Used Mech Plate Shear for sale (12,424)

Condition: new, Bernardo motor plate shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Maximum sheet thickness * 3 mm Cutting angles 1° 30' Strokes / min 31 Working height 810 mm Back gauge 0-750 mm Table width 390 mm Motor 4,0 kW Width 2600 mm 2100 mm deep Height 1260 mm Weight CA. 1710 kg Material I a tensile strength 400 N / mm² Properties Fitted with metal high restraint, optimal for thin sheet metal Support arms on the front panel for easy editing of large panels Motorized Backgauge, precise method of Ballscrews Clearly structured control panel with integrated controller Robust steel sheeting construction for vibration-free operation Support table with erected fence on both sides High operator safety protection coverage and photo cells at the back of the machine 2-edged blade made of quality steel guarantee a clean and grafreies cutting Automatic hold-down device for the fixation of the plate Scope of delivery Cutting line illumination Motor NC Backgauge Front trays Side attacks Fender with photo cells Dusdpfed Hxnhsx Afksp NC BRL 401.2 Pneumatic sheet high retaining device Foot pedal with emergency stop Blades made of tool steel

Condition: used, Year of construction: 1999, sheet width 3060 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 Dsdpfx Afexaci Ejkeup total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm Dedpfexacfaox Afkoup down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 6 mm distance between columns 3460 mm table height 800 mm 0 220 bar cutting angle adjustment 0,5x3 ° down holder 18 back stop - adjustable 750 mm front stop - adjustable 1000 mm main drive 7,5 kW oil volume 300 l Dedpfx Asynbc Usfkeup total power requirement 7,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7x2,0x1,8 m cutting angle adjustment manually blade gap adjustment manually angle stop

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - operating instructions Dujdpfx Afsyk Dhxskep Special equipment: - Return to transmitter (sheet metal output to the operator) - Scrap switch - Angle stop 0-180

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Duodpfexabvqjx Afksp Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment Dusdpfx Afexaaghekop - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Year of construction: 1964, condition: ready for operation (used), Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible. Dujdpfx Afsym Dgaskep

Condition: good (used), Year of construction: 2003, You are bidding here on: a branded folding machine from a very reputable and well-known manufacturer – Schechtl. Device specifications: - Schechtl KSV folding machine – reinforced build - Rail bends precisely - Angle indicator - Bending length just over 2m - Sheet thickness: 1.5 mm for steel, more for aluminium, zinc, etc. – up to 2 mm - Standard rail – radius for aluminium or zinc is also optionally available - Foot pedal closer Dusdpfxeym Am Eo Afkop - Optional: depth stop, 500 mm, additional rails - Schechtl guillotine shear - Usable length: 2m - Sheet thickness: 1.25 mm (more for aluminium) - Depth stop: 750 mm - Optional storage / tilting table (after cutting, the table tilts the cut material at an angle) - Extendable sheet support - Additional accessories and tools available on request, such as tube bars, holders, and tool sets, etc. - Matching mechanical and electric guillotine shears in stock – please inquire for set pricing; we can configure it for you as required. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing in our shop, such as various rails, depth stops, folding machines, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines, and a variety of accessory parts (hemming devices, round rollers for gutter production, back gauges, etc.), as well as additional hand tools and spare parts from top manufacturers – all in stock. Invoice with VAT shown. Free loading available – weight approx. 950 kg and 700 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by buyer (or by a shipping agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from motorways A3 and A81. Article numbers: Folding Machine KSV, Guillotine Shear HT.

Condition: used, Hydraulic guillotine shear Make: LOTZE, Model: KSHY 20 Year of manufacture: 1970 Dujdjwtyqispfx Afksp Technical Data Manufacturer: LOTZE Model: KSHY 20 Year: 1970 Usable length: 2040 mm Sheet thickness: 5 mm Dimensions (L x W x H): L 2.5 x W 1.70 (plus support arms) x H 1.5 m Weight: 4 t Equipment • Angle stop • Support arms • Manual rear gauge 400 mm All details without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: NC control, Motorized Guillotine Shear Manufacturer: Knuth Model: KMT 2500 x 4.0 mm Year of manufacture: 2017 Technical Data Brand: Knuth Model: KMT Year: 2017 Working length: 2550 mm Sheet thickness: 4.0 mm (450N/mm²) Cutting angle: 1.5° Duodsw Naghopfx Afksp Strokes/min: 42 Motor power: 7.5 kW Weight: 3.2 t Dimensions: L 3.10 x W 1.70 x H 1.30 m Equipment • Support arms • Motorized backgauge 600 mm • Pneumatic sheet supports • NC control • Cutting line illumination • Foot switch All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Technical data: maximum cutting width: 3100 mm Duedov H Rwzopfx Afkop maximum cutting capacity steel St40: 10.0 mm kerf adjustment adjustable rip fence motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1992, gebraucht 1992 090174 März 2026, Zwischenverkau Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings Dedpfx Ajyi Hppefkoup 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES

Condition: used, Year of construction: 1994, sheet width 3000 mm Duodpfx Afjt Tqkdjkop plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 51600 € 975.24 € 3080 mm 6 mm 4 mm 350 mm 20 1/min 0.5 - 2 ° 16 20 to 1000 mm 200 mm/s 11 kW 125 l 3 Stk. 820 mm 494 mm 3280 mm 4100 mm Dujdpswirwtofx Afkop 2050 mm 3650 mm 1950 mm 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Dujdpfjwiqygjx Afksp Türkei 145000 € 2740.5 € 6080 mm 6 mm 4 mm 350 mm 10 1/min 0.5 - 2 ° 29 20 to 1000 mm 200 mm/s 22 kW 200 l 5 Stk. 900 mm 630 mm 6370 mm 7300 mm 2150 mm 3400 mm 2750 mm 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Duedpfx Afjxpuipekop

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 Dusdpfx Aexwmv Defkep working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment cutting angle adjustment

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Dedpjd Hxx Asfx Afkjup Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Dodpfx Aev Tk Exsfksup Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: good (used), Guillotine Shear HT 200 Capacity: 1.25 mm steel – aluminum and more Cutting length: slightly over 2 m Back gauge Extendable front support Folding Machine KS – Capacity: 1 mm steel – more for aluminum (up to 1.5 mm) Bending length: slightly over 2 m Foot closer Optional: back gauge or Beading device Roller sets and additional rails Sold according to §25a of the German VAT Act Dodpjyknd Refx Afksup Machines are in proper condition and immediately operational Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various rails, back gauges – everything related to sheet metal and steel processing, including folding machines, guillotine shears, drill presses, slip rollers, slitting and profiling machines - accessories (beading devices, round rollers for gutter manufacturing, rear gauge, etc.), as well as other hand tools and spare parts from many top manufacturers. Please feel free to contact me with any questions. You will receive an invoice according to §25a UStG (the VAT is included in the amount – margin scheme taxation). Free loading available – weight approx. 750 kg and 650 kg. Inspection and test run are possible and encouraged after making a telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from motorways A3 and A81. Item numbers: Folding Machine KS and HT 260107 260108

Year of construction: 1975, condition: good (used), Machine number: 1019 TyP / Model: NG 3B Working width: 2.000 mm material thickness: 3 mm table: 2.005 x 400 mm column width: 2.100 mm Stroke: Stroke rate: 50 /min backgauge: 400 mm Connection: 5,5 kW accessories/equipment: foot release Condition: good weight: 3 t Dedpfxjh N S Uce Afkeup dimensions: 2.600 x 1.350 x 1.500 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Duedpsygw Epofx Afkjp Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Dusdpfx Afexvinmokop Please feel free to contact us for a quote.

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Duedpfovc Amtsx Afksp Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *