Radial saw

STROMAB RS 40

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm Lodpfx Aeh Nvyzef Sert -Weight: 962 kg

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed Lsdpfehlp D Nsx Af Sert -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck Lrjdjw U Eg Repfx Af Set * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Lrodpjw Ufplsfx Af Sst Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor Ledpfx Aot Drkyef Sjrt -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values Lrjdpfxsxrauco Af Sjt 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: used, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Horizontal miter angle range: 45°-90°-25° Vertical miter angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Ljdpeiixxnsfx Af Ssrt Dust extraction port: 100mm Machine length: Machine width: Weight: 110 kg

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 Lrodocht Nyspfx Af Sot spare parts dimter in stock equipment in stock accessories in stock

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Lrsdpfjg D Ugksx Af Sot Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Lsdody Hm Depfx Af Sjrt Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand