Used Melting Furnace for sale (1,089)

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Rsdpfsyfv N Rsx Ahcecf

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Rjdpfjy N Uxgox Ahcjcf

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Rcsdpfx Aovxvgrshcjf

Condition: ready for operation (used), A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Rcodpfx Ahjyvix Iocjf

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Rcodow Emyzepfx Ahcef

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Rcodpfxezhw Sds Ahcof

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Rodpfeygw S Aex Ahcscf

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Rcedpetxb Avjfx Ahcjf

Year of construction: 2017, condition: ready for operation (used), A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible. Rsdpfxswynvme Ahcjcf

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Rcjdpfetxb Apsx Ahcof

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Rodpfx Aezdum Rjhcjcf

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Rcjdpjtndwuefx Ahcjf

Year of construction: 2001, condition: ready for operation (used), A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment. Redjzgwyfjpfx Ahcecf

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Redpfx Aezuabzohcocf Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 1997, 2 pcs of furnace oil power transformers with tap changer; manufacturer SGB Germany; 28MVA; 22kV/430-150V; 735-290A at 22kV; 37600-42620A at 430-150V, Dd1, OFWF, functional, design documentation, rutine test reports, year of manufacturer 1997 and 1999 Rcedpezt Nryofx Ahcof

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and a length of up to 300 mm. The hopper feeder sorts the parts and automatically loads the inductor with consecutive pieces for heating. The feeder is ideal for producing large nails, screws, etc. Its operation can be seen in a YouTube video. The efficiency is very high. For small elements, heated parts at 1100 degrees are retrieved every 6 seconds. We have two inductors for the furnace to heat materials with thicknesses up to 20mm and up to 16mm. It is possible to modify the furnace to suit your needs. Replacing the inductor with other sizes costs approximately 3000 EUR. The machine is very versatile in terms of the sizes of heated products. Rcsdpfx Asw Hqldehcsf It is possible to heat flat bars, round rods, or square rods.

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] Rcjdpfoug U Thjx Ahcef - voltage : 3 x 380 [V]

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Rcodpfx Ajztrbwshcjf

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Rodpfx Ahsztrbkjcjcf

Condition: ready for operation (used), Used stainless steel tank with double jacket Last use: Food processing TANK HAS BEEN CLEANED! Item number: 10247 Volume: approx. 400L Type: Standing on legs Rcsdpfxod A Tt Ae Ahcjf Material (in contact with media): 1.4301 / AISI304 Design: Double jacket Bottom: Dished bottom Top: Flat bottom with hinged lid Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 930mm Cylindrical height: 450mm Overall height: Approx. 1220mm Height of legs: 480mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Double jacket around cylinder and bottom Various connections Hinged lid Agitator mount Nameplate

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Excellent Condition: Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Condition & Terms of Sale: Please note: The furnace is being sold strictly on an "AS IS, WHERE IS" basis directly from our warehouse. The furnace was professionally dismantled from a working cleanroom environment. All wiring and connections are carefully labeled for easy reassembly by the buyer. For full transparency: Two internal graphite heating elements were damaged during the dismantling process and will require replacement. Otherwise, the equipment is 100% complete and ready for immediate relocation. You are highly encouraged and welcome to physically inspect the equipment in our warehouse near Białystok, Poland, prior to purchase. Rsdpozkwp Iefx Ahcecf ##### Equipment Overview: Furnace chamber made entirely of stainless steel, double-walled for water-cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and service. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, HOMAG Pre-melting unit for Quick-Melt system Rcjdjztl Nbopfx Ahcof

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, immediately available -Tmax 1350°C -Usable internal volume (L x W x H) (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions (L x W x H) (mm) 4200 x 2500 x 3500 -Footprint (L x W x H) (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Includes: Redpfszr U Anox Ahcjcf -Protective gas buffer tank -Vacuum pump connection -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -Connection for liquid nitrogen, allowing the oven to cool down to -80°C. -Internal insulation made of graphite felt, protected and reinforced with CFC. We will build a second identical oven starting at the end of the year. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial ovens. Inspection in our warehouse is available upon request! Industrial oven, vacuum oven, vacuum furnaces, vacuum hardening oven, hardening furnaces, sintering oven, sintering furnaces.

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box Rcedszpw Sajpfx Ahcef The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: used, functionality: fully functional, The manufacturer cannot be identified with 100% certainty as there is no nameplate on the entire machine. The machine is located in 06502 Thale. Machine type: Drum melting system for 200-liter containers Material transport: Motor-driven pump Lifting system: Pneumatic Melting system: Heated pressure/melting plate with two rotating seals Control: Separate control cabinet Rjdozr Edpspfx Ahcocf A detailed description/documentation of the drum melting system can be found in the appendix.