguaox Aiwout

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Duedjvvkfqopfx Aiwet

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting Duodey E Iycepfx Aiwjt - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: used, working width 750 mm working length 3.000 mm length ~ 3.850 mm width ~1.000 mm height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function. Duedpfx Aijy Erymjwet

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, Max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec Feed speeds: 4 + 8 m/min Main sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed belt: 1.3/1.8 kW Operating pressure: 6 bar, air consumption: 10 l/min, extraction ports: 1 x 150 + 1 x 120 mm LxWxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, 90° Shore hardness - Air sanding pad with automatic engagement and disengagement - Rigid sanding shoe for solid wood frame sanding Dodsy Icnaepfx Aiwout - Brush roller driven by sanding unit - Automatic centering of feed belt - Feed belt with high-quality perforated rubber mat and automatic belt centering - Pneumatic sanding belt tensioning with length compensation - Contactless electronic sanding belt oscillation - Low-wear disc brake system for instant stop of the sanding belt drive with pressure monitor - Motorized thickness adjustment with digital display - Workpiece thickness limiter at infeed - Semi-automatic workpiece thickness adjustment - 4-way grit thickness compensation for contact roller Special accessories: - Workpiece thickness measuring device

Condition: used, Year of construction: 1978, used Manufacturer: Ott Djdpsy H N Tgofx Aiwjut Type: JU60 Year of manufacture: 1978 Machine no.: 10838 GS-certified Panel size: 2200 x 1100 mm Maximum opening: 300 mm Tip control Safety rope Electric heating Piston diameter: 80 mm 4 lower pistons Required space approx. 2600 x 1300 x 1900 mm Location: 97447 Gerolzhofen, free loaded, unpacked Transfer as seen, in current condition No warranty or guarantee

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Duodpfx Ajy Egkgeiwjt Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 12.6 kW (17.13 HP), workpiece height (max.): 50 mm, edge thickness (max.): 15 mm, feed rate X-axis: 22 m/min, overall weight: 3,200 kg, year of last overhaul: 2024, Ott Shark Edgebander for PUR The machine is fully functional and can be viewed and tested on site! The machine was completely overhauled by a specialized company 2 years ago! Equipment: - Angle stop for small parts - Release agent spray unit - Joint trimming unit - Pressure unit - Crosscut saw - Profile trimming unit - Profile milling unit (R2) - Radius scraper blade - Corner copying unit - Flat scraper blade - Polishing station (oscillating) Additionally included: Dedpfx Aiey H Dx Djwsut - PUR glue pot - EVA glue pot - Service station with vacuum box and cleaning/boiling station

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Duodpeyyyftjfx Aiwst Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2000, overall weight: 2,000 kg, Edgebander manufactured in 2000. This OTT Pacific V6-F features an edge thickness capability of 0.2 - 6 mm and can handle workpiece thicknesses from 8 to 42 mm. It operates at a feed speed of 12 m/min and includes various processing units such as joining mills, a gluing unit, and a polishing unit. If you are looking to get high-quality edge banding capabilities, consider the OTT Pacific V6-F machine we have for sale. Contact us for further details. • Condition: Not rebuilt – sold without warranty • Edge thickness: 0.2–6 mm • Workpiece thickness: 8–42 mm • Workpiece width: min. 70 mm • Workpiece length: min. 150 mm • Feed speed: 12 m/min • Electrical connection: 3 x 400 V, 50 Hz • Exhaust connection: 2 x Ø 120 mm at 20 m/sec • Exhaust capacity: 30 m³/hProcessing units and features (part of the machine) • Joining mills: 2 x 1.5 kW, 12,000 rpm, 200 Hz; two application-controlled work spindles • Gluing unit: Rapid-heating tank with Melt-matic; automatic edge magazine with optical monitoring (for strip edges in fixed lengths) • Release agent spray system • Crosscut unit: 2 x 0.2 kW, 12,000 rpm, 200 Hz; automatic swivel 0°/3° • Flush milling unit: 0°/15°/30°/45°; 2 x 0.43 kW, 12,000 rpm, 200 Hz Duedpfx Aoy Df Uuoiwst • Radius milling unit: R2–R5; 2 x 0.3 kW, 12,000 rpm, 200 Hz • Corner rounding milling unit: 2 x 0.3 kW, 12,000 rpm, 200 Hz • Quick-change stations: 2 for milling units • Scrapers: 2 x carbide scrapers • Polishing unit: 2 x 0.2 kW, 2,800 rpm, 50 Hz Additional equipment • None included or specified beyond the machine’s built-in units and features.

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, Ott JU 2511 Hydraulic veneer press with electric heating plates Gold eloxal electric heating plates Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety tear-off cord Rack compensation CE compliant Pressing area: 2500 x 1100 mm Number of press cylinders: 4 Total pressing force: 70 t Lift height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total power consumption: approx. 16.1 kW Dismantlable design Space requirement (L x W x H) approx.: 2960 x 1250 x 1955 mm Weight: approx. 2900 kg Year of manufacture: 1998 Price: €6,500 • Technical data subject to change and prior sale reserved. Duedpfx Aioy Hbw Rjwjt • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, table width: 1,400 mm, table length: 2,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 2,600 mm, No. 3266 Feed-through veneer press Ott D 99 Used Short-cycle feed-through veneer press Pressing surface 2600 x 1400 mm LW Maximum opening width 150 mm Specific pressure 5.0 - 6.0 kg/cm2 Infeed conveyor belt, length 2800 mm Outfeed conveyor belt, length 2800 mm Transport dimensions approx. 6600 x 2500 x 2600 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Dsdsy A Rhkspfx Aiwsut Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location