Used Much Hand Saw for sale (15,360)

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Dodpexw Ii Ssfx Ac Nokh Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual Dsdpextvcxofx Ac Nskh CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: good (used), Year of construction: 1975, functionality: fully functional, feed length X-axis: 5,300 mm, feed length Y-axis: 6,220 mm, feed length Z-axis: 80 mm, Type: Standard 6220 S, Machine no.: 5166, Year of manufacture: 1975. Cutting capacity: 5300x220x80 mm. Power supply: 3/380V/50Hz. Motor: 4.4 kW (6 HP), 2880 rpm. Dkjdpfxjx Rq Ndo Ac Noh

Year of construction: 2016, condition: used, functionality: fully functional, - Carrier size: 1000 mm - Infeed roller conveyor: 16 m Dodpfjyh Apasx Ac Njkh - Outfeed roller conveyor: 14 m - Extension option available

Condition: used, mileage: 240,000 km, power: 92 kW (125.09 HP), first registration: 04/2011, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 7, total length: 64,988 mm, total width: 2,100 mm, loading space length: 3,200 mm, loading space width: 2,050 mm, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales consultant. Attention!!! Sale preferably to businesses/trade customers Internal ID number: [2921] ----Optional services available: * 12-64 month warranty (valid EU-wide) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available with or without down payment ----Vehicle highlights: * 19% VAT deductible * 1st owner * German vehicle * Regularly serviced * Euro 5 standard * Maxi flatbed: 3,200 mm length / 2,050 mm width * 7 seats * Towbar 2,500 kg Special equipment: Passenger airbag, onboard computer, full wheel covers, spare wheel in roadworthy condition, mud flaps front and rear, driver’s cab seats: lumbar support for driver's seat Dkedexri N Aepfx Ac Nsh Further equipment: overhead storage, driver airbag, electrically adjustable & heated exterior mirrors, tachometer, electronic brake force distribution, interior filter: pollen filter, body structure: standard double cab flatbed, fuel tank: 80 L, height-adjustable steering column (steering wheel), engine 2.3L - 92 kW dCi Diesel CAT, wheelbase 4,332 mm, smoker’s package, low emissions according to Euro 5, gear shift indicator, seat upholstery: fabric, seats in driver’s cab: 2nd row four-seater bench, multifunctional passenger double seat, height-adjustable driver's seat, heat-insulating glazing ----Interested in leasing or financing? We offer attractive options - financing possible even without down payment! Feel free to contact us. Contact details: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon–Fri: 09:00 – 18:00 Sat: 09:00 – 14:00 ----Note: All information provided online is non-binding and intended solely for general vehicle description. Errors, typographical mistakes, and prior sale excepted. The definitive condition of the vehicle is determined exclusively in the purchase agreement at the premises or through written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 110,000 km, power: 92 kW (125.09 HP), first registration: 07/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,823 mm, total width: 1,999 mm, total height: 2,394 mm, loading space length: 3,200 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now on WhatsApp: Contact our sales advisor quickly & easily. Attention! Preferential sales to business customers. Internal ID number: [2907] ----Optional services available: * 12–64 months warranty (valid throughout the EU) * New maintenance service * New general inspection (TÜV) & emissions test (AU) * Nationwide delivery * Financing possible with or without down payment ----Vehicle highlights: * 19% VAT deductible * 1st owner * German vehicle * Euro 5 standard * Regularly serviced * High-roof, extra-long * Air conditioning * Cruise control * Tow bar (2,800 kg) * Rearview camera * Special equipment: Audio system 6000 (radio/CD player), double locking system, rear wing doors with windows, full-height partition wall behind driver and passenger with window (recess for driver seat back), second remote folding key Further features: Passenger airbag, driver airbag, indicator integrated in exterior mirrors, tachometer, electronic differential lock (EDS), hill start assist, rear wing doors (180° opening angle), recirculation heater, body version: medium high roof, headlight range adjustment, Engine 2.2 L – 92 kW TDCi CAT, production location: Otosan, wheelbase 3750 mm, full wheel covers, low emissions according to Stage 5 / Euro 5, sliding door load/passenger compartment right, mud flaps front and rear, side protection mouldings, Visibility Package 1, Seat Package 22: driver's seat (3-way adjustable) – passenger double seat, partially painted bumpers, Trend, tinted windows, compartment panelling: hardboard ----Interested in leasing or financing? We offer attractive deals – possible without down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm Dodpfx Asxl N Aijc Njkh ----Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, misprints, and prior sale excepted. The definitive features of the vehicle are determined solely by the purchase contract on-site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: used, mileage: 125,000 km, power: 80 kW (108.77 HP), first registration: 03/2010, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales consultant Internal ID number: [2714] ----Optional add-ons: * 12–64 months warranty (valid EU-wide) * New inspection * New MOT & emissions test * Nationwide delivery * Financing available with or without down payment ----Vehicle highlights: * 1 owner * Regularly serviced * Long wheelbase * Special equipment: Storage nets on rear wing door, audio system RCD 2001, wooden flooring in cargo area, rear wing doors with windows, rear window wiper, partition wall with window in cargo area, acoustic reverse warning system (external warning signal), seats in cab: double passenger seat, securing rails in cargo hold – on side walls and roof frame Further equipment: Storage tray/compartment above windscreen, driver’s airbag, traction control (ASR), grab handle on right rear pillar, driver assistance system: brake assist (HBA), bodywork: panel van, body type: standard roof, fuel tank: 75 liters, engine 2.5-L – 80 kW TDI DPF, parking lights circuit, wheelbase 3665 mm, tire repair kit, low emission according to Euro 5 standard, sliding door cargo/passenger compartment right, seat upholstery: fabric, driver’s seat height adjustable, permissible total weight 3.00 t, additional brake light ----Interested in leasing or financing? We offer attractive deals – also possible without down payment! Feel free to contact us. Contact: Phone: Email: Dkodpfxoygqkxj Ac Neh Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All details on the internet are non-binding and serve only as general vehicle descriptions. Errors, typographical mistakes, and interim sale reserved. The binding condition of the vehicle is determined solely by the purchase contract made on site or by written agreement. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 219,000 km, power: 96 kW (130.52 HP), first registration: 10/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,678 mm, total width: 2,100 mm, total height: 2,360 mm, loading space length: 3,300 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat via WhatsApp now: Quick & straightforward contact with our sales consultant. Attention! Preferential sale to commercial customers. Internal ID number: [2922] ----Optional add-ons: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV (roadworthiness test) & emissions certificate (AU) * Nationwide delivery * Financing possible even without down payment ----Vehicle Highlights: * 19% VAT deductible * 1 previous owner * German vehicle * Regularly serviced * Euro 6 emissions standard * Maxi long wheelbase * Platform length = 3,300 mm * 7 seats * Towbar (trailer hitch) = 3,000 kg * Special equipment: Air conditioning, towbar, electrically adjustable and heated exterior mirrors, roof storage/roof gallery front, reinforced rear suspension, reinforced alternator Additional equipment: Driver's airbag, exterior mirrors with wide-angle section, integrated indicators in exterior mirrors, body/type: platform double cab standard, fuel tank: 90 L, height-adjustable steering column (steering wheel), engine 2.0 L – 96 kW Blue-HDI FAP KAT, wheelbase 4,035 mm, spare wheel with same specification as regular tires, low emission according to Euro 6, SCR system (AdBlue technology), side protective strips, seat cover/upholstery: fabric, cab seats: double passenger seat, cab seats: driver’s seat with lumbar support, permissible gross weight 3.5 t ----Interested in leasing or financing? We offer attractive terms – financing also possible without down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Dkjdpsxl N Apjfx Ac Nsh Business hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and serves only for general vehicle description. Subject to errors, typographical mistakes, and prior sale. The definitive specification of the vehicle is determined exclusively by the local purchase contract or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to commercial clients.

Condition: used, mileage: 239,000 km, power: 120 kW (163.15 HP), first registration: 04/2016, fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,998 mm, loading space length: 3,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Contact our sales advisor quickly and easily. Attention!!! Preferential sale to commercial customers. Internal ID Number: [2760] ----Optional add-ons: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & Emissions Test * Nationwide delivery * Financing possible without down payment ----Vehicle highlights: * 19% VAT deductible * 1st owner * German vehicle * Regularly serviced * Euro 5 emission standard * Shelving system in the cargo area * Tow bar (2,700 kg) * Long wheelbase * Automatic climate control * Special equipment: 13-pin trailer socket, Audio System Audio 10 (radio with CD player), outside temperature display, roof rack mounting rails, digital tachograph, downloadable, 180 A alternator, wooden floor in cargo compartment, crossbar with integrated step, spare wheel with full road tires, spare wheel holder under rear frame including jack, dual passenger seat in driver’s cab, front stabilizer, plastic lining in cargo / chassis area, absorbent glass mat battery 95 Ah Further equipment: 3rd brake light, adaptive brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), mirrors with integrated indicators, brake assist, ABS + ASR, headliner in the cab, lockable glove compartment, rear door (180-degree opening angle), bodywork: standard van, child locks, main fuel tank: 75 l, full partition wall, load/tie-down anchors, headlight range adjustment, model update, engine 2.1L – 120 kW CDI CAT, wheelbase 3,665 mm, smoker package, low-emission according to Euro 5, sliding door right in cargo/passenger area, driver's seatbelt warning system, seat covering/upholstery: Lima fabric, service interval indicator (Assyst), heat-insulating glazing, permissible total weight 3.00 t ----Leasing or financing options? We offer attractive deals—including options with zero down payment! Please contact us. Contact: Dodexiux Repfx Ac Njkh Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Notice: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typing mistakes, and prior sale excepted. The binding condition of the vehicle is determined only via the purchase contract on site or through written confirmation. Vehicles with more than 50,000 km mileage or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 47,000 km, power: 96 kW (130.52 HP), first registration: 09/2016, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, Year of construction: 2016, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Ford Transit L2H2 from first owner for sale Net sale price: €12,390.- First registration: 09/2016 Dksdpfjwbm S Njx Ac Nsh Mileage: 47,000 km Inspection (TÜV) valid until: 08/2027 Last service at 45,000 km Further equipment details below! Opening hours and more information: Viewing/purchase without appointment possible: MON - THU: 9:00 to 16:00 FRI: 9:00 - 13:00 SAT: 9:00 - 12:00 Address: Tabakried 11, 84076 Pfeffenhausen Please no emails / no emails can be processed due to time constraints, thank you for your understanding!----For inquiries: Christian Hirsch Please try calling multiple times as we are often talking to customers. If you have any questions, Master Automotive Technician Christian Hirsch or our friendly staff will be happy to assist you. Special equipment: - Second battery - Passenger airbag - Fixed window in right sliding door - 240 A alternator - Rear wing doors with glazing (opening angle 180 degrees) - Rear window wiper - LED cargo area light - Partition wall behind driver/passenger with window - Tire repair kit - Seat package 9 / 15: Driver’s seat (4-way adjustable) – double passenger seat incl. seat heating, fabric upholstery Additional equipment: - Third brake light - Overhead storage in cab - Driver airbag - Traction control (ASR) - Audio system: radio/CD player with multifunction display - Electrically adjustable & heated exterior mirrors - Integrated turn indicator in exterior mirror - Flooring: vinyl in load/passenger area - On-board computer - Roof lining in passenger compartment - Tachometer - Electronic brakeforce distribution (EBD) - Electronic differential lock (EDS) - Driver assistance system: hill start assist - Grab handle on B-pillar - Heater with recirculation control - Interior pollen filter - Body type: high-roof panel van - Body variant: medium-high roof - Silver radiator grille - Height and reach adjustable steering column - Headlamp leveling - LCV registration - 2.0 L – 96 kW TDCi CAT engine - Front and rear parking sensors - Assembly plant: Otosan - Wheelbase: 3300 mm - Full wheel covers - Euro 6 emissions standard - Right sliding door (load/passenger compartment) - Wide side protection strips (side cladding) - Seats in load/passenger compartment: 1st row, 3-seater bench - 6.5x16 steel wheels - Partially painted bumpers - Trend version - Integrated rear entry step - Tinted windows - Half-height side trim in load/passenger compartment - Second key with remote control MON - THU: 9:00 to 16:00 FRI: 9:00 - 13:00 SAT: 9:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen - For inquiries: Master Automotive Technician: Christian Hirsch The information provided online is non-binding and serves as a general description. It does not represent guaranteed features. The seller is not liable for typing or data transmission errors / changes / input errors. Subject to error and prior sale.

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. Dksdpfx Acsxp Hzds Nsh The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment.

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Dksdpfjygm Tiox Ac Neh

Condition: excellent (used), Year of construction: 2001, Mayer FH2-3520 Veneer Saw, precision cutting saw with jointing unit (planing unit) and veneer alignment table Robust machine construction by Mayer A video of the machine in operation can be sent on request. For tear-free, perfectly joined cutting of veneer, including thick-cut veneer Maximum cutting length: 3500 mm Saw and jointing units are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear outfeed table with through-finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8 kW, jointing unit (milling unit) motor 1.2 kW Motors can be conveniently switched on at the handle and operate only when needed. Fine-cut blade with carbide tips, sharpened Planer head Z4, equipped with new carbide indexable inserts, including spare knives Practical front veneer shelf, extendable for the planing unit Extraction port 100 mm with extraction duct CE marking Dkjdpsx Hqtzjfx Ac Nsh Operating manual Standard tool kit Original paint, only minor touch-ups Dimensions approx. 5050 x 1700 x 1400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see ‘more offers from this seller.’

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg Dkedpfeygm Akex Ac Njh - Pneumatic clamping system

Condition: good (used), Segura 117 metal band saw - Tilting table - With Ideal bandsaw blade welding device - Very heavy-duty design - Speed control Dksdpfx Acoygmzte Noh

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Dodpfx Acoukgiqj Nskh Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1998, still well-preserved panel saw max. cutting length 3200 mm Dkjdpfx Acex Sdrhe Neh Price ex location, not dismantled, Austria, Linz area

Condition: like new (used), Used automatic hydraulic bandsaw IMET BS 350 AFI-E +ESC Blade dimensions: 3370x27x0.9 mm Cutting capacity at 0°: round 305 mm, square 250x250 mm, rectangular 350x200 mm Dkjdpfx Acevguyys Neh Cutting angle: from -45° to +60° Blade speed: two speeds Vertical vise

Condition: like new (used), Year of construction: 2022, Used AC 400 Circular Saw for Aluminium Year of manufacture: 2022. The saw has seen very little use and is in excellent condition. Includes 2m roller table. Miter cutting up to 45° to the right and left Detent positions at 15° – 22.5° – 30° – 45° – 67.5° Motor power: 1.5kW Voltage: 400V Adjustable feed rate for various profile types Dsdpfx Ajyhzq Njc Nekh Blade speed: 3000 rpm Blade size: 400x32x4mm Easy blade replacement Double pneumatic vertical clamps Two horizontal clamps Saw hood with safety switch Two-hand safety operation Machine weight: 132kg Machine dimensions (LxWxH in mm): 720x760x1330 Spray cooling system Supplied with air blow gun Hydro-pneumatic blade feed with speed adjustment User manual in Slovene and CE declaration included Manufacturer: Tubend - Tugra makina metal (Turkey)

Condition: new, Year of construction: 2025, ARE YOU INVOLVED IN CUTTING THICK LOGS AND ARE YOU LOOKING FOR A POWERFUL BAND SAW THAT WILL CUT YOUR THICK LOG WITHOUT PROBLEMS? THEN WE HAVE A SOLUTION FOR YOU, THE HORIZONTAL BAND SAW WRC 1550! ✔️ROBUST CONSTRUCTION THAT ENABLES SAW STABILITY ✔️MAIN MOTOR 55-110kW ✔️IDEAL RATIO BETWEEN THE DIAMETER OF THE MAIN WHEELS, THE WIDTH OF THE MAIN WHEELS, THE LENGTH, WIDTH AND THICKNESS OF THE BAND SHEET, WHICH ENABLES ACCURATE, FAST CUTTING Dkedpov R Umuefx Ac Njh ✔️DOUBLE-SIDED BEARING WHEELS THAT ENABLE STABILITY OF THE MACHINE EVEN IN THE LONG TERM! ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW HEAD ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW LINE (INCLUDING HYDRAULIC DOUBLE TURNERS DESIGNED SPECIFICALLY FOR TURNING THICK HEAVY LOGS) 👉 For more information and inquiries, contact us!

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Dkjdpfx Acexvh E Ro Neh Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1973, machine/vehicle number: 959, Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 VBaujahr / Year 1973 - Serial-No. 959 Dkedpfsrmul Sjx Ac Nsh Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 13557, Year of construction: 2005, Manueller Handstapler / Manual Hand Stacker Carl Stahl FL 600Baujahr / Year 2000 - Serial-No. 13557 Tragkraft / Capacity max. 600 kg Dkodjiw Em Dspfx Ac Noh Eigengewicht / own weight 210kg Hubhöhe / Lift high max. 1600mm Gabel Länge / forks length 1.150 mm Lastschwerpunkt / Load Center 600 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2003, machine/vehicle number: 20520, Trennsäge - Splitting Saw Metris MT 817Year 2003 - Serial-No. 020520P Dodpeh Axn Dsfx Ac Nekh Complete clean and Check Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1992, functionality: fully functional, saw blade diameter: 350 mm, Crosscut and mitre circular saw Graule ZS135, year 1992 -Motor power: 2 kW -Speed: 3800 rpm -Saw blade: Ø 350 mm, tiltable -Cutting capacity at 90° flat: 430 x 135 mm -Cutting capacity at 45° flat: 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm Dkjdpfx Aoyhzlaec Noh -Weight: approx. 100 kg