Used Material Feed for sale (24,597)

Condition: good (used), functionality: fully functional, CAMU Pneumatic feeding and straightening line with decoiler: - CAMU SCI 530 F decoiler - CAMU RSC 500/7 straightener line - Max. diameter: 1500mm - Max. weight: 3000kg - DieTronic coil lubricator width 500 mm Mape ANP 510 gripper feeder - width: 510mm Podovmn H Tepfx Aaljpl - Feed length: 500mm - Thickness: 0.7 – 3.7mm - Positioning accuracy: +/-0.05m

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. Ppodpfx Aovptz Iealjl – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: good (used), Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm -Dimensions: 870/45/H610 mm Ppodpfx Ajfth Sboalel -Weight: 6.4 kg

Condition: good (used), - Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Mass: Ppjdpfx Aajmn I Nqeljl - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change) Pjdpsx Rqr Ssfx Aalepl

Condition: used, Technical details: Pjdpfx Aasu Ic Ewoljpl sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm Ppedpsvgbgaefx Aaljl distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Technical details: plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. * Ppedpfsu Iczfsx Aalel

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. Podpfx Aeu Icgusalepl *

Condition: used, Technical details: Roll lenght: 1200 mm roll diameter: 95 mm Pedpfx Aaeu Nkv Tsljpl total power requirement: 1,5 kW weight of the machine ca.: 2,0 t dimensions L x W x H: 4,3x1,5x0,45 m 2 roller conveyor available - construction type: stable angle iron construction - rolls are driven via motor (380V; 2,15A mit 1400 U/min) - rolls are adjustable - conveyor belt size: 4100x1200mm *

Condition: good (used), Year of construction: 1995, 1 used center lathe Make MCM Type TC 300 x 2000 Year of manufacture 1995 Technical specifications: Center height 300 mm Turning diameter 600 mm Center distance 3000 mm Bed width 400 mm Spindle bore 82 mm Spindle nose Spindle speeds (24) 9 - 1600 rpm Motor power 7.5 kW (option: 9.2 kW) Z-axis feed X-axis feed Metric thread Pjdpfx Aaovzllcelepl Witworth thread Module thread Diametric pitch thread Cross slide LxW 660 x 230 mm Cross slide stroke 340 mm Top slide LxW 350 x 150 mm Top slide stroke 150 mm Tailstock taper MK 5 Equipped with Three- and four-jaw chuck Multifix head with various inserts Chip tray Steady rest Technical specifications. Errors excepted. This machine comes from a company that exclusively processed plastic and is in excellent condition.

Year of construction: 2018, operating hours: 4,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: COPR40801381, Capacity 15 m3 Road approval Air conditioning Psdpex Tcxcefx Aalspl

Condition: used, mileage: 472,500 km, power: 335 kW (455.47 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, soot filter, Actros 1846 LS !!! ADR HAZARDOUS GOODS: EX/II + EX/III + FL + AT !!! ClassicSpace cab, air conditioning, High Performance Engine Brake, Safety Pack, lane keeping assist, distance assist, attention assist, traffic sign assist, Blind Spot Assist, Active Brake Assist 5, 1x bed, alloy wheels, driver airbag, stability control assist, 2x electric windows, etc. Payload: 11,366 kg Unladen weight: 6,634 kg Front axle: LEAF SPRING SUSPENSION Rear axle: AIR SUSPENSION Ppjdpfxex Tbyfe Aalsl

Condition: new, Year of construction: 2025, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Ppodew U Scfepfx Aaljl Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Condition: used, mileage: 594,000 km, power: 331 kW (450.03 HP), first registration: 04/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania 4x2 tractor unit, Euro 6d, OptiCruise gearbox, retarder, R cab with 2 beds, adaptive cruise control ACC, lane assist, collision warning system, leaf/air suspension, differential lock, Alcoa aluminium wheels, independent air conditioning, auxiliary heater, heated seats, fridge, roof hatch, 2 tanks 500L/500L, xenon headlights, radio/CD/AUX, navigation system Pedpfox S Txqex Aaljpl 1st owner TÜV 04/26-SP10/2026 ADR FL /AT/ EXII /EXIII /OT 7 units available

Condition: used, mileage: 524,600 km, power: 335 kW (455.47 HP), first registration: 07/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, soot filter, Actros 1846 LS !!! ADR HAZARDOUS GOODS: EX/II + EX/III + FL + AT !!! ClassicSpace cab, air conditioning, high-performance engine brake, Safety Pack, lane keeping assist, distance keeping assist, attention assist, traffic sign assist, Blind Spot Assist, Active Brake Assist 5, 1x bunk, alloy wheels, driver airbag, stability control assist, 2x electric windows, etc. Payload: 11,366 kg Unladen weight: 6,634 kg Front axle: LEAF SPRUNG Ppjdpfxox S S Sps Aalsl Rear axle: AIR SUSPENDED

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Ppjdpfx Ajxta Dysalel

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN - very well maintained - fully functional Ppjdpfx Aasx Af D Rslsl - available immediately

Condition: used, mileage: 666,500 km, power: 330 kW (448.67 HP), first registration: 05/2021, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Engine 330 kW (449 hp), Euro VI, D, 2200 Nm, 2nd Generation OM471 engine, High Performance Engine Brake, Automated Transmission G 211-12/14.93-1.0 Mercedes PowerShift 3, ADR/GGVS equipment, PTO, rear axle differential lock, axle ratio i = 2.412, L-cab BigSpace, flat floor, continuous perforated frame, step plate above frame, partial frame overhang cover 1050 mm, main tank left 720 L + 75 L AdBlue, second tank right 430 L, lockable, standard 5th wheel coupling, Jost JSK 37C, 5th wheel height H = 150 mm, kingpin setback +600 mm, disc brakes front and rear axles, Electronic Braking System with ABS and ASR, hazard warning on emergency braking, electronic parking brake with acoustic warning, Predictive Powertrain Control, ESP (Electronic Stability Program), Lane Keeping Assist, Distance Assist, Attention Assist, Traffic Sign Assist, Active Brake Assist 5, cruise control, cab suspension comfort air-sprung, mechanical-hydraulic cab tilt device, tinted windscreen, light sensor, rain sensor, electric sunroof, external storage hatch left, external storage hatch right, storage box left under cab, door extension, ramp mirror, front mirror heated, external transparent sun visor, comfort central locking, comfort driver's suspension seat, functional passenger seat, velour seat upholstery, lower comfort bed, upper narrow comfort bed, leather multifunction steering wheel, driver airbag, carpeted engine tunnel, side sunblind driver's side, electric windows both sides, digital tachograph (2nd generation), ADR, tachograph manufacturer VDO, onboard diagnostics, trip computer, multimedia interactive cockpit, maintenance system, Remote Online, pre-installation Mercedes-Benz Truck App Portal, sound system, navigation system, Fleetboard Eco Support, prerequisite for Fleetboard Manager App, Truck Data Center 7, pre-installation for Truck Data Center 7, pre-installation for toll collection, pre-installation CB radio 12 V DIN slot, 24 V/15 A socket, entry lights passenger footwell in door trim, ambient lighting, auxiliary hot water heater, residual heat utilization in cab, extra thermal insulation, electric parking air conditioning, automatic climate control, bottle holder, A4 document tray, storage lid driver and passenger side, drawers under bed, storage compartments above windscreen, fridge in drawer under bed, compressed air connection inside cab, LED daytime running lights, halogen fog lamps, work lights below, side marker lamps, LED outline marker lamp, flashing side marker lights, Safety Pack, Climate Package, Interior Chrome Package, total tank capacity 1150 L, retarder. Ppodpfx Aasxfx Rpjlol

Condition: new, Year of construction: 2021, approx. 480,000 pieces Psdpfx Aasu Iw Efjljpl Cable Gland PG7 3-6.5 Grey Packed per 50 pieces Package price for taking full quantity € 0,01 per piece

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Ppodow Svtcepfx Aalsl Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Center height: 185 mm Spindle bore: 40 mm Speed range: 20 – 1,600 rpm Heidenhain VRZ 773 B digital readout on 2 axes (scale on cross slide and longitudinal slide) Dimensions: 1,900 x 900 x 1,700 mm Spindle brake with foot pedal Adjustable stop on cross slide (for feed stop) Splash guard Accessories: - Operating manual - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - 3-jaw wedge bar chuck Forkardt 200mm Weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is provided without guarantee, errors excepted, all dimensions are approximate. Offer is subject to prior sale and non-binding. Inspection by appointment possible. Technical data, specifications and prices are subject to change and prior sale. All prices are net plus VAT. Payment in advance within 14 days of conclusion of contract, including any applicable freight costs. If full payment is not received within this period, the seller reserves the right to cancel the purchase contract. Sale to entrepreneurs only as defined in § 14 BGB. The machine is sold with exclusion of any warranty for material defects. This exclusion does not apply to damage claims arising from liability for material defects, which are based on grossly negligent or intentional breach of duty by the seller or its agents, as well as for injury to life, body, or health. Any remaining warranty claims against third parties will be assigned to the buyer. Please note that I cannot accept any liability for compliance with any safety regulations applicable to you or generally required for the machine and its components. Compliance with such safety regulations is the responsibility of the end user. German law shall exclusively apply to all contracts, to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG). Place of jurisdiction is agreed to be Mannheim.

Condition: new, Year of construction: 2026, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Pedpfxscnxmzs Aalepl Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Podexpm Evjpfx Aalopl Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Offered is a used feed hopper with pre-screening. Manufacturer: Haver & Boecker. Podpjv N H Hdsfx Aalopl Year of manufacture: 1995. Type: UF 1200x3650. Very good condition, fully functional.

Condition: used, Year of construction: 2004, functionality: fully functional, total width: 3,010 mm, total length: 3,600 mm, total height: 2,800 mm, input voltage: 20 V, compressed air connection: 8 bar, For sale is a PPS Dietle bar-handle automatic machine (GS2 series), suitable for applications in fitting and handle production. This unit comes from industrial use and is offered as a used machine. Ideal for manufacturers of furniture handles/fittings seeking an automated solution for bar/handle components. Ppodpsx Sdylofx Aalol