Used Npb 40 for sale (21,343)

Condition: excellent (used), Collet chuck Collet chuck SK 40 DIN 69871 Tightening thread M 16 Collet type OZ-467 E length 140 mm Laedpfolwqc Ejx Ancoa 10 pieces with set 150 Euro Single delivery 15 Euro

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Laedpfswzvy Nex Ancja Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Lsdowzvxrspfx Ancjaa Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Ledpfx Ajmnqbtoncoaa

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C - At a relative humidity of up to 90%, 500 W Ledpex Hxkzsfx Ancjaa Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. Ledpfx Ajwmy Rionceaa After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER Lajdpfx Anjrk Eqvecja CSC VALID MARCH 24 SEALING IN WORKING CONDITION 2 UNITS AVAILABLE

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 433 1 005 659 000, empty load weight: 1,500 kg, axle configuration: 4x2, loading space length: 2,000 mm, loading space volume: 2 m³, total height: 3,000 mm, Year of construction: 1960, Filling and packaging machine for filling welded film bags, suitable for snacks or crisps; can be adapted to other types of bulk product filling. Maximum filling speed is 60 units per minute. All key drive components are new after overhaul: motor, gearbox, clutch, and sealing jaws. Includes many spare parts. Machine No. 1 features a double filling station (one drive unit powers two filling stations). Machine No. 2 has one drive unit for a single filling station. Lajdpfxox Htdis Ancea

Condition: as good as new (ex-display), Collet chuck SK 40, Ljdslrt S Nepfx Ancoaa DIN 69871/OZ32 Collet type OZ32 467 E total length 190 mm parts are unused in opened original packing price per piece 12 pieces available weight per piece 2 kg

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Lasdow Niprspfx Ancja Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Motor power: 30 kW; Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Compressor is fully operational. Net price: 12,200 PLN Gross price: 15,006 PLN Link to video below.

Condition: used, -KOM 3099- Lasdowuq A Ejpfx Ancsa CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder - 1x VDI 40 plug Weight: 30kg

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Lajdewgk Raspfx Ancsa

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc Lsdpfx Anjvry T Nscsaa pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, plate length: 2,200 mm, plate width: 1,000 mm, stack height: 1,600 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel length: 2,200 mm Max. panel width: 1,000 mm Max. stacking height of panels: 1,600 mm Number of stations: 2 MACHINE DETAILS Control system: WINDOWS EQUIPMENT CE marking Lodjyxnn Topfx Ancoaa Panel stacking station Station discharge System suction cups Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at its destination. External reference: 7997

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 3449, travel distance X-axis: 800 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 700 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Max. workpiece weight: 700 kg Max. spindle speed: 8,000 rpm Spindle taper: ISO 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,800 mm Total weight: 6,050 kg Lsdpfx Anjyyi Ukocjaa EQUIPMENT 20-position tool carousel with ISO 40 tool holder Various tool holders Documentation Fanuc CNC control

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe Lasdpfx Anjyzyttecea - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Laedsy Er Tgopfx Ancea Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z 3048 x 1016 x 762mm, Table size 3048 x 711 mm, Maximum workpiece weight 1814 kgs Spindle speed 8,100rpm, Spindle taper BT40, Motor 30HP, Lajdpfx Aoy Emyuoncoa Haas control, 30 station ATC

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm Laodpoy Ehyiefx Ancja - with adapter sleeve MK4 to SK40 - Accessories as shown - Storage case Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg good condition

Condition: used, Year of construction: 2003, 40 mm bore capacity in cast iron 46 mm 50 mm M 30 M36 MK 4 throat 300 mm 615x430 mm 200-3000 U/min. 2x14x224 mm Distance spindle/table max. 147/688 mm column diameter 145 mm spindle stroke 160 mm feeds 0,1-0,4 mm/U height of the machine 1885 mm Ljdpfxsy Ehx Se Ancjaa drive motor 1,8/2,9 kW weight of the machine ca. 500 kg

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Lajdpfx Ansy Ehh Tjcja Technical data: Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Grinding width: 150 mm Grinding wheel diameter: 200 mm Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Year of construction: 2019, condition: ready for operation (used), overall weight: 300 kg, This HAIMER UNO 20|40 optical measurement machine was manufactured in 2019. It supports a maximum tool diameter and length of 400mm, with a tool weight capacity up to 20kg. The machine itself weighs 300kg. If you are looking to get high quality measurement capabilities consider the HAIMER UNO 20|40 machine we have for sale. Contact us for more information. Additional equipment • The machine includes monitor, computer and label printer. Lsdpfex Hblhox Anceaa • Its the premium version

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks Ljdpfx Anstvb D Ujcsaa -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

Condition: ready for operation (used), Year of construction: 2016, This 4-axis HOMAG PROFI BMG 512/40/12/V/A was manufactured in 2016, featuring a POWEREDGE gluing unit and a 4-fold edge magazine. It includes an 18-fold disc tool-changer, a 12 kW processing spindle, and a C-axis with unlimited swivel range. The machine supports workpiece lengths up to 4000 mm and thicknesses up to 300 mm. Ideal for advanced woodworking, it offers dynamic space allocation for optimal processing area utilization. Contact us for more information about this machine. Additional information Workpiece • Lengths: 4000 mm for single placement / 2250 mm for pendulum placement • Widths: 1450 mm for all units and front stop • Maximum Workpiece Thickness: 300 mm (including clamping devices) • Up to 60 mm with standard clamps without restrictions for units and extraction. Table • Automatic Console Table • Automatically adjustable console table • 8 consoles Y = 1500 mm • 16 side and stop pins 140 mm, electromechanically controlled • Dynamic space allocation for optimal utilization in pendulum operation • Various double vacuum clamps • Without vacuum pump; supplied via a building-side vacuum system Laedpfsx D Nzvsx Ancoa Tools • 18-fold disc tool-changer Main Drive • Processing Spindle: 12 kW (S6 operation) / 9.5 kW (S1 operation) • Spindle with hybrid bearings • Frequency-controlled rotation: rpm • Automatic feed reduction with decreasing spindle speed Injection Unit • POWEREDGE Gluing Unit • Gluing unit for 360° edge gluing on butt joints • Glue application via application roller onto edge material • 1 pressure roller Ø 50 mm, 1 follow-up roller Ø 35 mm • Max. edge height: 65 mm • Edge thickness: 0.4 - 3 mm (veneer 0.4 - 2 mm / PVC 1.0 - 2 mm) • Hot air nozzle for heating thick edges on small radii, controllable via NC Machine Control • POWERCONTROL PC 86 POWERTOUCH • With 21.5" Full-HD multitouch display • WoodWOP for graphical, dialog-oriented creation of CNC programs • Diagnostic system WOODSCOUT Additional Equipment • Interface for FLEX 5 unit • C-axis with unit interface • Unlimited swivel range • Coupling element for automatic tool change of FLEX 5 unit • Drilling Head • 21 spindles V17 / H4 / S0 / 90° • 17 vertical drilling spindles with quick-change system • T-shaped arrangement: 7 spindles in Y-direction / 11 spindles in X-direction • 4 horizontal spindles with saw 0 / 90° • Pre-cutting Station • Moves with the processing portal (X-axis) • Saw / Trimming Unit for Tool Changer • Combined trimming and corner rounding unit, sensor-controlled • Combined flush-trim / pull-knife unit Extra Information • Coolant tank for processing spindle • Integrated chip conveyor, discharging to the leftNote: The technical data and descriptions are for informational purposes only and are not binding.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Lodpfx Aey Ed Ayenceaa Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc