Universal machining center

MATEC MATEC-30HV

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors Pedpexg D Atofx Ahyjpr - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Podpsx E Ahzofx Ahyspr Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: Ppjdpox D Ix Tofx Ahysr High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm Ppodpsw Intaefx Ahysr --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Ppodpfx Ajdpak Rohyjr Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Probe changer

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Psdpfx Aheuyk N Ijyepr

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 II was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 II vertical machining centre. Contact us for more information. Podpfxsx U Dtwj Ahyopr • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Dimensions Machine Depth 4050 mm

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, arm reach: 1,300 mm, The perfect package for your welding automation with the very latest UR10e robot series - please do not buy any more CB series. Would you like to automate your welding shop with a cobot to master your future challenges? Then the OH-au2mate Cobot Welding Solutions with Lorch power source is just right for you! The perfectly coordinated package combines - high-quality robot technology from the cobot market leader Universal - innovative welding technology from Lorch - intuitive operating software Pedpfx Ahet S U Aueyepr Exact contents of the package: UR10e robot welding machine, operating elements, torch holder, Translas 8XR extraction torch, Lorch S5 power source with 400A.

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 motorized grinding spindles (liquid-cooled, purge air / oil mist lubrication) including REFU HF frequency converter, e.g. for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for powering motor spindles Ppjdpfel Tn Afsx Ahyjr GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as is – manufacturing year approx. 1992 A collection of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request All technical data subject to error or omission. We sell exclusively to countries within the European Community.

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz Ppsdpfx Aohlnzkehyjr - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.