Used Metal Construction for sale (61,415)

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Hodpfxsvvll Ss Afijnu Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Year of construction: 1997, operating hours: 6,542 h, condition: ready for operation (used), This Salvagnini P4M-2512 was manufactured in 1997. It operates on 400V, 50Hz, with a nominal current of 38A and a short circuit current rating of 10kA. It can process panels up to 2500mm diagonal and 1.5mm thickness, and includes a cooling unit and feed table. If you are looking to get high quality sheet metal processing capabilities consider the Salvagnini IP 54 machine we have for sale. Contact us for more information. Hnedpfxexn Dmhs Afieu Application Types Other Sheet Metal Machinery

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Hnodpfx Afegd Si Eeisu Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Hnsdpfxexnnfbs Afisu Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: excellent (used), Year of construction: 1990, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Vertical metal band saw Manufacturer: INTERKONT Model: Select SB-4 Year of manufacture: 1990 Condition: very good Offer type: used machine Technical data: Cutting height: 305/270 mm Throat: 405 mm Drive type: electric/mechanical Hnjdpfsg Sm Igjx Afisu Drive output: 0.75/1.1 kW Notes: Butt welding unit, Infinitely variable blade speed, Tilting saw table 500 x 500 mm Weight: 450 kg The machine is in very good and fully operational condition and can be inspected and demonstrated at any time at our premises. We would be pleased if our offer is of interest to you. Subject to errors, changes and prior sale.

Year of construction: 2022, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 18521 Description: 2022 Dynaset KPL hardly used for sale. High-pressure water deep cleans the streets and removes sand and dust from the pores in the asphalt. Hodpfewi R S Ajx Afionu Ready for delivery.

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Hnjdpfexm U S Sex Afiju Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Year of construction: 2015, operating hours: 3,337 h, condition: ready for operation (used), General Data Measurements width 2330 mm Measurements depth 2360 mm Measurements height 1850 mm Machine weight 2500 kg Main Drive Spindle motor power 6 kW Number of axis 2 Additional Equipment Saw Band: 5090 x 34 x 1.1 mm Hjdpsxnd Nvjfx Afienu This KASTO Win A 3.3 was manufactured in 2015. A robust metal band saw, it features a 6 kW drive, operates on 400V/50 Hz, and handles a cutting speed of 12-150 m/min. The saw band measures 5090 x 34 x 1.1 mm, and it includes a 120-liter coolant system with a chip conveyor. Ideal for cutting dimensions up to 330 mm in height and 350 mm in width. Contact us for more information about this machine. Application Types Sawing

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) Hsdpoxdttpofx Afionu - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Year of construction: 2023, condition: used, Solvent volume: approx. 455 l, heating capacity: approx. 3.3–13.2 kW, compressed air supply: approx. 7–10 bar, max. batch weight: approx. 80 kg, max. throughput: approx. 20 batches/h, control: SIEMENS Simatic HMI Hnodpfx Afexnakpsiou

Year of construction: 2011, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20972 Hodewyabzjpfx Afijnu Description: 2011 wheel loader asphalt milling machine. Owner says it should work and is ready for use. Ready for delivery.

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Hsdpfjg U Uv Rex Afijnu Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, Year of construction: 2001, max. load capacity: 1,500 kg Hsdpexnalgefx Afionu

Condition: used, Please contact ATS Norway for more information Hnedovg Apvepfx Afieu Please provide reference number upon request: 18847 Description: Trimble GPS. Comes with radio. Can be used with binoculars. Ready for delivery.

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Hnodpfxjhk Df Ds Afisu Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21145 Hnsdsw Ruylopfx Afiou Specifications: Cassette length: 2–4 m Base model height: 2.40 / 2.60 cm Top model height: 1.30 m Vertical pipe clearance: 1.51 / 1.56 m Ready for delivery

Condition: as good as new (ex-display), Year of construction: 2025, OPTIsaw 131 GH - Metal band saw ideal for light sawing work. Mitre sawing from -45° to +60° via swivelling saw bow Metal band saw with low noise operation 3 saw band speeds Ball bearing mounted 3-point saw band guide Three switchable saw band speeds Quick hold of the workpiece due to quick clamping vice Standard with high quality bi-metal saw band Hsdob S Uzropfx Afisnu Base plate and saw bow made of grey cast iron Material stop emergency stop impact switch, motor protection switch Easy to read scale for angle adjustment Scope of delivery: Material stop Bi-metal saw band (10-14 ZpZ) Machine base Technical data Cutting range 0° Round Ø 128 mm Cutting range 0° rectangle 100 x 150 mm Cutting range 45° round Ø 94 mm Cutting range 45° rectangle 94 x 78 mm Cutting range 60° round Ø 56 mm Cutting range 60° rectangle 56 x 56 mm Lifting the saw-bar manually Feed infinitely variable saw band speeds 22/31/55 m/min. Saw band dimensions 1638 x 13 x 0.65 mm Motor power 1,1 kW 230 V ~50 Hz Dimensions Length 1000 mm Width 530 mm Height lower end position saw bow 1060 mm upper end position saw bow 1320 mm Net weight Location: Ex warehouse 54634 Bitburg

Condition: used, Serial number: xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21255 Specifications: Hodpow Ucl Dsfx Afisnu 2000 L Weight: 800 kg Steel Can be purchased individually Ready for delivery

Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Item number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Hnodpfogx T I Uex Afisu Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21254 Description:Jib with S60 mount.Ready for delivery. Hnedew Uci Njpfx Afiou

Year of construction: 2022, operating hours: 72 h, condition: used, Serial number: AMOxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21151 Specifications: 2022 model Hours: 72 Weight: 2,950 kg Stage 5 engine Remote control Good tires Ready for delivery Hnodpfx Afjw R Nnqeiou Hours: 72 Own weight: 2950 Model: F10

Year of construction: 2023, condition: used, Serial number: 202231xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19326 Specifications: - 2023 model Hjdpovg Ardjfx Afisnu - Unused, stored inside - Grinding equipment for blades - Automatic data generator - Bought and installed by Norwood Description: It was bought in 2023 and is unused. stored inside all the time. It is sold and fitted by Norwood. Automatic data generator. Can be delivered within a short time.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21085 Hnodpfx Afew Nvgkjieu Description:Various laboratory equipment supplied by HECO for stone quality control.Sold together with the container.The equipment was recently in use and is functioning properly.A complete equipment list is attached as an image.Quick delivery possible. Own weight: 3000 Model: Laboratorieutstyr til steinprøver

Year of construction: 2010, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21293 Specifications: Hedpfxoxb N Dxs Afisnu Approx. 2010 model S70 coupling Functions as it should 645 kg 172 bar Ready for delivery Own weight: 645 Model: HS11000

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19985 Description: 120 liter Kramer & Grebe chopper. New engine, axle, bearings and overhauled belts. Hedpfov U Shkex Afienu 230 Volt cabinet included. Can be delivered at short notice.