Elect./Voltage: 575 V, 60 Cy, 3 Ph.
BOUSQUET SDM 100 Air Make UP Unit with Dual Speed Direct fired Make-Up Air Unit rated for maximum 800,000 BTU/HrFeatures & Includes:G90 14G formed frameReinforced fiberglass insulationPull-out doorsSturdy 20G galvanized constructionAluminum/stainless steel burnerAdjustable profile-platesBrand name controls and componentsLow velocity inlet hood with filtersCapacity & Specs: -- Main motor 7.5 HP -- 4,000 / 8,000 CFM -- Propane gas burner -- Cont... more
BAJAJ type 3c-72 / UL / WW
-Paint mist extraction - air conditioning with heater
Maschn.-No. 93/1353, 1993
Article number: KUW_G170062
Supply air unit type 3072 UL/WW
Air flow 3650 / 7300 m3/h
Maximum heating power 83 kW
Hot water 80/60 ° c.
Power 380V / 50 Hz 0,7 / 2.7 kW
Duct connection 360 x 360 mm
Dimensions (LWH) heater
170 x 83 x 73 cm
Extract air unit type 73
Air power 7000/3500/1750 m3/h
Power 380V / 50 Hz 2,5/0,65/0.18 kW
Supply air-exhaust air dryer
-Innenmasse length: ca 5.55 m
Depth: approx. 2.85 m
Height: ca 2,05 m
-for ca. 9 m ³ wood
Wall thickness: 26 cm
was never in operation, is still not quite finished
-Lauber automatic control
Coil with 4 fans 0.85 kW
Heating capacity: ca 28 kw
Cricket also for steaming beech and other species
-can be disassembled into individual walls
Forklifts is on-site
PARKER HIROSS for compressor equipment of compressed air dryers
Refrigerant dryers with cooled after cooler for the removal of steam and cooling the compressed air or gases.
1 piece after cooler type WFN009 DHH16
Air flow normal: 540 m3/h = 9000 litres / min.
Air pressure: up to 16 bar
Barrel length: 1020 mm
Gehöusedurchmesser: Ø 105 mm
Threaded air: G 2 "
Water thread connection: G 3/4 "
Weight of the after cooler: 11 kg
Dimensions of the Aftercooler L x W x H 1030 x 850 x 200 mm
Air supply unit Systemair. Bestend from 1 St heating register 27 KW. 1 fan module and dversen air channels and 1 control unit FA. Siemens. Plant is disassembled and functional. Only pick up
2 will be offered PCs screw compressor
All inspections were made by factory technician.
Delivery quantity effectively 0.68 m3/min
Operating pressure 10 bar
Motor output 5.5 KW
Hours of operation: Compressor 1 20781 h
Compressor 2 14438 h
The Allegro and Largo screw compressors provide high quality compressed air for a variety of industrial applications. This product line with its highly efficient machines is the result of continuous investment in product development
Screw compressor with v-belt drive and control
Motor power: 22kW
Discharge pressure: 10 bar
Quantity: 3, 13 m ³/min
Screw compressor in technically and optically flawless condition
Compressor stage and engine were stored newly.
Hoses and great service new.
Hours of operation: 19016
Last hour: 17016
Year of construction: 2002
Flow rate m3/h: 95.000
Required space mm: 12600 x 2400 x H 6775
Filter hoses: 684
Diameter mm: 120 - H mm 3000
01 Centrifugal Fan HP 60
01 Centrifugal Fan HP 40
01 Centrifugal Fan HP 15
01 Centrifugal Fan HP 15
Transfer Screw conveyor Ø 300
Stairs/Safety railing: Yes
Rotary valve Ø 350 - HP 4
Mechanical shake cleaning system
Electrical Panel: Yes more
For sale 2 air supply devices are manufacturer S & S type NC 40
with each 95.2 KW heating capacity
It's hot water devices 90 / 70 ° C
Air performance Max 7050 m ³/h
Engine power 0.75 kw / 2,2Kw 2 speed
The devices available on a matching steel frame with vibration dampers.
- And drain fittings, and mixer engines are about to see as shown in pictures.
Price refers to each device, there are two!
THERMOTRON SM-8C refrigerator / air Chamber-70 ° C up to + 170 ° C item condition: used
Cabinet / climate Chamber-70 ° C to + 170 ° C humidity 20% to 95%
Mass inside depth 60 cm height 60 cm-width 60 cm of the article comes from a Commons resolution.
All of our used and tested article ran smoothly until the expansion.
Used article, we grant a right of return by two weeks.
For further questions or a an express delivery you please contact with us.
Scope of delivery see ar... more
Hot air generators with Weishaupt oil burners ALKO
The heater were until recently in the exhibition halls Saarbrücken in operation.
Last measurement and maintenance in the year 2016.
Very little operating hours.
Top state because according to specification of the Messegesellschaft the heater were used not more than 2-3 weeks in the year.
Incl. stainless steel chimney about 5 m.
2 x AK 120s
1 x HDS 100
Already disassembled and ready for shipment.
Shipping shipping is po... more
Duplo DSF 2000 Document Sheet Feeder with Bookletmaker and Trimmer
The Duplo Digital System 2000 is a mid-volume booklet maker designed to provide a digital printer with a ready to go means of producing booklets from digitally printed pages. There are options for the type of finish required with optical mark recognition to trigger the bookletmaking sequence. For example, the feeder can take pre-printed litho covers to wrap around variable content inside pages produced on a digital press. Inline... more
with channel components
Year of construction: 2003
Flow rate m3/h: 4,000
Heating power kW: 59,6
Motor power kW: 2,2
Number of suction pipe: 1
Temperature control: Yes
Antifreeze automatic function: Yes
Heating: Water, external heated
Intake manifold: Side
Weight approx. kg: 1,365
DUPLO SYSTEM 4000
One 10 bin tower Suction Collator DC 10/60 System Duplo 5000 with Touchpanell
Stitcher/folder DBM-400 with two Hohner HK 48/5 stitching Haeds
Face trimmer DBM-400 T
long delivery DBM-LS
Can be seen running
In very good condition more
Exhaust system for fine dust
Capacity m3/h: 40.000 (471 m2)
Hight: 2500 mm
Lenkt: 9600 mm
Composition on the top: 2 filter cells with tubes (diameter: 250 mm)
Tubes made of cotton in a very good condition.
Number of cotton tubes: 240, hight: 2500 mm
Composition on the bottom: filling system in bags
Number of bags: 16 Diameter: 440 mm
2 fans with 55 HP
1 Electrical Panel more
Elect./Voltage: 230 V, 60 Cy, 3 Ph.
LAGUNA BANDIT 2/3 TF HOT AIR EDGEBANDER -- 0.4 - 1.5 mm Edge thickness cap. w/automatic cutoff up to 0.8 mm (1/32") only; for pre-glued edgebanding, -- Automatic coil feed magazine, -- Manual single feed for strips, -- Min. panel width 50 mm, panel thickness 10 - 50 mm; -- LEISTER hot air blower (3.0 kW) for reactivating of adhesive, -- Powered belt type holddown over feed thru table, feed speed 20 FPM. -- Front & rear end trim guillotine knive... more
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE
A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding
Specification Saw Unit TR500
Self braking motor 10hp
Saw blade diameter 500mm
Max cutting width (refer to chart)360mm
Max cutting height (refer ... more
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph.
AIRFLOW SYSTEMS DC-12 CARTRIDGE Dust Collector. Two Units are being sold together. -- Specifications: 8,000 CFM capacity approx. for both Filters Cartridge System complete with (12) cylindrical cartridges for each unit (approx. 133 sq. ft. cloth area per cartridge), for total approx. 3,192 [...] of filter area for both unts; operating at 2.5:1 air-to-cloth ratio. -- Comes with: Automatic continuous Vibra-Pulse jet cleaning via compressed ai... more
grinding length:600 mm
grinding width:275 mm
workpiece height:375 mm
max. table load:300 kg
dimensions of grinding wheel:300x50x76,2 mm
spindle drive:3-10,5 kW (100% ED)
Clamping area:900x300 mm
total power requirement:ca. 18 kW
weight of the machine ca.:3300 kg
Used / overhauled surface grinding machine, Make ELB, type Super Rubin 024 with 6-axis CNC Unicon. Machine no. 215160790 Machine bed made of micro-Granitan. Machine with precision-balanced through toothed belt. Infinitely var... more
a used well-preserved steelworker comes always with Stanzetisch Hydraulic with die holder Vierkantausklinker angle steel knife in the steelworker Gehrungsanschalg for miter bar Shear flat steel scissors hydraulic material clamping in the profile and flat bar shear viewfinder for punch foot pedal Special punching device SV90 Punching capacity 60 Tonnes techn. Data see PDF document
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.