Used Oliver 600 for sale (11,226)

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 360 mm, total length: 820 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ Bsdpfxoxwp A He Ai Njwr • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,954 h, load capacity: 3,000 kg, lifting height: 4,830 mm, free lift: 1,444 mm, fuel type: electric, mast type: triplex, construction height: 2,224 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Bodjznpk Espfx Ai Newr Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Battery type: PzS Battery year of manufacture: 2017 Load guard, side shifter, 3rd valve, rear work light, front work light, heater, full cab, interior mirror, rotating beacon, Fabric seat cushion, BlueSpot front and rear, single-pedal operation

Condition: used, machine/vehicle number: 12178, Rotor diameter: 600 mm Rotor width: 750 mm Bwodpfx Ajyr Tnksi Nor 9-blade rotor 6 rows of stator blades Inlet cross-section approx. 750 x 600 mm Drive motor: 55 kW

Condition: new, functionality: fully functional, Year of construction: 2026, Designed for high-capacity mining and quarrying operations, this stationary crushing and screening plant has a production capacity of 600–750 TPH. Equipped with a three-stage crushing system (Primary Impact Crusher + Secondary Impact Crusher + Vertical Shaft Impact Crusher) and multi-deck screening units, it delivers high efficiency while producing high-quality, cubical aggregates. According to the detailed engineering design, the plant consists of the following equipment: Main Equipment Bwsdezqaduepfx Ai Ner Feeding Group TB-60 Vibrating Feed Hopper 60 m³ capacity 2 × 11 kW motors 1400 × 2500 mm Wobbler Feeder 22 kW motor Automatic lubrication system 1000 × 5000 mm Wobbler Under Conveyor 5.5 kW motor Reversible operation PDK-1415 Primary Impact Crusher 355 kW main motor 3 kW auxiliary motor Designed for the primary crushing of soft and medium-hard stone TE-1848 Vibrating Screen Screen size: 1800 × 4800 mm 2-deck configuration 18.5 kW motor DMK-03 Secondary Impact Crusher Rotor size: Ø1120 × 1500 mm 315 kW main motor 3 kW auxiliary motor TE-2470 Vibrating Screen Screen size: 2400 × 7000 mm 4-deck configuration 2 × 30 kW motors VSI-1000 Vertical Shaft Impact Crusher Designed with 2 × 315 kW motors Produces high-quality cubical aggregates and premium manufactured sand TE-1650 Vibrating Screen Screen size: 1600 × 5000 mm 2-deck configuration 18.5 kW motor Conveyor Belt System Multiple belt conveyors throughout the plant with widths ranging from *650 mm to 1200 mm* and lengths from *5 m to 30 m* High-speed conveyors (126 dld) for efficient material flow Metal detectors and magnetic separators on selected conveyor lines for foreign material removal Belt-pulley drive systems with heavy-duty drum construction Control Cabin & Electrical System Central control cabin for complete plant operation Individual electrical panels with dedicated circuit breakers for each piece of equipment Total installed power: approximately 2,109.4 kW Why Choose This Plant? Continuous production capacity of 600–750 TPH Three-stage crushing system (PDK + DMK + VSI) for producing high-quality, cubical aggregates in the desired gradation Accurate product sizing with multi-deck vibrating screens (TE-1848, TE-2470, and TE-1650) Safe and clean production with conveyor lines equipped with metal detectors and magnetic separators Turnkey installation based on a detailed engineering design Customizable capacity and equipment configuration to meet specific customer requirements For more detailed technical information, pricing, and installation planning, please feel free to contact us.

Condition: good (used), Year of construction: 2004, HSK 63 18.000 rpm Bedpfjznmifox Ai Newr Parts shown by hand not come.

Condition: used, Year of construction: 2016, Schuco PDG E Cut 600 LE Profile Sawing Machine, Double Headed, Saw Blade Diameter 600mm (2800rpm), 6600mm Bed, 45, 90 & 135 deg Angle Head, Pneumatic Clamping, Min Cut Length 350, Max 6600mm, Machine Weight 2600kg. S/No. 319 C 1000138 (2016). Country of Origin: Italy Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges. Bwsdpfszqduqjx Ai Nsr

Condition: used, Year of construction: 2016, operating hours: 76,421 h, machine/vehicle number: 016, We are offering this used SIMAR GmbH eDRY 600 eDRY granulate dryer, manufactured in 2016. It has been regularly maintained and is in good working order. Bwodpozqdn Defx Ai Nor If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2004, operating hours: 16,185 h, lifting height: 6,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, Toyota 62-7FDF25 Triplo 600 Freelift/Sideshift Diesel 2004 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can schedule a non-binding appointment for an inspection and/or test drive. Please call in advance; we are not always on-site. Bjdpezqcuvjfx Ai Nowr Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. Bwsdpfxey Twc Nj Ai Nor • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • the chuck has a diameter of 325 mm + is included • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed OPTIONAL approximately 100 different tool holders (VDI holders) Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), machine/vehicle number: 17061, Year of construction: 2019, operating hours: 1,941 h, load capacity: 1,500 kg, lifting height: 6,000 mm, free lift: 2,005 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,550 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire size: 18x7-8, rear tire size: 18x7-8, overall weight: 3,324 kg, 5145471 Bedpozfdz Hofx Ai Newr Serial Number: FN599218 Battery Details: 24V 8PzS 1000Ah (aus 2019)

Condition: refurbished (used), PRESSBRAKE ECLAIR TYPE AP 600 PRESSURE 600t SHEET METAL LENGTH 6000mm WEIGHT 60000kgr IN TOP CONDITION Bjdpfehxyhksx Ai Njwr

Condition: used, Year of construction: 2000, operating hours: 65,000 h, functionality: unexamined, machine/vehicle number: BA 850 CD Plus, clamping force: 850 kN, screw diameter: 1 mm, clearance between the columns: 1 mm, column diameter: 1 mm, displacement volume: 1 cm³, injection pressure: 1 bar, injection weight: 1 g, mold height (min.): 1 mm, ejector force: 1 N, ejector stroke: 1 mm, total length: 1 mm, total width: 1 mm, total height: 1 mm, type of input current: AC, input frequency: 50 Hz, input voltage: 360 V, input current: 1 A, 4x Battenfeld BA 600 / 850 CD Plus - EX LEGO - 38.641h / 73.827h - Dry Storage Location: 5932 Humble, Langeland Island, Denmark - BRIDGE CONNECTED - NO FERRY NEEDED! Storage: Dry indoor hall, immediately available History: All machines from same LEGO subcontractor - only clean material - maintained to LEGO standards - BA CD Plus series with Unilog control FOR SALE - 4 MACHINES: 1. Battenfeld BA 600 CD Plus - 38,641h documented - 57A Motor / 97A Heating - 380V/220V + Trafo - 50Hz - RS232 - Good condition Bjdpfx Ajzp Hy Hei Njwr 2. Battenfeld BA 600 CD Plus - Good condition - 57A Motor / 97A Heating - 380V/220V + Trafo - 50Hz - RS232 3. Battenfeld BA 850 CD Plus - 73,827h documented - 80A Motor / 27A Heating - 380V/220V + Trafo - 50Hz - RS232 - Good condition 4. Battenfeld BA 850 CD Plus - Poor condition / donor for spare parts Condition: All machines running until dismantling. Hour meters 38,641h - 73,827h Technical: Standard 400V / 220V + transformer, 50Hz, RS232 interface Loading: Crane required approx 3.5-5.0t per machine. Bridge connected - no ferry cost. Price: 3.500 EUR each EXW 5932 Humble, Denmark Package Price: 12.000 EUR for all 4 EXW Contact for more photos/information - Videos available on request.

Condition: good (used), machine/vehicle number: 11528, Year of construction: 2014, operating hours: 9,150 h, load capacity: 4,990 kg, lifting height: 6,880 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, battery voltage: 80 V, fork length: 2,400 mm, front tire size: 355/45-15, rear tire size: 21x8-9, overall weight: 8,091 kg, Equipment: cabin, 5233296 Serial Number: 516330E00112 Battery Details: 80V 6PzS 930Ah BJ:2017 Bwsdpfx Aiszp Hqxe Njr

Condition: good (used), machine/vehicle number: 14352, Year of construction: 2022, operating hours: 5,409 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, battery voltage: 80 V, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 23x9-10 weiss, overall weight: 8,258 kg, Equipment: cabin, 5112277 Serial Number: 516337L00138 Battery Details: 80V 6EPzS 930Ah (aus 2022) Bwjdpfx Aieyv S I Sj Nor

Condition: good (used), machine/vehicle number: 14351, Year of construction: 2022, operating hours: 3,638 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,550 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, battery voltage: 80 V, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 23x9-10 weiss, overall weight: 8,300 kg, Equipment: cabin, 5132079 Bwjdpfxoy Aq Dls Ai Njr Serial Number: 516337L00239 Battery Details: 80V 6EPzS 930Ah

Condition: good (used), machine/vehicle number: 14350, Year of construction: 2022, operating hours: 4,888 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,550 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, battery voltage: 80 V, fork length: 2,400 mm, front tire size: 355/50-15 sit weiss, rear tire size: 23x9-10 weiss, overall weight: 8,300 kg, Equipment: cabin, 5132015 Bwjdpfx Aey Aq Anji Nor Serial Number: 516337L00238 Battery Details: 80V 6EPzS 930Ah (aus 2022)

Condition: good (used), machine/vehicle number: H2X388 V01279, Year of construction: 2019, Offer 26113 Approximate technical specifications: - Operating hours (meter reading) approx. 3093 h - Load capacity approx. 3500 kg - Lifting height up to approx. 3750 mm - Duplex mast - Fork length approx. 1350 mm Bwjdpfx Asyznazsi Ner - Fork length hydraulically extended up to approx. 2350 mm - Hydraulic fork adjustment min. / max. 510 to 1350 mm - Space requirement with forks approx. W 1450 x L 4200 mm - Overall height approx. 2690 mm - Weight approx. 7800 kg - Hydraulic side shifter + hydraulic fork adjustment - Hydraulic fork extension approx. 1000 mm - Work lights, front and rear - Suspension seat with seat heating - Battery, year of manufacture 2020

Condition: ready for operation (used), functionality: fully functional, planing width: 600 mm, tool diameter: 120 mm, number of blades: 4, total width: 600 mm, total height: 160 mm, Robust four-sided planing machine from BRUGG, manufactured in Switzerland. This machine is designed for professional wood processing – its stable construction, large working width, and powerful motors ensure efficient and precise operation. The machine has undergone a complete inspection. TECHNICAL SPECIFICATIONS: - Planing width: 600 mm - Planing height: 160 mm - 2 side motors: 2 × 5.5 kW - Main shaft motors: 11 kW + 5.5 kW - Four-sided machine - Solid cast iron construction - Production: Switzerland - 4-knife cutterblock Advantages: - Strong and durable construction, - Large working width of 600 mm, - Ideal for carpentry workshops and the production of wooden components, - Precise material processing, - Ready for operation Bwodpezp Ecyefx Ai Ner Very good visual and technical condition. The machine can be started and inspected on-site. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm Bwedpszdq R Ejfx Ai Njr -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Bwjdpfx Aisxrg S Is Nor Travel: X-axis: 398mm Z-axis: 1250mm Tailstock : Tailstock travel: 1150mm

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lifting height 9 meters Bwjdpfx Aijqiz N Rj Nor

Condition: good (used), Pot diameter: 600 mm Bwjdpfx Ash Rfffji Njr Vibration: adjustable

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Bwjdszmrmyopfx Ai Njr Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), CTS Type: C-70/600 CTS C-70/600 Climate Test Chamber Air-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface as per documentation Digital outputs for test specimen control Test chamber dimensions as per documentation: Bsdpfezmq Tlex Ai Nowr approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including existing documentation / operating manuals Scope of delivery as shown in the pictures The device can be inspected by appointment. Loading with a forklift can be arranged. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Bwsdszmqx Ispfx Ai Nor Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.