Used Metal Detectors for sale (35,374)

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Kodet Ac D Uspfx Ahvsww Good condition

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11105234, TECHNICAL DETAILS Maximum load capacity: approx. 37 kg Rated load capacity: approx. 30 kg Maximum reach: approx. 2101 mm Position repeatability: 0.05 mm (ISO 9283) Number of axes: 6 Operating ambient temperature: 0 °C - 55 °C (273 K to 328 K) Ambient temperature for storage & transport: -40 °C - 60 °C (233 K to 333 K) Positioner Model: KUKA DKP400 V2 Two-Axis Positioner Electrically insulated faceplate Air chiller Model: Thermo Chiller HRS050-AF-20 MACHINE DETAILS Drive Model: Meltio Engine V2.0 Power: 7.5 kW Frequency: 50/60 Hz Full load current: 22 A 3W + N + PE, 200-240 / 380-415 V, 16A 3W + PE, 200-240 V, 25 A 2W + PE, 200-240 V, 40 A Control Kjdpjyvzuhsfx Ahvoww Model: KR C5-2, KR C5 Integrated software: Melito Engine Dual Wire & Melito Engine Hot Wire Protection rating: IP65 (IEC 60529) Wrist protection rating: IP65 / IP67 (IEC 60529) Dimensions Overall dimensions (L x W x H): 5,000 x 4,000 x 4,000 mm Sliding door opening dimensions: 2,000 x 3,000 mm EQUIPMENT Laser safety cabin, lightproof 4 controllers in one system Roof closed and removable Note: Images 1 & 2 show the assembled state at the previous operator.

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers Kwodpeyvzb Uefx Ahvow diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Kedjyvy Uyepfx Ahvoww Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Kodpfx Ahoyvy Sfevjww Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t

Condition: excellent (used), Motorized folding bench, swing bending machine, bending machine (used) Manufacturer: GEKA Model: MA 200 Year of manufacture: 2003 Working length: 2040 mm Max. sheet thickness for St 37: 3 mm Max. sheet thickness for Al, Al Mg 3: 4 mm Max. sheet thickness for V2A: 2 mm Opening width of the upper beam: 180 mm Adjustability of the lower beam: 60 mm Max. bending angle: 135° Backgauge, mechanically adjustable by hand: 0 – 750 mm Weight of the machine: approx. 2600 kg Drive power: 3 kW Required space (L x W x H): 3600 mm x 2000 mm x 1400 mm The machine comes from a research center and is in very well-maintained condition. Kwjdsyvuh Uepfx Ahvew Forklift available for free loading onto truck Affordable shipping available Location of the machine: 48477 Hörstel

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Kodpfx Asrwxkhohvoww Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bending on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 23000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: new, maximum load weight: 12,451 kg, overall weight: 16,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, * Extendable loading area * Knorr air brake system * 3 axles with drum brakes * Front and rear grilles ----* Tire size: * Technical gross weight: 16,000 kg * Unladen weight: 3,540 kg Kodpfsyvnwiex Ahvjww * Overall length: ----Vehicle number: 11937----Subject to errors and prior sale----Advertisement and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of them for you. Among other services, we can offer you the following for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Assistance with export license plates Transport of vehicles Vehicle registration Recovery and vehicle transport---- YOUR VTS TEAM

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Kjdpfx Ahex Ruphjvsww Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: ready for operation (used), Cheap separator without control cabinet requires new belt Kwedowl N Hqopfx Ahvsw

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 854 h, year of last overhaul: 2025, Equipment: documentation/manual, Offered direct from first ownership: ----- THALMANN Double Folding Bending Machine – Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system ----- The machine was purchased new from Thalmann in 2020 and installed in our sheet metal workshop in 2021. With only 854 recorded pump hours, it has seen very little use and is therefore in excellent condition. The reason for sale is simply due to insufficient utilization of the machine. It can be inspected and tested at any time in the Munich area. Manufacturer: Thalmann Kwjdpfx Aheyu Sbnjvew Model: TD 150 - 6.4M Year of manufacture: 2020, 854 pump hours Condition: Excellent Category ID: 1472 Type ID: 1258 Machine type: Panel Folding Machine ---- Included additional equipment: - Freely running cutting unit, 1.5 mm steel, 1 unit - Curved clamping beam, ratio H x D = 1:2, 1 unit - Additional gripper/stop finger unit, 3 units - Clamping beams made from high-strength HARDOX steel, 1 unit - Hydraulic material thickness adjustment, 1 unit - Automatic sheet loading and handling table, 1 unit - Automatic sheet turning device, 1 unit - M-Guard remote maintenance support (instead of TeamViewer), 1 unit - LED bending line illumination with RGB color selection, 1 unit - Machine delivery, installation, and initial instruction, 1 service unit ----- If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, machine/vehicle number: 210907, saw blade diameter: 600 mm, Tronzadoras mitre saw Automatic sawing cycle Manual safety cover Hydro-pneumatic saw feed Adjustable rear stop Saw blade diameter: 600 mm Kwedpfx Asyu Huvshvow Cooling/lubrication system Angle adjustment: -22.5º to +135º

Condition: good (used), Year of construction: 2009, operating hours: 3,402 h, functionality: fully functional, machine/vehicle number: 2449-02, working width: 1,350 mm, type of input current: DC, overall weight: 6,000 kg, input voltage: 400 V, nominal power: 68 kW (92.45 HP), The machine is from 2009. Original price 200,000 CHF. Fully functional, with infeed table and dust extraction connection. Equipped with 2 sanding rollers and 1 disc for grinding and deburring. Various sanding belts included, as well as 1 disc for edge rounding. Condition as shown in the pictures. The machine has 3402 operating hours. It was only used for the processing of visible surfaces. Kwjdpfoyu Hlujx Ahvsw

Condition: not inspected (used), Year of construction: 1982, machine/vehicle number: 24459, functionality: unexamined, table length: 600 mm, table width: 600 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item within the period from 04/05/26 to 07/05/26. TECHNICAL DETAILS Table dimensions: 600 mm x 600 mm MACHINE DETAILS Dimensions & weight Kwodpjyr Nrrefx Ahvew Dimensions (L x W x H): 1,000 x 800 x 2,000 mm Machine weight: 400 kg External reference: Lot 76

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm Ksdpfxerh Dkys Ahvoww - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cap - documentation - 400V

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, input voltage: 400 V, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - double miter - 4 pneumatic clamps - Hydrocheck system - mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - blowgun - protective cap - documentation - 400V Kodohzuu Nopfx Ahveww

Condition: used, functionality: unexamined, Conveyor belt with metal mesh, 790 cm Dimensions: 7900x400x580 mm Our reference: 229 Ksdpfx Ahjyuvgzsvjww Net price: 2,000 euros

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Kodpfxsrxt Axe Ahveww Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Kwedpfx Aorxt Hqehvow Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Kedpfxowb E Uvo Ahvsww Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Kwedpsw T Sc Ajfx Ahvew Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Kedpfxewbh Dyo Ahvjww Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, - Saw blade 400 mm - Double miter - 4 pneumatic clamps - Mist lubrication system Kwjdpfx Aju Si Ndjhvow - Blow gun - Protective cap - documentation - 400V

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. Ksdpfx Ajyga T Nshvsww The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Kwodpfox Sz D Iex Ahvjw Application Types Other Sheet Metal Machinery