Used Oliver 600 for sale (10,993)

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Pgjdpfju Ey Dlex Ahyok Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Dump belt blast wheel blast machine 7,5 kW direct driven indexing turbine with 8 throwing blades. Belt width 700mm and Ø600mm Pgsdjg S Rt Ejpfx Ahyjk

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Podpfxoxl Dq Uo Ahysgk

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Pedpsw Ivqmsfx Ahyjgk each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2001, condition: excellent (used), Faceplate diameter 600 mm height 130 mm LK Mounting :Diameter 128.5 mm Pedpfx Ahjd Tyvfoysgk Groove width 16 mm Safety thread 200x 4 mm

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Pedpfx Ahornkhyjyegk Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Pgjdpfxsrnkdye Ahysk Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, total width: 40 mm, total height: 120 mm, clear span: 2,700 mm, TECHNICAL DETAILS: Manufacturer: SSi Schäfer Type: PR 600 Clear span: 2,700 mm Box section: 120 x 40 mm Color: RAL 5010 Gentian Blue Condition: used SCOPE OF DELIVERY: 1 x pallet racking beam 2 x safety pins Note: The minimum order value is €100 net. YOUR CONTACTS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY This item is offered for collection. We are happy to assist you with transport and assembly. Delivery or shipment is possible at extra cost. Additional charges depend on the delivery location and the scope of the consignment and can be requested individually from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is per piece/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and crafts. We continuously offer you attractive used equipment from various manufacturers/brands on favorable terms. If you have any questions, please do not hesitate to contact us. Pjdsumv Arepfx Ahyjgk ✅ Four Wins – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X394V02886, Year of construction: 2019, operating hours: 15,499 h, load capacity: 5,000 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: gas, DGUV certified until: 02/2027, fork length: 2,400 mm, Equipment: UVV, Service + UVV 02/2027 5,000 kg 3rd & 4th Valve Fork Positioner Forklift LPG Forklift No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lift height: 3,700 mm Overall height: 2,870 mm Fork length: 2,400 mm Free lift: 150 mm MACHINE DETAILS Pedpfxoyzf Ame Ahyegk Mast type: Freisicht (Clear View) Drive type: LPG (liquefied petroleum gas) Dimensions & Weight Dimensions (L x W): 5,500 x 1,450 mm Weight: 7,500 kg Operating hours: 15,499 h EQUIPMENT • Ex-Linde full-service machine • Next service due in 858 operating hours • Safety inspection (UVV) valid until 02/2027 • Facelift model with tilt angle display (practical for sensitive goods) • 3rd & 4th hydraulic valve • Fork positioner with sideshift • Full cabin with heater and windscreen wiper • Comfort seat with lumbar support and seat heating • LED work lights front and rear • Blue safety light at rear Note: Dismantling of the mast can be optionally offered by the seller for €950 net. All dimensions are approximate. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Loading from the side up to 5 tons is possible with a large forklift on site at your own risk. Collection ONLY with an email confirming payment receipt! Collection WITHOUT prior appointment possible Monday to Friday, 7:00 am – 4:30 pm. A mast that is too high for transport can be dismantled on request. In the event of delayed collection, a storage fee of €20 per machine per day will be charged (payment required before collection).

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C Pedpfx Asy Hkblohyjgk - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Pjdpfx Ahjy Hkazoyjgk Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound insulation hood DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With integrated refrigeration dryer, 660 l suction capacity, 520 l output volume Pgjdpfx Aoypkr Uohyjk - 10 bar - Weight: 245 kg - Sound-damping hood - Condensate drain 4 kW, 400 Volt - Width: 960 mm, Depth: 740 mm, Height: 1905 mm - Noise level: 69 dB (A) - Barely any operating hours - IN ABSOLUTELY AS-NEW CONDITION Transport possible at extra cost!

Condition: excellent (used), functionality: fully functional, Minimax Router 600 Overhead Spindle Moulder Spindle to arm distance: 600 mm Two-speed spindle drive motor: 2.2/1.5 kW Pgodjy Hhv Tspfx Ahyok Two spindle speeds: 9000/18000 RPM Spindle tilt adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Height-adjustable work table Pneumatic spindle control with foot pedal

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Podpfx Ajvvi Anjhyegk Storage location: Supplier

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Pedpfx Ajy Dp U Ejhysgk Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: November 2011 Pgjdpfx Ahey Dp Ursyjk Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 cc Clamping unit: Clamping force: 60 t Type distance: 370 x 370 mm Clamping platen size: 510 x 510 mm Ejector: electric Clamping unit: toggle-type Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control system with hot runners x 12 Hardened injection unit - bimetal Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by the servo motor Driven by an inverter Machine with cylinder/battery with compressed nitrogen (additional charging for fast work) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68 x 1.45 x 2.04 m All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1995, Arburg 370C 600-100 Year of construction: 1995 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 60 t Distance between tie bars: 370x370 mm Size of the clamping platens: 570x570 mm Pjdpfx Ajy Dp T Ujhyogk Ejector: hydraulic Clamping unit: hydraulic Control system: DIALOGICA Additional equipment: Air valve x 1 Hydraulic core pull x 2 Dimensions: Weight: 3600 kg Length/width/height: 4.30x1.59x2.08 m Drive: Pumps/motor: 11 kW Heating output: 4.2 kW Total output: 15.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Pedpsy Dp Ulofx Ahysgk Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,678 h, load capacity: 4,500 kg, lifting height: 6,010 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Non Marking Front tires condition: 80 - 100% Rear tires type: Non Marking Rear tires condition: 80 - 100% Battery voltage: 80V Battery type: PzS Battery year: 2021 Battery condition: 80 - 100% Sideshift, Pgedpoy E Uw Uofx Ahyjk 3rd valve, 4th valve, rear work light, front work light, heater, road approval (StVZO), full cabin, full free lift, LED,

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Linde H 50D-01/600 Drive Diesel Year built 2023 Pgjdpey E Ubajfx Ahyok Lifting height (mm) 3,770 Lifting weight (kg) 5,000

Condition: used, Year of construction: 2007, operating hours: 27,953 h, machine/vehicle number: 6915, spindle speed (min.): 10 rpm, spindle speed (max.): 600 rpm, controller manufacturer: Siemens, tool diameter: 600 mm, Denn RL-600 CNC Machine Data Designation: Denn RL-600 CNC Pgodpfx Aoy E Hgzjhyok Installation Dimensions: approx. 1400 × 5000 × 3500 mm Operating Hours: 27,953 hours Workpiece Data Max. Workpiece Diameter: 600 mm Min. Workpiece Diameter: 100 mm Centre Distance: 5,300 mm Performance Data Main Spindle Speed: 10–600 rpm Max. Feed Rate: 5 m/min Control / Technology CNC Control: Siemens Sinumerik HMI: PC-based control panel USB Port: for backing up the machine program CAD/CAM Interface: DXF (AutoCAD 2002 LT)

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Pgsdogydn Iepfx Ahyjk Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 number of tool places 20 Pos. In our assessment, the machine is in good used condition Pgodpfsy Ez Efox Ahyjk and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Travel distances: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 rpm Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg Pgjdey Eyfwopfx Ahysk

Condition: used, all stainless steel Pjdpfxsy Eya Us Ahyogk mobile adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm