Used Melting Furnace for sale (1,103)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Codpfx Aaed I T Exs Eegp

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer Csdpop T Th Hefx Aa Eegp type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel Codpep T T Hnjfx Aa Eogp TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Cgsdju A Tf Djpfx Aa Eop Few hours of use

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C Cgsdpoxpuahsfx Aa Eep temperature uniformity: ± 5°C (150-600°C)

Condition: excellent (used), max. temperature 1200 Grad Csdpfx Aaoxcblds Ejgp size of opening 220 x 120 mm depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Cgedpexb A E Ajfx Aa Eep Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm

Condition: used, Nordson Problue 7 Hot Melt Pump Cjdpfxswq S Eye Aa Eegp Model Problue 7

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles 240 Volts 7200 Watts Cedpfxourf T Dj Aa Esgp 50 / 60 HZ In good working condition

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Cgjdpowq Sv Esfx Aa Ejp Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: new, Type: New Boiling Melting Fat 300 Liter Completely stainless steel Integrated mixing system Double insulating wall Possibility of boiling the mass Cgjdpfx Aasf Saa As Eop Volume: 300 liter Electrical power: 12kW Machine dimensions in cm: Length: 161 Width: 124 Height: 123 Delivery time: 1 working day after advanced payment

Condition: new, Type: New Boiling Melting Fat 600 Liter Completely stainless steel Integrated mixing system Double insulating wall Possibility of boiling the mass Cgodpfx Ajf S A Inea Eep Volume: 600 liter Electrical power: 24kW Machine dimensions in cm: Length: 187 Width: 158 Height: 123 Delivery time: 1 working day after advanced payment

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Cgedpsuhmacefx Aa Eep Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: good (used), Year of construction: 2008, Hot Melt Adhesive Machine Nordson ProBlue 4, Adhesive Melter, 4 Litre Hot Melt Adhesive – used - : Price ex-location: only €2,950 (net)! Csdpfx Ajw Rcgyja Esgp More units coming soon! Manufacturer: Nordson Model: ProBlue 4 Year of manufacture: 2008 102223OA AC 200–240V, 50/60Hz, 26A, 1/3 Dimensions: - Length: 540.0 mm - Width: 340.0 mm - Height: 480.0 mm Weight: 50.0 kg Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2018, 2 Meler Hot Melt Adhesive Machines, Adhesive Melter, 5 Liter Hot Melt Adhesive – used – : Price per unit ex works: only €2,950 (net)! Manufacturer: Meler Model: Micron 5 Year of manufacture: 2018 Ref.: 101002240 Micron 5/4 N Codpjw S E Nasfx Aa Eegp Serial number: e.g. 1J800918 Outputs: 4 TANK CAPACITY: 5.15 liters MAXIMUM ALLOWABLE BLOCK VOLUME DIMENSION A: 192 mm DIMENSION B: 182 mm DIMENSION C: 106 mm MAXIMUM MELTING CAPACITY: 9 kg/h (*) PUMP PERFORMANCE: 29.3 kg/h Pump 7 cc (*) 66.0 kg/h Pump 19 cc (*) NUMBER OF OUTPUTS: 4 TEMPERATURE RANGE: 0 to 200°C (104 to 392°F), optionally: 40 to 230°C (104 to 446°F) TEMPERATURE CONTROL: RTD ± 0.5°C (± 1°F) MAXIMUM OPERATING PRESSURE (AT 6 BAR): 81.6 bar (1,183 psi) DIMENSIONS (L x W x H): 587 x 341 x 481 mm 587 x 341 x 628 mm (with lid open) WEIGHT: 37.5 kg (unfilled) 1-N/PE 230V, 50/60 Hz, 7.1 kW 3-N/PE 400/230V, 2.4 kW Condition: Good Available: Immediately Location: Frankenberg / Saxony warehouse

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Country of origin: The Netherlands Csdpewi Ry Hsfx Aa Esgp Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Year of construction: 2006, condition: as good as new (ex-display), Only been used for a short time in the technical center, therefore in very good condition. We are always available for further questions. Cgjdpfxsl Slv Tj Aa Esp

Condition: excellent (used), functionality: fully functional, Different MAAG Melt Pumps available Cododq Ak Uopfx Aa Esgp - For example Extrex 110 , 90 , 70 , 56 , 36 - Possible to order complete on a frame with , motor , gear , cardan and a controll cabinett.

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm Codpfsi Db Dbex Aa Ejgp depth of chamber 680 mm volume 60 L voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Electrical connection: 400 V kW Cgodpfx Aast Ebpuo Eep Space required: 1200 x 870 x 1810 mm Weight: 470 kg Heating output: 16.5 kW

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, temperature: 630 °C, power: 450 kW (611.83 HP), plate length: 1,400 mm, plate width: 1,100 mm, TECHNICAL DETAILS Device type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: clear float glass Maximum glass size: 1,400 × 1,100 mm Furnace Furnace width: 1,600 mm Opening/closing height: 500 mm Opening mechanism: electric Motor power for opening/closing: 1.5 kW Temperature: 630 °C Rollers Roller type: quartz rollers Roller diameter: 60 mm Number of quartz rollers: 46 Number of rollers in the cooling section: 22 Roller spacing: 100 mm Heating Heating system: electric with forced convection Heating power: 450 kW Control: PLC control with zone-dependent temperature regulation Speed Speed range: 1 – 10 m/min MACHINE DETAILS Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total weight: 10 t System configuration Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process sequence 1. Glass loading: The flat glass is placed on the loading table and transported into the heating section. 2. Heating: In the heating section, the glass is uniformly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Cooling (Annealing): In the cooling section, the glass is uniformly and slowly cooled to reduce stress. 5. Glass unloading: The processed glass is conveyed to the unloading table and removed. EQUIPMENT - Computer - Control cabinet Cgsdowtfiqjpfx Aa Eep - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table - Zone-wise controllable heating system via PLC control - Forced convection system for uniform heat distribution - Quartz rollers with close spacing for precise glass guidance - Integrated cooling section with 22 rollers for controlled glass cooling The furnace has been dismantled into components of approximately two meters in length. This allows transport with standard trucks.

Year of construction: 1989, condition: used, max. temperature 1000 Grad size of opening 170 x 90 mm depth of chamber 280 mm Cjdpfstqqptox Aa Ejgp total power requirement 3 kW weight of the machine ca. 80 kg dimensions 0,7 x 0,55 x 0,72 m

Year of construction: 1996, condition: used, functionality: fully functional, load capacity: 650 kg, IPSEN DAQ 7-8 Manufacturing Year : 1996 Heating : Gas Heaters : Recon 2 (x3) Charge Capacity : 650kg Brutto Charge dimensions : W:650mm L:1173mm H:550mm Protective Gasses : Endogas Cjdpfsxivumox Aa Ejgp Ammonia Nitrogen The furnace can be operated with existing conditions.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Cgsdpfxjwmfyvj Aa Eep Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: ready for operation (used), functionality: fully functional, HEAT TREATMENT FACILITY WITH SCADA CONTROL SYSTEM AKF1 İPSEN TQF 4 EM 1977 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF2 İPSEN TQFRA 5 EM 1991 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF3 İPSEN T4 EM 1972 model Atmosphere controlled Chamber type furnace (1 Piece) • AKF4 İPSEN TU-5 EM 1970 model Atmosphere controlled Chamber type furnace (1 Piece) • HSH 2011 model high temperature stress relief, bright annealing (1 Piece) • İpsen Dac 5 ER 2011 model nitriding, high temperature stress relief (1 Piece) • İpsen DAC 4 1980 model high temperature stress relief, bright annealing (1 Piece) • HSH 2007 model high temperature stress relief, bright annealing (1 Piece) • BOREL 1987 model well stress relieving furnace (1 Piece) • 1972 model Ipsen stress relieving furnace (2 Pieces) Cgodpfx Aajwgmp Sj Eep • Loading car (1 Piece) • Unloading car (1 Piece)