Motorized roller table

MAYER RGM 770

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025. Ljdpfx Aot N Antjnusac

Condition: good (used), Year of construction: 1985, functionality: fully functional, type of input current: three-phase, Lenght :10400mm/ piece Roller lenght: 1000 mm Roller diameter : 90 mm Lasdpfx Ajdbacvonuec Space between rollers: 120mm Weight cca: 1800kg Stock: approx. 70m!! diferent sizes.

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device Lasdpfx Aeim Ildenusc - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Year of construction: 2001, condition: good (used), Heavy-duty roller conveyor, 2 units, driven Overall height: 600 mm Width: 1400 mm Length: 7000 mm Lajdpfx Aneh Icrnsuoc All dimensions are approximate System is immediately available and has already been dismantled.

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Ljdsywhhkopfx Anuoac Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: new, functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner Protec KT 300 H, 170/400 special version with hydraulic height adjustment and safety lock against lowering. Hydraulic platform load capacity 500 kg. Horizontal load 300 kg, tilted load 150 kg. Power supply 220 V, 50 Hz. Table diameter 450 mm, hollow shaft diameter 170 mm, table height 500 mm. Welding current transmission 400 A. Quick-acting chuck diameter 300 mm, surcharge €550. Quick-acting chuck diameter 400 mm, surcharge €750. Mobile hydraulic height adjustment, surcharge €650 (with lockable castors). Counter-support yellow, stepless height adjustment €250. Crank drive motor, 0-90° stepless adjustment. Speed stepless from 0.01 up to approx. 5 rpm. Incl. foot remote control. Digital display with welding time limitation available on request. Lajdpfxowz Rfgs Anujc

Condition: excellent (used), Year of construction: 2002, CNC Turning-Milling Center GILDEMEISTER TWIN 500 Linear Year of manufacture: 2002 Siemens control system Technical data: Swing diameter: 610 mm Turning diameter: 610 mm Turning length: 1870 mm Drive power: 69 kW Spindle speed: 3,200 rpm C-axis torque: 650 Nm Main spindle - left Chuck diameter: 250–500 mm Max. bar diameter: 102 mm Laedpfjw Tarfox Anuec Upper slide Rapid traverse speed X/Y/Z: 45/24/70 m/min Slide travel X1/Y1605 / 105 mm Turning/milling spindle HSK 63A Max. spindle speed: 12,000 rpm B axis Swivel range B1: 120° Resolution: 0.001° Tool magazine Number of tools: 40 Tool length / Max. quantity: 350/40 mm

Condition: new, 30000 kg length 7000 mm width 2450 mm height 800 mm lenkbar lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle Lsdpfx Asqux S Senusac - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: new, 0 8000 kg gear diameter 75 mm 105 mm Width 190 mm length 370 mm height 100 mm Laedpfx Anevu E U Djusc loading area rund 100 mm weight Gesamt 70 kg dimensions 800 x 600 x 250 m Heavy-duty castors, 2-part Total load capacity 16 t. with turntable ATTENTION: Only 2 pieces are included in the offer.

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Cross table is well-made from high-quality materials Laedsvu Uwuspfx Anusc Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier