Used Oliver 600 for sale (11,238)

Condition: used, - Manufacturer: Hackemack Klsdpfx Ahjxz Hb Uj Nel - Working width: 1300 mm - Roller diameter: 65 mm - Roller pitch: 100 mm - All rollers with rubber surface - Infinitely variable feed via handwheel - Feed speed approx. 2 - 8 m/min - Length: 1,900 mm + folding table 600 mm, 2,500 mm - Voltage, Hz: 400 V / 50 Hz - Location: In stock, D-32825 Blomberg

Condition: excellent (used), Year of construction: 2004, Engel ES 3550/600 HL Kodpex Up Umsfx Ah Nell Technical Data Year of manufacture: 2004 Clamping Unit: Clamping force: 6000 kN Platen size (W x H): 1480 x 1300 mm Minimum mould height: 500 mm Maximum mould height: 1700 mm Opening stroke: 1200 mm Ejector stroke: 250 mm Ejector force: 110 kN Injection Unit: Screw diameter: 80 mm Shot volume: 1960 ccm Specific injection pressure: 1730 bar Screw length: 22 l/d Dosing stroke: 390 mm Number of heating zones: 6 Nozzle stroke: 700 mm

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE Klsdsx Upt Ajpfx Ah Njl

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Klodpfewpq Evsx Ah Nsl Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,144 h, load capacity: 5,000 kg, lifting height: 7,410 mm, fuel type: diesel, mast type: triplex, construction height: 3,530 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, Kedpfjx Twqasx Ah Nell 3rd valve, 4th valve, half-cab, soot filter,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 8,662 h, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Kljdpfx Aex Twppjh Nel Sideshift, fork positioner, 3rd valve, 4th valve, heating, soot filter, full cab,

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 18/16 Nm - Gereedschapswisselaar met 150 posities Opties die op deze machine worden gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning Ksdpfox Twa Iex Ah Nell 6 - Koelvloeistoftemperatuurregeling 7 - hoge drukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Admission in spindle (ISO): HSK-E40 Power on the spindle: 45/40 kW Number of axes: 5 AXIS simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: excellent (used), Year of construction: 2012, operating hours: 10,774 h, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, power: 18 kW (24.47 HP), total height: 2,810 mm, total length: 3,800 mm, total width: 1,150 mm, color: other, Year of manufacture: 2012 Empty weight: 5.447 kg Lifting capacity: 2.500 kg CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Germany Kjdpjyayn Hjfx Ah Noll Durwen fork clamp with side shift, Non-marking tires

Condition: used, Year of construction: 2012, 1 piece 3-axis machining center, make Kunzmann model WF 600 CNC, year 2012, serial no. 610149, control unit Heidenhain iTNC 530, recorded operating hours 18,848, spindle 1,781 h, program run 1,645 h, milling table approx. 800x400 mm, 6 T-slots, max. load 300 kg, XYZ - 600x400x400 mm, machine weight 2,200 kg, internal no. 12 Category: Machinery and technical equipment Award subject to reservation: The award of this item is subject to reservation and irrespective of the achievement of the minimum price. A decision regarding the award will be made as soon as possible. Klsdpfjyaw N Iex Ah Nel

Condition: used, total height: 1,900 mm, total width: 1,850 mm, total length: 1,630 mm, Empty weight: 1.500 kg Kjdpfx Ahsx Tu D Ds Nell - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 6.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table length [mm]: 800 - Table width [mm]: 400 - Tool holder: ISO40 - Main spindle power [kW]: 2.2 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - Transport dimensions: 1630mm x 1850mm x 1900mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 008397, X axis working area: 3650 mm Y axis working area: 1520 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Klodpfxjx S Epbs Ah Nel Total number of tool changer positions: 16

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 17,966 h, load capacity: 2,500 kg, lifting height: 4,590 mm, free lift: 2,290 mm, fuel type: electric, mast type: duplex, construction height: 2,925 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Kjdpeyavzcefx Ah Nell Condition: Ready for operation and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Condition: used, Clipping machine Manufacturer: Poly Clip Model: PDC 600 Semi-automatic double clipper Width: 1.000 – 1.100 mm Depth: 780 mm Height: 1.795 – 2.005 mm Weight: 118 kg Compressed air: 4 – 6 bar / 0,4 – 0,6 MPa Air consumption: 4 bar 6,5 NL/cycle Air consumption: 6 bar 8,5 NL/c Kedpfevy Trzex Ah Nell S-Clip: S 625, S 628, S 632, S 638

Condition: used, Washing machine Manufacturer: Nowicki Model: MPU-600/1P Made of stainless steel Dimensions: 390x140x200cm Electric power: 7.7kW Voltage: 3 x 400V 50Hz Kjdpjttz Urefx Ah Noll Weight: 740kg

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 9 kVA, torque: 82 Nm, controller manufacturer: Siemens, table width: 560 mm, table length: 900 mm, table load: 600 kg, rotational speed (max.): 12,000 rpm, overall weight: 5,200 kg, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Vertical machining center Ksdpfxew Ei E Hj Ah Nell DMG MORI SLIMline Multi-Touch Control Table size: 900 x 560 mm Table load capacity: 600 kg Direct path measuring system X, Y, Z SK 40 spindle taper 20 bar internal coolant supply 60-position tool changer Chip conveyor Renishaw probing kit for SIEMENS control

Condition: used, Year of construction: 2010, Sanovo OptiGrader 600 – 18 Packing lanes – built 2010 Offered for sale: a Sanovo OptiGrader 600, built in 2010, with a capacity of 216,000 eggs per hour (600 boxes per hour). This grader is equipped with 18 packing lanes, is in good but used condition and will be available very soon. 🔷 Description of the machine The Sanovo OptiGrader 600 is a professional egg grader known for its gentle egg handling, high capacity and reliable performance. The system is equipped with digital scales with an accuracy of 0.1 grams, ensuring very accurate sorting. The easy calibration and customer-friendly operation make this machine particularly suitable for daily intensive use. The machine has always been serviced by the dealer and comes complete with combi Loader. The rig can be viewed running in production. 🔷 Technical specifications Specification Description Brand Sanovo Type OptiGrader 600 Year built 2010 Capacity 216,000 eggs per hour Capacity (boxes) 600 boxes per hour Number of packaging jobs 18 Egg treatment Gentle handling of eggs Cleaning Klodpeyaubzefx Ah Nsl Weighing Digital scale, 0.1 g accuracy Calibration Simple Operation Customer-friendly Detection Crack and dirt detection Loader Combi loader Maintenance Always dealer-maintained Condition Good, used condition Availability Available very soon Viewing To view in production 🔷 Modules & equipment Crack detection Dirt detection Traystackers on the first 2 packing lanes Combi Loader 🔷 Features & benefits High capacity: 216,000 eggs per hour 18 packaging jobs Cautious egg treatment Digital weighing with 0.1 g precision Dirt and Crack detection User-friendly operation Running in production Dealer maintained installation 🔷 State of the machine The Sanovo OptiGrader 600 is in good but used condition and has been technically inspected. This is a complete and neat grading machine that can be reliably used within a professional packing station for many years to come. 🔷 Delivery, transportation & support Machine is available very soon Delivery by arrangement Transportation and support worldwide negotiable 🔷 Contact Are you interested in this Sanovo OptiGrader 600 or would you like additional information or to schedule a viewing? Please contact Bos Technical Support BV without obligation. All information in this ad has been compiled with care. Nevertheless, no rights can be derived from the content. Bos Technical Support BV accepts no liability for any errors, omissions or changes in specifications, prices or availability.

Condition: used, Year of construction: 2008, fuel type: hybrid, Weights Empty weight: 7.723 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.040 cm Kedpfx Aev Ti Hzoh Nell CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1350 m Max swing of platform in degrees: 400 Transport dimensions (LxWxH): 10,15x2,42x2,57 Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: M 600 JP Year of build: 2008 Condition: Used Data: Max. working height: 20,39 m Platform height: 18,39 m Max. reach: 13,54 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,83 x 0,76 m Swivel range: 400° Max. climbing capacity: 30% Transport dimensions LxWxH: 10,15 x 2,42 x 2,57 m Drive type: Hybrid Tyres: abrasion-free Wheelbase: 2,74 m Ground clearance: 0,30 m Own weight: 7.723 kg Special features: Swivel work basket 180°, cage arm/vertical rotation angle 145°, white tires. Location: 41468 Neuss immediately available

Condition: excellent (used), Surface plate Space requirement : Width 600 mm depth 500 mm Height 90 mm Klodpfx Ahjg Af U Ee Nel

Condition: good (used), Top support Kledpfx Aoccrqfoh Nsl Bolt circle 180 mm Depth 230 mm width 600 mm Height 460 mm

Condition: like new (used), Spindle bearing Kodpfx Ahsdvvtls Nsll Brand Union Working RADIUS 600 mm Spindle diameter 130 mm

Condition: used, Year of construction: 1998, MACHINE WAS USED BY THE PREVIOUS OWNER SOLELY AS A PUNCHING MACHINE; THE LASER NEEDS TO BE CHECKED IF REQUIRED! Comes with TRUMALIFT SHEETMASTER 1606 TECHNICAL DETAILS Combined Punching/Laser Operation: 2,585 x 1,650 mm Punching Operation: 3,085 x 1,740 mm Laser Operation: 3,085 x 1,650 mm Performance Laser Power: 140 - 2,700 W Maximum Sheet Thickness: 8 mm Cutting Capacity – Mild Steel: 8 mm Cutting Capacity – Aluminum: 4 mm Cutting Capacity – Stainless Steel: 6 mm Maximum Punching Force: 220 kN Active Hold-Down (programmable in stages): 4.5 - 20 kN Maximum Workpiece Weight: 230 kg Speeds Max. Positioning Speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis Punching: 60 rpm Thread Forming: 180 rpm Stroke Rate Punching (E = 1): 900 1/min Marking: 2,800 1/min Tools Kedpeyar Dgsfx Ah Nell Linear Magazine: 18 tools with 3 clamps Tool Change Time: 1.5 - 5 s Precision Position Deviation: ±0.10 mm Mean Position Scatter: ±0.03 mm Programmable Chutes for Punching and Laser Parts (max.) Size: 500 x 500 mm TRUMPF CNC Control: Siemens Sinumerik 840D (base system)

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unllog 4000 Closing 60 TO Year 1997 Kedpfx Ahjg Emvhs Nsll Scrow 30 mm Injection weight approx. 90 g

Condition: excellent (used), Year of construction: 2008, TTW Klsdpfxox A Iqts Ah Nsl TYPE: TFR 600 SG Year of manufacture approx. 2008

Year of construction: 1988, condition: used, Wagner EKG 1,000/600 electric pallet truck Year of manufacture: 1988 Load capacity: 1,000 kg Weight: 2,190 kg Availability: short-term Location: Hesse Kjdpsx Tkgzjfx Ah Nsll

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Kodpex D Iywofx Ah Nsll Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling