Used Ott Pacific for sale (72)

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Bledpexc Hhkofx Aafsc

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Edge thickness: 0.2–12 mm Feed: 12 m/min Glue application roller, synchronous and counter-rotating Automatic infeed fence Jointing/edge trimming Blsdpfjw Ni Nrjx Aafoc End trimming up to 3 mm Flush milling at 15°, 30°, 45° Radius milling R 2 – R 5 Flush sawing Corner rounding Radius scraper blade Schwabbl cleaning unit Extendable roller support Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Bodpfx Aehy Tlroafelc (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1999, Edge thickness: 0.2 - 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (strip edging) Minimum length: 60 mm (from coil) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port diameter: 160 mm Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment/features: Blsdow Amt Nspfx Aafec - Double top pressure with electronic height adjustment - Automatic magazine for coil edging up to 800 mm diameter - Pneumatic guillotine for strip edging up to 3 mm - Automatic infeed fence Pre-milling unit: with 2 HF motors, 1.5 kW, 12,000 rpm Double cross-cut saw: - 2 HF motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Radius trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Surface scraper Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: H/32059, feed rate X-axis: 22 m/min, workpiece height (max.): 50 mm, TECHNICAL DETAILS Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Bjdpjydibwsfx Aafslc Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: used, Platters 300cm/125cm Bedpfx Aajyf Eniofelc divisible into 3 pieces 380V Cold press

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Blodpfxeyfw D As Aafoc Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Shelf width 136 cm Shelf length 260 cm 18 kW Blodeygxblopfx Aafec

Condition: used, Year of construction: 1977, Max. pressing length: 2550 mm Max. pressing width: 1200 mm Specific pressing pressure: 2.7 kg/cm² Total pressing pressure: 80 t Press opening width: 400 mm Heating plate material: gold anodised Operation: rotary switch Number of pressure pistons: 4 pcs Safety tear-off cable: Yes Condition of heating plate: good Weight approx.: 3600 kg Blodpfsygm A Dsx Aafsc Storage location:

Condition: used, Year of construction: 2023, functionality: fully functional, For Sale: OTT Unimatic 25.8F Edgebander with Ligmatech ZHR 15 Return System We are selling an OTT Unimatic 25.8F edgebanding machine combined with a Ligmatech ZHR 15 return conveyor table. The units are sold exclusively as a complete set (line). Bljdsygl A Ajpfx Aafsc Key Features and Customizations: Custom Grooving Units: The machine has been upgraded with two additional milling units—one for lateral grooving from the front and one for vertical grooving from the top. It was primarily used for the production of interior door frames. Stability Upgrades: Custom-built stabilization rollers have been added to the interior side to ensure precision when processing narrow workpieces. Recent Maintenance: Last year, the glue application unit (including the roller) was completely replaced with a new one. The track pads (shoes) were also replaced. Condition and Dimensions: Condition: The machine is rarely used but has been regularly maintained and serviced by TIBO. It is currently in full working order and available for testing on-site. Dimensions: Total line length is 11m, width is 2m. Serious inquiries only, please.

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works. Bodpfx Aaswx Rrnjfjlc

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressure: 2.8 – 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety release line Safety frame Push-button control Connected load: 19.3 kW External dimensions: 2960 x 1490 x 1890 mm Storage location: Supplier Bledpfx Aaexy Tl Rjfsc

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Bljdpsxwyhtofx Aafsc Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz Bsdpfoych Igsx Aafjlc 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Bedpfx Asvvkfqsafolc Storage location: Nattheim

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Bodpfx Aaoyaq Rfofolc Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 13939, total width: 1,520 mm, total length: 3,550 mm, total height: 2,000 mm, type of input current: three-phase, temperature: 120 °C, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 400 bar, We are offering this used OTT Stabil-3013 veneer press, year of manufacture 1984. Bjdpfxoyc Hyzj Aafjlc Model: Stabil-3013 Machine number: 13939 Rated voltage: 380 V Current type: AC • Pressing area: 3,000 × 1,350 mm • 6 cylinders • Interchangeable aluminium plates • Protective film Frequency: 50 Hz Year of manufacture: 1984 If you have any questions or need more information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Bljdpfx Ajv Sm Hcsafoc Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm Bedpfx Aaox Uru Nefslc weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: ready for operation (used), Year of construction: 2001, Ott Deltatronic Wide Belt Sander €9,500.00 excl. VAT Bsdoyatgiopfx Aafslc Ott Deltatronic Magelis control system Sanding thickness: 3-160 mm Sanding width: 1350 mm 3 units Lacquer sanding package Vacuum Satin finishing brush Cleaning brush Pneumatic slider Year of manufacture: 2001 Condition: Fully functional

Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander Bjdpsgi Drysfx Aafjlc - machine in stock - after the technical review - very good condition - German production - year of production 1996 - segment shoe - a perfect solution for varnish / veneer TECHNICAL SPECIFICATIONS: - grinding width 1100 mm - grinding height 1-150 mm - combi unit with task-controlled membrane sanding shoe - engine power 11 kW - blowing on the belt - pneumatic oscillation - two types of belt speed 4.5 and 18 m / s - aggregate with felt roller - engine power 0.75 kW - shaft oscillation - aggregate with a cleaning brush - engine power 0.75 kW - smoothly regulated feed - feed speed range 4-18 m / min - 1.5 kW feed motor power - electric height adjustment - vacum table - 3kW fan motor power - diameter of nozzles 4 x 120 mm and 1 x 150 mm Transport dimensions: - length 200 cm - width 245 cm - height 210 cm - weight 2500 kg 1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm 2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element. 3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg Bjdsu Drugopfx Aafolc

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece Blsdpfeu Rv Rxex Aafjc

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz Bjdpfx Aeu Rv Ttoafolc -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Year of construction: 1994, condition: used, Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine Bsdpfx Aaju Scquefslc -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece