Used Oil Field Lathe for sale (19,905)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Gedpfx Ajxlffysfiobu Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar passage: 51 mm, Lathe with LNS bar feeder & additional equipment! The machine has been completely inspected and geometrically measured by the seller. It is ready for immediate use! TECHNICAL DETAILS Gedpfx Afexg D Amjiebu Travel X-axis: 240 mm Travel Y-axis: 100 mm Travel Z-axis: 495 mm Max. machining diameter: 320 mm Bar capacity: 51 mm Main spindle speed: 5,000 rpm Main spindle motor power: 22 kW Sub spindle speed: 5,000 rpm Sub spindle motor power: 22 kW MACHINE DETAILS Control: Mazatrol640T EQUIPMENT 2 x 12-station turrets with driven tools CNC option package EIA / ISO programming Tool eye Partition wall Automatic parts catcher with conveyor belt LNS short bar loader Quick Load Servo III High-pressure coolant 10 bar Chip conveyor Mayfran ConSep 2000 II

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,280 h, functionality: fully functional, machine/vehicle number: NL201FH1430, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, TECHNICAL DETAILS Turning diameter: 356 mm Turning length: 510 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Bar diameter: 65 mm Travel X-axis: 260 mm Travel Z-axis: 590 mm Spindle drive: 15 kW Spindle speed: 5,000 rpm Turret stations / with drive: 12/12 Rapid traverse - longitudinal/flat: 30 m/min MACHINE DETAILS Control: MSX 850 3 Electrical Data Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Rated current: 110 A Rated spindle motor current: 131 A Total power requirement: 32 kW Dimensions & Weight Installation space: approx. 2,320 x 1,783 x 1,819 mm Machine weight: approx. 5.8 t Operating Hours Gsdpfx Afoxhf Efoiebu Spindle hours: 12,280 h Machining hours: 13,579 h EQUIPMENT Chip conveyor Extraction unit Tool setting arm Parts catcher Double foot switch

Condition: like new (used), Year of construction: 2022, operating hours: 12 h, functionality: fully functional, machine/vehicle number: A320A/3798, Machine is purposed for orthopedic implant. Equipped with thread whirling tooling, enable very fast orthopedic / compression locking implant screw manufacturing. Gbsdpfxsw Il Nlo Afiou Condition is very prime, bought but never used for real production (only for research and development purposes), with around 12 hour TOTAL run-time only.

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: Godpfxoq Nyzbo Afiebu - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Gedpfx Afsxmvzuoisbu Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Year of construction: 1989, condition: used, A used CNC- lathe in good condition with NUM- CNC control Chip conveyor, coolant unit, hydraulic power chuck, jaws and tool holders turning diameter over bed 360mm Turning diameter over support 260mm Max. turning length 625mm Spindle speed 3500 rpm Gbedpsflhcmjfx Afiju spindle passage 42mm Tech. Data and dimensions: Errors excepted. Further tech. data see pdf.- document

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Gjdpfx Afew U A H Ueiebu Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system.

Condition: used, Technical details: floor-plate length: 2003 mm Gbodpjwnfu Njfx Afieu plate width: 1005 mm plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min Gedpfsxmk E Uex Afiebu rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Godpfsvzcplsx Afiobu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: ready for operation (used), Year of construction: 1997, Padovani Labor E255 x 1500 cycle lathe Manufacturer: Padovani Gedsxmkv Hepfx Afiebu Model: Labor E255 x 1500 Year of manufacture: 1997 Condition: Used, good, powered and ready for demonstration

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Gedpsgyy I Aofx Afiebu Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: excellent (used), Year of construction: 2008, operating hours: 4,400 h, functionality: fully functional, Controller Fanuc 0i-TD Swing diameter over bed 400 mm Max. turning diameter D80 mm Max. turning length 220 mm Spindle bore of main spindle D26 mm Spindle bore of counter spindle D26 mm Speed ​​range with main spindle 100 - 6000 rpm Speed ​​range with counter spindle 100 - 6000 rpm Turret 8-fold X travel 80 mm Z travel 280 mm A travel (counter spindle) 220 mm X/Z rapid traverses 1200 mm/min Power of the main spindle 2.5 kW Gjdpfx Aoxmkg Sofijbu Power of the counter spindle 1.5 kW Max power required 5 kVA / 400V Weight cca.. 1600 kg Dimensions LxWxH = 2000 x 1200 x 1700 mm Accessories, features - There are collet chucks both on main- and sub-spindles - Spare tool holders (in Z axis the machine can work in two directions at the same time) - Automatic lubrication system - Cooling water equipment - Machine lamp - Bar feeder interface - Machine documentation on hungarian The machine is in very good condition. Ready for immediate use. Under power in Hungary.

Condition: used, Technical details: Gjdpfx Aswm Ngtefisbu floor-plate length: 2500 mm plate width: 1250 mm plate height: 100 mm transport dimensions LxWxH: 2,53 x 1,25 x100 m Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 through-holes with D=17mm *

Condition: as good as new (ex-display), EXHIBITION MACHINE Gbsdpfstpnddjx Afisu For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Gedpovnwf Isfx Afiebu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min Gbjdpsxmi A Ejfx Afiou diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 1995, turning diameter over bed slide: 810 mm, swing diameter over cross slide: 510 mm, quill stroke: 225 mm, quill diameter: 115 mm, center height: 400 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, bed width: 480 mm, overall weight: 6,400 kg, torque: 3,150 Nm, We are offering you a lathe from the brand "VOEST ALPINE" (WEILER), model E80/3. For further details, please refer to the attached PDF. The extensive range of accessories is also listed there. Best regards, Wiegand Co. Gsdpfx Afsw Tq Tyeisbu

Condition: used, functionality: fully functional, Conventional Lathe WEILER CONDOR VS2 Technical details Spindle bore: 38 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 200 mm Turning length: 750 mm Spindle speed (max.): 2,800 rpm Spindle speed (min.): 12 rpm Overall length: 1,700 mm Overall width: 650 mm Overall height: 1,500 mm Gjdpfjxmg S Rex Afijbu Total weight: 800 kg

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 Gbsdpfx Aow S Efzefiju spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: ready for operation (used), functionality: fully functional, MACHINE DETAILS Weight: 14,000 kg Gedpfoxmgyzex Afiebu

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Gbjdpfx Ajvnwfzjfisu Spindle speed 200 - 10.000 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: like new (used), Year of construction: 2025, functionality: fully functional, NOW: Clearance sale of woodturning machines (demonstration machines, exhibition machines and machines from our workshop course). We are selling various lathes with low operating hours that have been used during our demonstration days or in one of our woodturning course rooms. You receive the full warranty. All woodturning machines come complete with drive center, live center, faceplate (or other standard accessories) and user manual. Details and technical specifications for each machine type can be found on our website! Shipping available on request! Available machines: * Drechselmeister Miditec FU 175 SET €999 incl. VAT (€832.50 excl. VAT) * Drechselmeister MIDI 1 Bench Lathe €880 incl. VAT (€733.33 excl. VAT) * Drechselmeister MIDI 2 PLUS Bench Lathe €1,099 incl. VAT (€915.83 excl. VAT) * Drechselmeister TWISTER FU-180 Woodturning Lathe €1,783 incl. VAT (€1,485.83 excl. VAT) * Drechselmeister TWISTER FU-200 Woodturning Lathe €2,293 incl. VAT (€1,910.83 excl. VAT) * Drechselmeister STRATOS FU-230 Woodturning Lathe €2,633 incl. VAT (€2,194.17 excl. VAT) * Drechselmeister STRATOS FU-230 LV Woodturning Lathe €2,845 incl. VAT (€2,370.83 excl. VAT) * Drechselmeister TWISTER XL Woodturning Lathe €3,398 incl. VAT (€2,831.67 excl. VAT) * Drechselmeister STRATOS XL Woodturning Lathe €4,248 incl. VAT (€3,540 excl. VAT) Gsdpfx Aewyn Dkofijbu * Teknatool NOVA COMET-2 DR Bench Lathe €400 incl. VAT (€333.33 excl. VAT) * Teknatool NOVA NEBULA 230 DVR Woodturning Lathe €2,590 incl. VAT (€2,158.33 excl. VAT) * Teknatool NOVA Galaxy DVR Woodturning Lathe €1,990 incl. VAT (€1,658.33 excl. VAT) * RECORD POWER DML 250 Woodturning Lathe €280 incl. VAT (€233.33 excl. VAT) * RECORD POWER CORONET ENVOY Woodturning Lathe €1,799 incl. VAT (€1,499.17 excl. VAT) * RECORD POWER Coronet Herald SET Woodturning Lathe €1,079 incl. VAT (€899.17 excl. VAT) * HAGER STAR 200 MAX SET Woodturning Lathe €2,890 incl. VAT (€2,408.33 excl. VAT) * HAGER HDG 250L Woodturning Lathe €3,990 incl. VAT (€3,325 excl. VAT) * HAGER HDE300 Woodturning Lathe €4,680 incl. VAT (€3,900 excl. VAT) All machines can be inspected at A-5431 Kuchl during our business hours. Subject to prior sale! Related terms: woodturning machine, lathe, turning lathe, bench lathe, woodturning, woodturning tools, wood turning, turning, machine Reference: R-A0117

Condition: good (used), spindle bore: 66 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, quill stroke: 160 mm, quill diameter: 70 mm, center height: 280 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 2,500 rpm, total length: 2,850 mm, total width: 1,820 mm, total height: 1,750 mm, overall weight: 2,750 kg, torque: 1,600 Nm, We offer here a lathe from the brand "WEILER", model E50x1000. Please refer to the attached PDF for details. The extensive accessories are also listed there. Kind regards, Gbedow Trbfopfx Afisu Wiegand Company