Used Okuma Lu 300 for sale (236)

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Nksdpfx Ahoyt Nvtevsw Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80 WW fac, HSK 63 holder, stepless B-axis as milling spindle, lower 12-station turret with live tooling, Interlite compact filter system 900 l, extraction, spindle hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Njdeyt H U Topfx Ahvjkw

Year of construction: 2007, condition: excellent (used), X AXIS: 762 MM Y AXIS: 560 MM Z AXIS: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE CONE: BT 40 TABLE DIMENSION: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID FEEDS X/Y AXIS: 40,000 MM/MIN Z AXIS RAPID FEEDS: 32,000 MM/MIN WORKING FEED: 32,000 MM/MIN TOOL WAREHOUSE: 20 PLACES TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM Nkjdpjpyg Rkefx Ahvew CONTROL: OSP-P200M

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Nkjdpfx Ajyha R Rehvjw Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: OSP5000M-G, OKUMA MC-30VA vertical machining center, high-reliability Japanese machine. Fully operational and complete machine, in use until recently. Main features: • Brand: OKUMA • Model: MC-30VA • CNC Control: OSP5000M-G Nkodpfxjyt E H Us Ahvow • Year: 1988 • Vertical machining center with automatic tool changer • Very robust structure, typical of Japanese machines • Complete and non-cannibalized machine The machine can be seen under power at our workshop. Ideal for: • machine shops • technical schools • export to foreign markets • general machining purposes Condition: operational. Sold as is. Loading and transport at buyer's expense.

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from Nkodpfx Ahsyn R S Eovow production facilities that were in operation until they were decommissioned. Condition: used (functional)

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Nksdpfxoyn Em Re Ahvew Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Nksdeyttwzjpfx Ahvjw

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Nkodewzzrkopfx Ahvsw

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Nksdpfx Ajym Na Eehvew Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Year of construction: 2022, condition: excellent (used), Machine Specifications​ Imperial Metric CNC Control Yes Control Type OSP-P300LA-e Njdpfjymq Ukjx Ahvokw # of Axes 2 Swing 20.47" Turning Diameter 16.14" Center Distance 43.31" Chuck Size 10" Bar Capacity 3.15" X-Axis Travel 9.05" Z-Axis Travel 45.04" Spindle Nose A2-8 Spindle Speed 3,000 rpm Main Motor 20 HP Turret Capacity 12 Tailstock (Yes/No) Yes

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC Lathe Manufacturer: Okuma Model: LB15 II-M 1SC-1000 Year of Manufacture: 1996 Control: OSP-7000L Country of Origin: Japan Delivery: Ex-stock Machine Features - Long turning length - Tailstock - Chip conveyor - Live tooling - One touch - IGF - Touch setter Technical Specifications - Working Areas - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel Distances - X-axis: 260 mm - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Standard spindle bore diameter: 62 mm - Spindle front bearing bore diameter: 100 mm - Chuck passage: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station to station: 0.1 sec Feed Rates - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Main Drive - Spindle motor: 15/11 kW Machine Dimensions: approx. 3315 x 1895 mm Machine Height: approx. 1905 mm Weight: approx. 5700 kg Optional Nkjdpfjyrtkrjx Ahvsw - Transport organization and handling - Machine installation and setup - Commissioning of the machine

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Turning length 1500 mm Kuka robot 140 kg without handling attachment Nedoyrf T Sjpfx Ahvekw 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Nkodpoyrf I Aefx Ahvow Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: used, Year of construction: 2019, 2019 OKUMA MA600HII 4-Axis Milling Machine with OSP P300M Control, 630 x 630mm Table max loads up to 1,200kg, high-speed Spindle 12,000rpm, Traverse Speed 60m/min, full-size Tool Magazine with 171 Stations, X Axis Travel 1000, Z Axis Travel 1000, Y Axis Travel 900. S/No. 224574 (2019) A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Nksdjyplrpepfx Ahvew Location: These lots are located in Mielec, Poland. Please visit our website for more details. Auction 3459

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning length: 650 mm, turning diameter: 420 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 675 mm, overall weight: 5,500 kg, Machine Equipment ▪ Interior suction system by Hengst Filtration (year of manufacture 2023) ▪ Touchsetter, tool measurement ▪ C-axis (main spindle) ▪ Tool breakage and wear monitoring ▪ 3-jaw chuck, Kitagawa B210, Ø250 mm ▪ Tailstock available ▪ Coolant supply, including through-tool supply ▪ Dialog programming IGF Nkodpfx Aoypkziohvjw ▪ Chip conveyor (scraper type) Technical Details ▪ Max. turning length: 650 mm ▪ Max. turning diameter: 420 mm ▪ X-axis travel: 300 mm ▪ Z-axis travel: 675 mm ▪ C-axis travel: 360° ▪ Chuck passage: 72 mm ▪ Spindle bore: 95 mm ▪ Clamping cylinder bore: 95 mm ▪ Tool holder: VDI 40 ▪ Number of tool stations: 12 ▪ Spindle speed: 2,800 rpm ▪ Main spindle power: 22/30 kW ▪ M-spindle – driven stations: 12 ▪ M-spindle power: 5.5 kW ▪ M-spindle speed: 3,000 rpm ▪ Machine dimensions without accessories (LxW): approx. 2,700 x 1,900 mm ▪ Machine height: approx. 1,885 mm ▪ Weight: approx. 5,500 kg Options ▪ Organization and execution of transport ▪ Machine delivery and installation ▪ Machine commissioning

Condition: good (used), Year of construction: 2006, 3-axis machining center Okuma MB-66 VA Control: OSP-P 200M Year of manufacture: 2006 X-axis: 1,500 mm Y-axis: 660 mm Z-axis: 660 mm Tool holder: SK 40 MASBT Tool magazine: 32 stations Spindle speed: 8,000 rpm Equipment: ONE touch IGF Hinged belt conveyor Electronic handwheel Nkedpfx Ajylwp Sjhvjw Internal coolant supply 20 bar

Condition: good (used), Year of construction: 2005, Vertical Machining Center Okuma MB 46-VAE Control: OSP-E100M Year of manufacture: 2005 Travel Paths: X-axis: 600 mm Y-axis: 460 mm Z-axis: 460 mm Max. workpiece weight: 500 kg Clamping area: 1,000 x 460 mm Spindle taper: SK 40 DIN ISO 69871 Nkjdpfeylwdcex Ahvew Tool magazine: 32 stations Spindle speed: max. 15,000 rpm Equipment - ICS / Internal coolant supply - Chip conveyor - USB drive

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MA-40HA Year of manufacture: 2001 Control: OSP-U100M Spindle hours: 21,478 Country of origin: Japan Delivery time: ex-stock • In excellent condition! • Well maintained! • Immediately ready for operation! Machine Equipment - Number of axes: 4 - Spindle speed: 15,000 rpm - Touch setter (tool breakage control and tool measurement) - 2-pallet automatic pallet changer (APC) - ATC magazine with 60 tool positions - Through-spindle coolant (cooling system), bag filter system 20 bar - Signal tower - Chip conveyor Nksdpfxsycguxs Ahvsw Technical Data - Travels X-axis 560 mm Y-axis 610 mm Z-axis 560 mm Spindle center to pallet surface 50~660 mm Spindle nose to pallet center 150~710 mm - Table Pallet size: 400 x 400 mm Max. load capacity: 400 kg Max. workpiece size: 600 x 710 mm Indexing time 2.3 sec. (90°), 3.0 sec. (180°) - Spindle BT40 Bearing diameter: 70 mm Speed: 15,000 rpm - Feed rate (X, Y, Z) 40,000 mm/min - Motor Spindle: 15/11 kW - ATC Magazine capacity: 60 tools Tool type: BT40 Max. tool length: 300 mm Max. tool weight: 10 kg - APC Pallet changer: 2-station Pallet change time: 7 sec. - Power 45 kVA Machine dimensions: approx. 2,480 x 4,164 mm Machine height: approx. 2,720 mm Weight: approx. 10,000 kg Optional Transport organization and execution Machine installation and setup Machine commissioning and handover ready for production

Condition: excellent (used), Year of construction: 2013, CNC Turning and Milling Center Okuma Multus B400II-W 2000 Control: OSP-P 300S Year of manufacture: 2013 X-axis: 690 mm Y-axis with travel: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° increments Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80 stations Equipment: - Collision avoidance system - Tool monitoring system - Tool measurement device - Tool presetting - Subspindle with tailstock function - Renishaw probe - Automatic door - NC steady rest carrier with SMW SLU-Z 3.2 steady rest - ONE touch IGF - Hinged belt conveyor Nodpfx Aeyk Tv Eshvokw - Main spindle replaced in 2022

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Year of manufacture: 2014 Spindle hours: approx. 2,050 h Travels: X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Nsdeyk Tq Aspfx Ahvekw W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Spindle mounting: HSK 63 Total tool stations: 40 Accessories: XA and YA axes equipped with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw probe for X/Z axes Measurement in Y-axis including angled axis measurement Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 hollow chuck cylinder Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed vibration control Simultaneous 5-axis machining software package Chip conveyor Coolant tank with 70 bar high-pressure pump

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Turning diameter: 650 mm Turning length: 1,500 mm Spindle interface: Capto C6 Total tool stations: 80 Equipment: - NC tailstock - Travelling hydraulic steady rest AX 5 on NC axis - Coolant system with band filter - Kitagawa BB 212-11 hydraulic 3-jaw chuck - Automatic tool touch setter - High-pressure coolant system (IKZ) Nodpfx Ahoyk Ddgjvskw - Software option High Cut Pro (High-accuracy package with Super Nurbs) - CAS collision avoidance system - Main spindle orientation, electric - Multitool with turning function for Y-axis - Helix function - Automatic main power shut-off - DNC-DT interface - Machining Navi M-i (milling), speed control to minimize vibration - One-Touch IGF - Chip conveyor

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Nksdpfxjxrnr No Ahvjw Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Nodpfox Ed A Djx Ahvskw Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR Nkodpoym Tidsfx Ahvsw - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.