Used Much Hand Saw for sale (13,950)

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Tjdpfxjzpb Eqj Amyoa

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Tjdpszpbrqsfx Amyoa Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: used, mileage: 27,000 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 05/2015, emission class: euro5, color: white, number of seats: 9, Year of construction: 2015, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Volkswagen Crafter Kombi MAXI with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! Todpfx Amezqx Hbjyja * German vehicle * Euro 5 standard * First owner * Fully documented service history * M1 passenger car registration * VAT can be shown Equipment: * Panel van MAXI * Kombi version * 9 seats * Automatic climate control * Auxiliary heater including remote control * Tow hitch * Passenger airbag * Electric step * 12-volt socket in the cargo area * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2580 KG * Payload: 920 KG * Trailer load: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer registration (5-day/customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * If necessary, paint correction and Smart Repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters and other expenses that you don't need to worry about. Optionally, we can have the vehicle inspected by an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are fully available to you around the clock. If you have any questions, comments or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special equipment: Storage compartments: DIN compartment in front under the headliner and luggage net on the rear tailgate, Storage compartments: DIN compartment in front under the headliner, Storage compartments: Luggage net on the rear tailgate, Airbag driver/passenger side, Airbag driver side, Connection terminal, Audio system RSD 2000 (speakers in front), Mobile phone interface Bluetooth, Exterior mirror electrically adjustable and heated, Rear indicator lights (roof), Speed limiter, Isofix mounts for child seat on the rear seat, Outside temperature display, Rear headrests height/tilt adjustable, Spare wheel in driving condition, On-board tools and jack, Tire repair kit, Hinges for rear doors with enlarged opening angle, Mud flaps front, Seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, Step at the rear right, Front axle reinforced Additional equipment: Storage compartments: Luggage net on the rear tailgate, Storage compartments: Tray/compartment flat, above the windshield, Airbag driver side, Anti-slip regulation (ASR), Exhaust tailpipe straight to the rear, Floor covering in the cargo/passenger compartment rubber, Headliner, Suspension: Shock absorbers rear reinforced, Suspension: Comfort suspension rear, Window in the cargo/passenger compartment: - fixed, rear left, Window in the cargo/passenger compartment: - fixed, rear right, Window in the cargo/passenger compartment: - fixed, center left, Window in the cargo/passenger compartment: - fixed, center right, Window in the cargo/passenger compartment: - fixed, front left, Window in the cargo/passenger compartment: - fixed, front right, Noise damping

Condition: used, maximum load weight: 14,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 06/2027, loading space length: 6,900 mm, loading space width: 2,500 mm, loading space height: 980 mm, Equipment: ABS, * ABS * BPW ECO-Plus axles * Disc brakes * Duomatik air connection ----Body: Construction material tipper body, steel front panel, aluminum side panels left/right/rear, hardwood floor, lashing eyes, folding center support, Kinnegrip closures. Sales only to commercial businesses. FOR EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE. INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, proforma invoices, orders, and sales discussions. Tsdozqx Dmjpfx Amyea

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 1600 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Cutting area: approximately 5300 mm in length 1600 mm in height (model 6216) Control: fully electronic positioning and touchscreen operation for serial cuts. Tjdpfx Ajzpbcvomyea Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Location: will arrive in week 33 at warehouse 54634 Bitburg.

Condition: used, mileage: 47,441 km, power: 239 kW (324.95 HP), first registration: 02/2022, fuel type: electric, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle on behalf of a customer. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. Tedpfxszqxlws Amyoa Additional features: 15 speakers, airbag on driver/passenger side, exterior mirrors foldable, exterior mirrors electrically heated and foldable, electric motor 239 kW, fixed glass roof, rear lights LED, heating/air conditioning: heat pump (Supermanifold), HV battery 60 kWh, inductive charging cradle for smartphone, interior: premium black, body: 4-door, knee airbag on driver/passenger side, head airbag system (window bag) front + rear, heated steering wheel, light alloy wheels, model year 2021, multimedia interface 2 x USB (Type C) front and 2 x USB charging port (Type C) center console rear, parking brake electronic (EPB), rear seat back split/foldable (60:40), front seats electrically adjustable (12-way), seat heating front, special paint pearl white, premium sound system, voice control system, subwoofer, Wi-Fi on board This is a private sale, not a rental vehicle! The vehicle is located in our external storage facility; therefore, please contact us to arrange a viewing. Thank you! Subject to price changes, typographical errors, and errors.

Condition: used, functionality: fully functional, load capacity: 2,500 kg, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: None Tjdjzqxcvspfx Amyea Technical condition: New Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual travel and lift, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: used, mileage: 547,850 km, power: 375 kW (509.86 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.510 ACC 2X TANK RETARDER ----VEHICLE HISTORY 1ST OWNER GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----VEHICLE DATA Manufacturer: MAN Truck & Bus * Model: TGX * Vehicle Type: Semi-trailer tractor * Vehicle Class: N3 * Fuel: Diesel * Initial Registration: 10/18/2019 * Engine Power: 375 kW (510 hp) * Engine Displacement: 12,419 cm³ * Emission Class: Euro VI * Permissible Total Weight: 18,000 kg * Technically Permissible Total Weight: 20,500 kg * Unladen Weight: 8,088 kg * Permissible Saddle Load: 20,000 kg * Permissible Total Train Weight: 44,000 kg (combined transport) / 40,000 kg standard * Wheelbase: approx. 3.60 m AXLE DATA Axle 1* Tire Size: 385/55 R22.5 * Leaf Spring Suspension Axle 2* Tire Size: 315/70 R22.5 * Twin Tires * Air Suspension * 4x Air Bellows FUEL TANK 2x Fuel Tank * 1x 580 liters * 1x 580 liters DRIVE & SAFETY Automatic Transmission * Retarder * Differential Lock * Hill Start Assist * Lane Keeping Assistant * ACC (Adaptive Cruise Control) COMFORT & EQUIPMENT Electric Windows * Heated Exterior Mirrors * Multifunction Steering Wheel * Leather Steering Wheel * Auxiliary Heater * Auxiliary Air Conditioning * 2x Bunk * Navigation System * Multimedia System Tedpfszqxc Nsx Amyja * Refrigerator * Seat Heating TIRES Front Axle: 385/55 R22.5 * Rear Axle: 315/70 R22.5 MOT / INSPECTION Main Inspection performed on: 01/03/2026 * Next Main Inspection: January 2027 * Next Safety Inspection (SI): July 2026 * Safety Inspection performed on: 05/22/2025 * Next SI according to Safety Inspection: May 2026 DEFECTS / NOTES Stone chips in the field of vision OTHER TECHNICAL DATA Maximum Permissible Axle Load Front Axle: 7,500 kg * Maximum Permissible Axle Load Rear Axle: 11,500 kg * Maximum Speed: 95 km/h * Noise Level: 79 dB(A) ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least 500.00 ¤ / 1,000.00 ¤ will be charged. Changes, errors and prior sale reserved! You can find more vehicles on our homepage: Sale is exclusively according to our general terms and conditions - see homepage Important Note - Important Information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: None Technical condition: New Todpfxeyfyymj Amyja Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual travel and lift, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: good (used), Year of construction: 2002, functionality: fully functional, Feature | Technical Data Machine Type | Fully automatic CNC pipe circular saw Cutting Type | Straight cut (90°) Pipe Diameter | Ø 8–80 mm (partially specified as 10–80 mm) Todpfxezqdlce Amysa Square Profiles | 10 × 10 to 70 × 70 mm Rectangular Profiles | Up to 80 × 70 mm Maximum Bar Length | 6,500 mm Minimum Bar Length | 2,000 mm Maximum Cutting Length | 4,500 mm Minimum Cutting Length | 50 m

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Tjdpjzn N Ikjfx Amyea

Condition: used, functionality: fully functional, AGME hand-operated bench presses Tjdpfx Amoywyiyoysa

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Tjdpfx Amozqu Egeyja Saw blades 500mm etc.

Year of construction: 2011, operating hours: 6,342 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3729, Support track width 3600 mm Support height adjustment 400 mm Cut-off wheel, max. 725 mm (max. cutting depth 255 mm) Tjdpfx Amezqu A Ssysa Motorized support swivel, 0-90° stepless Main motor speed regulation 900-4300 rpm Camera Extension of bridge travel rails Steel tilting table with hydraulic tilting function, 3500 x 2000 mm Horizontal blade flange (500 mm) Laser Software: GMM CAD / MiniCad / Profile Automation

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW Tsdpfxjxtabxo Amysa – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: excellent (used), HOLTEC HFT 21 packet cutting saw with automatic feed – year of production 1986 Todpfxoiwfm Us Amysa – German production – electric roll feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roller diameter 160 mm - height of the rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, cutting length (max.): 3,000 mm, cutting height with scoring (max.): 40 mm, cutting width at rip fence: 1,250 mm, trimming length: 3,000 mm, Equipment: saw blade guard, - Austrian-made - With scorer TECHNICAL SPECIFICATIONS: - Table carriage length: 3000 mm - Max. main blade diameter (without scorer): 315 mm - Max. main blade diameter (with scorer): 250 mm - Blade bore diameter: 30 mm - Max. cutting height with 250 mm blade: 40 mm - Spindle lock - Main blade adjustable up/down and at an angle - Blade guard - With carriage - Cutting width at the fence: 1250 mm - Main motor: 4 kW - Fence with latch: 1700 / 2600 mm - Scorer - Max. scorer blade diameter: 80 mm - Scorer spindle diameter: 20 mm Todpexm Rm Sjfx Amyja - Scorer motor: 0.65 kW - Extraction port diameter: 100 mm - Shipping dimensions (L/W/H): 325 / 190 / 130 cm - Weight: 500 kg

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width Tjdpjd Dc E Asfx Amyja - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: good (used), Year of construction: 1993, COSMEC SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: Tjdpjgyz Rvsfx Amyea cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg

Year of construction: 2005, condition: used, functionality: fully functional, – Polish production – DTR – Used machine, very good condition TECHNICAL PARAMETERS: – max. processed log diameter: 320 mm – minimum processed log length: 1600 mm – number of spindles: 2 pcs – spindle diameter: 70 mm – spindle working length: 230 mm – saw blade diameter: 450 mm – main motor power: 75 kW – feed motor power: 2 x 2.2 kW – upper feed rollers motor power: 1.1 kW – side discharge feed rollers motor power: 2 x 1.1 kW – 2 geared feed rollers Tjdpfx Amowu U Ifsyja – infeed table length: 2100 mm – outfeed table length: 2600 mm – machine dimensions (L/W/H): 600 x 200 x 185 cm – weight: ~3800 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture Todjw H R R Hepfx Amyea TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails Tsdpsg Db U Aofx Amysa table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: used, Discharge take-off table: - total length 7850 mm - total width 1200 mm - four upper hold-downs - prism guide 70 mm - hydraulic feed Todpoxuiq Ejfx Amyja

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Tsdpfx Amsqup Aneyea Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Tedpfx Amoq Ii Dloyea Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.