Used Feed Roller for sale (18,496)

Condition: used, Spindle with carriage of 150 cm and feed by 2 rollers Note: Saw not working, the support bed is missing (see photo) Ijdsz Ahc Aepfx Ah Eetl

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Adjustable centering rollers. As infeed for resaw / multirip saw etc. Iodjnqzuyepfx Ah Estl

Condition: as good as new (ex-display), Solid feed for commercial use with reinforced stand parts made of machine cast iron. Technical data: Isdjvrvxzjpfx Ah Eetl Number of feed rollers 4, dimensions of feed rollers 120x60 mm, speeds 8 (4 forward, 4 backward) 4/8/10/20 m/min, motor output S1 1 HP 400 V, weight approx. 75 kg

Condition: used, Control system for Zehnder Sommer roller feed, built into a sturdy housing Isdpfxsxwk Ahj Ah Ejtl

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Iedpfxozza A Ss Ah Eotl Technical data: - Speed: 18,000 rpm - Power: 2,000 W

Condition: excellent (used), Feed rollers for Isdpfeic T R Rex Ah Eetl DOIN 605 VUIN 605 DK 14 and other spare parts and accessories

Condition: used, Second-hand 4-roller feed unit with stand from HOLZ-HER, model ETZ, for feeding workpieces in woodworking. The machine is suitable for continuous feeding in various woodworking applications. Iedpfx Ahszymtzj Ejtl Includes new rubber rollers. Technical data: - Feed speed: 2–30 m/min

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation Itedpex U Eiasfx Ah Esl - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm Ijdpeu Ic Ewefx Ah Eetl number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Price per unit Internal item number: 2026012602 Features: Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Itjdpfx Aheydfuys Eel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers.

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) Itjdpfx Ahjydfugo Eel The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins.

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 Iedpfx Ahohlnzks Estl - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons

Condition: used, 4-roll feed unit Manufacturer: Steff Technical data - Feed rate: 6.5 - 33 m/min Itjdpfx Aozuz N Hoh Eel Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, TECHNICAL SPECIFICATIONS: - length 5600 mm - width 600 mm - pneumatic clamping force - height from base 1160 mm +/- 50 mm Ijdpszwn Eaefx Ah Ejtl Dimensions - 600x90x160

Condition: used, Technical specifications: Itjdpfx Ahozikpfj Eel Number of rollers: 3 Number of speeds: 4 Motor power: 0.75 kW Feed speeds: 3-23 m/min Roller size: 120x50 mm Power supply: 380 V

Condition: used, Technical details: Roll lenght: 1200 mm roll diameter: 95 mm total power requirement: 1,5 kW weight of the machine ca.: 2,0 t dimensions L x W x H: 4,3x1,5x0,45 m 2 roller conveyor available - construction type: stable angle iron construction - rolls are driven via motor (380V; 2,15A mit 1400 U/min) - rolls are adjustable - conveyor belt size: 4100x1200mm * Itodpfx Ahsu Nkv Tj Esl

Condition: like new (used), Tool spindle Planer shaft Milling spindle Ijdpfsqxtglox Ah Eetl spare parts for GF planer

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available Ijdpfx Ajdl E Iijh Eotl -Weight: 137 kg

Condition: good (used), Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available Iedpfscgan Ijx Ah Eetl -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Condition: used, A set of spacer rings with a 10 mm keyway for use on various woodworking machines, in particular planers. Itedszryl Iepfx Ah Ejl Technical data: - Thicknesses: 40, 40, 20, 20, 10, 10, 5 mm - Bore: 35 mm - Flight circle: 50 mm

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 110502, input voltage: 230 V, metric thread diameter (max.): 63 mm, metric thread diameter (min.): 16 mm, Albert Roller Threading Machine 380011 Identical to REMS Magnum Compact, high-performance machine for threading, cutting, deburring, nipple cutting, and rolling grooves. For installation work, metalworking, and industrial applications. Pipe threads from 1/2" to 4" Metric threads from 16 mm to 63 mm Includes 1x universal automatic cutting head 1/16" - 2" and 1x universal automatic cutting head 1/2" - 4" each with 6 cutting dies The cutting dies (1/2" - 4") are used but in very good condition. Itedpfx Aez Ah R Hsh Eol The cutting dies (1/16" - 2") have been renewed during inspection. Includes 2 x 5-liter cans of Roller's Rubinol 2000 cutting oil. The machine can be inspected and tested at our location in 09120 Chemnitz.

Condition: used, Set of 9 Iedpfx Ahezryzvs Eetl Newly rubberised or as good as new Technical data: - d = 30 mm - D = approx. 125 mm - B = 50 mm - Groove = 8 mm

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Ijdpfx Aheq Nga Ue Eetl Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: new, Roller diameter: 140 mm Itodsyucufepfx Ah Ejl Roller width: 50 mm Bore diameter: 35 mm Keyway: 10 mm Price per piece: 37 EUR

Year of construction: 2004, condition: refurbished (used), Precision feed system for strips up to approximately 100 mm wide and 2 mm thick. Feed force: 400 N. Repeatability: +/- 0.04 mm. Itsdpfeg Iiuxsx Ah Eol