Used Metal Rolladen Maschine for sale (35,985)

Condition: used, Year of construction: 2015, control SIEMENS - 840 D - - - - - - - - - - - - - - - - - - 5-axis simultaneous machining center | SPINNER - U 620 equipped with ITC, NC swivel rotary table, tool changer & chip conveyor. The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U620| U-620 Ksdpfx Aoz Dxrzshgjnb

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min Knsdpoz Ag Ansfx Ahgsb EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm Knsdpfxsygx Hne Ahgjb - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Kjdszmzhmepfx Ahgonb Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, total length: 2,600 mm, table width: 260 mm, table length: 800 mm, type of input current: three-phase, overall weight: 2,600 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, # CNC Machining Center 532 Metal Technics Polska MTP CNC 532 ## SPECIAL OFFER - 5% DISCOUNT Original price: €17,936 net EXW Discount: €896.80 SPECIAL PRICE: €17,039 NET EXW Year: 2026 Condition: New, fully functional Location: Sokołów Podlaski, Poland ## Description The MTP CNC 532 is a compact and precise vertical CNC machining center designed for milling, drilling and tapping of steel, aluminium, non-ferrous metals and engineering plastics. The machine features professional SIEMENS SINUMERIK 808 Advanced control, SIEMENS servo drives, precision linear guideways and ball screws. Its rigid construction provides excellent stability, accuracy and repeatability, making it suitable for CNC workshops, tool rooms, prototype production and small-to-medium series manufacturing. A fully enclosed working area protects the operator from chips and coolant, while the automatic lubrication system reduces maintenance requirements. ## Technical Specifications * Table: 800 x 260 mm * Spindle taper: BT30 (BT40 optional) * X/Y/Z travel: 500 / 320 / 420 mm * Spindle-to-table distance: 90-470 mm * Maximum spindle speed: 8000 rpm * Tool magazine: 10 positions * Rapid traverse X/Y/Z: 10 / 10 / 8 m/min * Working feed: 2.6-2500 mm/min * Servo torque X/Y/Z: 6 / 6 / 7.7 Nm * Positioning accuracy: +/- 0.02 mm * Repeatability: +/- 0.01 mm * Main motor: 3.7 kW * CNC control: SIEMENS SINUMERIK 808 Advanced * Servo drives: SIEMENS * Power supply: 400 V, three-phase * Dimensions: 2100 x 1800 x 2200 mm * Weight: 2100 kg ## Standard Equipment * SIEMENS SINUMERIK 808 Advanced CNC * SIEMENS servo drives * 8000 rpm spindle * 10-position automatic tool magazine * Fully enclosed working chamber * Precision linear guideways and ball screws * Automatic lubrication system * Pneumatic system * LED working-area lighting * 3-color status/alarm lamp * CE Declaration of Conformity * Technical and operating documentation ## Applications Ksdpfsy Ht Axsx Ahgjnb Ideal for precision milling, drilling and tapping, prototype production, tool rooms, CNC workshops and serial manufacturing. ## Transport, Warranty & Service Professional transport is available throughout Europe, with costs calculated individually according to destination. Free collection from our warehouse in Sokołów Podlaski is also available. The machine is supplied with a 12-month warranty, warranty service and spare-parts support. Post-warranty servicing and spare parts are also available. ## SPECIAL PRICE Original price: €17,936 net EXW 5% discount: -€896.80 SPECIAL PRICE: €17,039 NET EXW VAT applies where legally required. Metal Technics Polska Fabryczna 1, 08-300 Sokołów Podlaski, Poland Contact us for availability, transport quotation, additional photos, videos or an individual commercial offer.

Condition: good (used), input voltage: 380 V, type of input current: three-phase, pressing force: 50 t, stroke length: 100 mm, Used hydraulic press brake Brand: Ajial Colly Model: 502 H-5 Bending length: 2100mm Pressing force: 50 tons Ksdpfxsz Dulde Ahgjnb Stroke: 100mm Motor: 5.5Hp (Three-phase 380V) Up and down movement controlled by foot pedal. Includes: - Ajial 85º punch set, 2000mm - Multi-V die, 54x54mm, 2000mm + 1 additional section for testing, with some defective V-shapes (See die on the floor)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 800 kg, We are offering this very well-maintained Balzer 800 aluminum melting furnace, manufactured in 2008. Manufacturer: Balzer Model: Balzer 800 Knsdoz Dpy Nepfx Ahgeb Year of manufacture: 2008 Condition: very good Category ID: 235 Type ID: 1729 Machine type: Aluminum melting furnace If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Mössner Rekord SSF/500 vertical band saw, metal band saw Roll diameter: 500 mm Overhang: approx. 485 mm Cutting height: approx. 350 mm Table: 700 mm x 600 mm Cutting speed: approx. 15-940 m/min Welding machine: Ideal Space requirement: 1150 mm x 850 mm x 2080 mm (W x D x H) Kedpfx Ajz Df H Eehgjnb You are welcome to visit us for an inspection. We can also arrange a cost-effective transport service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from the technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Knedpfoz Dbtzjx Ahgjb Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Kjdpez Apdhofx Ahgjnb Travel range, Z-axis: 500 mm MACHINE DETAILS Control system manufacturer: Siemens

Condition: good (used), input voltage: 380 V, type of input current: three-phase, pressing force: 65 t, stroke length: 100 mm, Used hydraulic press brake Brand: Ajial Model: 3100x65tn Bending length: 3100mm Pressing force: 65 tons Stroke: 100mm Motor: 5.5Hp (Three-phase 380V) Up and down movement controlled by a two-foot pedal + emergency stop. Includes: - Ajial 85º punch set, 3000mm Ksdpfx Ahoz Du Dgjgjnb - Multi-V die, 54x54mm, 3000mm.

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm MACH-ID 9710 Make: GRESSEL Kodpfoz Arigex Ahgjnb Type: Duogrip 125mm Year: 2012 Length:490mm Width:125mm Height:120mm Weight:55kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 54,484 h, machine/vehicle number: 048, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 16,175 h, laser power: 3,500 W, table length: 3,000 mm, type of cooling: water, overall weight: 8,300 kg, total width: 1,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, To sell used Amada laser cutting machine in continious operation. Located in Poland, Bykow. LCG 3015 LST Laser cutting: 16175 h Kjdpoz Di E Sefx Ahgjnb Machine operating: 30437 h Machine on: 55747 Machine in operation, maintenence records availible. Availible now.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,160 mm Travel range, Y-axis: 610 mm Knedpfxozzx Hio Ahgob Travel range, Z-axis: 610 mm Table length: 1,320 mm Table width: 610 mm Accuracy: ±0.01 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Spindle speed: max. 12,000 RPM MACHINE DETAILS Control system model: Siemens Sinumerik 840D Input voltage: 400 V Weight: 7,000 kg EQUIPMENT Chip conveyor Documentation Oil mist separator Note: The machine has undergone regular electronic and mechanical maintenance. New ball screws were installed approximately 1 year ago.

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Equipment: documentation/manual, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. Knjdpfezg A Sajx Ahgob 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Equipment: crane, Complete aluminium foundry for sale – machines, equipment, and supplies Due to the cessation of our business operations, we are offering our complete aluminium foundry for sale, including machines, equipment, and various supplies. This is an interesting opportunity for an existing foundry that wishes to expand its capacity, but also for an entrepreneur who wants to acquire a complete setup for aluminium casting in one go. The foundry is equipped for the production of aluminium castings and has the machines, equipment, and tools required for the complete casting process. The complete setup includes, among other things: Melting and casting equipment Equipment and supplies for sand casting Mould boxes and various casting tools Equipment for preparing and processing moulding sand Workbenches and other production equipment Various hand tools and supplies Kjdez A Agtjpfx Ahgonb Stock of casting and consumable materials Various accessories specifically for aluminium casting Other machines and supplies from the foundry The foundry has been used professionally within our own production for many years. Due to the cessation of our business operations, the complete setup is now available. We prefer to sell the foundry as a complete unit. This makes it possible to take over an existing production facility with all its associated supplies in one go. The equipment and inventory can be viewed by appointment. If you are seriously interested, we can, of course, provide a complete overview of the machines, equipment, tools, and other supplies available. Price: upon request Are you interested in the complete foundry or would you like more information about the equipment available? Please feel free to contact us. Viewing is possible by appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used plate shear from LVD. Kjdpfx Asz Dwtqohgsnb Type CS 3100 / 6 Capacity: 3100 x 6 mm Electrically adjustable back gauge and cutting angle Manually adjustable shear gap Rear safety guard

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Ksdpfx Ahoz Damtegonb Includes Heidenhain probe. Tool holder: SK 40. The zero-point clamping plate shown on the table will be removed and is not included in the sale.

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm gear width 400 mm max. module 10 min. module 1 total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m Knjdpez Drcaofx Ahgob

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Type: KONTEC KSG 100 Kedpfsy Uvk Iex Ahgsnb Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Height: 250mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Knodpjzpvumefx Ahgob Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. Knsdszdz U Ujpfx Ahgsb The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Müller Weingarten CT 4.53.7 Press / Punching Press – Industrial Press For sale is a Müller Weingarten CT 4.53.7 industrial press / punching press. The machine comes from an industrial facility and shows signs of wear and tear consistent with its age and use. The machine is currently on a pallet and can be inspected by appointment. Technical specifications according to the machine nameplates: Kjdpfx Asz Dwrtehgenb * Manufacturer: Müller Weingarten * Type: CT 4.53.7 * Order number: 224 352 * Dwell time: 50 ms * Safety distance: 100 mm Condition: functional Due to its size and weight, appropriate collection or suitable transport must be arranged.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system 2 tables, 1100 x 600 mm 40-tool changer Kjdpfsy Ndlpjx Ahgenb BT40 spindle Maximum spindle speed: 20,000 rpm 2 chip conveyors

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 330 mm, turning length: 750 mm, total length: 1,330 mm, total width: 750 mm, total height: 700 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 60 rpm, overall weight: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, most commonly with surfaces of rotational solids (shafts, cones, spheres, internal and external threads). The machining tool is usually a turning tool, drill, or threading tools. Thanks to modern solutions and equipment, the lathe is perfectly suited for professional and industrial work. Knsdpfxoyvfzqj Ahgob Equipment 3-jaw chuck 160 mm Coolant system Dead center MT3 Lathe stand Change gears for thread cutting Work light Optional equipment 2-axis digital readout (DRO) Technical Specifications Turning diameter over bed – 330 mm Maximum workpiece length – 750 mm Maximum turning diameter over cross slide – 220 mm Chuck – 160 mm Spindle bore – 38 mm Spindle taper – MT5 Number of metric thread types – 20 Metric thread range – 0.5 – 4 mm Inch thread range – 9 – 40 T.P.I. Longitudinal feed – 0.135 – 1.80 mm/rev Tailstock quill travel – 70 mm Tailstock taper – Morse 3 Number of spindle speeds – 12 Spindle speed range – 60 – 1650 rpm Motor – 1.1 kW Dimensions (L × W × H) – 1330 × 750 × 700 mm Weight – 320 kg Delivery to the customer is possible. Delivery cost is determined individually according to the transport company quotation. If you are interested in other machines, please visit our website.