Used Matec 30 Hv for sale (35)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 36,111 h, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: LE 430 CA, overall weight: 16,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Matec 30 HV CNC was manufactured in 1997. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful 10 kW drive and a tool changer with 36 magazine positions. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV CNC vertical machining centre we have for sale. Contact us for further details. • Axes travel and speeds Hnsdpfsyzq A Sjx Ai Nok • X-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Y-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Z-axis; rapid traverse: 30 m/min; feed rate: up to 30,000 mm/min • Spindle • Drive power (100% duty cycle): 10 kW from 2000 rpm; torque 48 Nm up to 2000 rpm; approx. 6 Nm at 15,000 rpm (M = P*9550/n) • Drive power (25% duty cycle): 15 kW from 2000 rpm; torque 72 Nm up to 2000 rpm; approx. 10 Nm at 15,000 rpm (M = P*9550/n) • Coolant: Internal coolant 20 bar • Head: Swivel head with 1° indexing increments • Tooling • Tool changer: 36 positions • Max. tool diameter: 130 mm • Work area and clamping • Max. workpiece length for double-sided end machining: X = 3500 mm − 2 × max. tool length • Clamping surface: X = 4500 mm (clamping plate length) • Y = 650 mm; 7 T-slots, 125 mm spacing • Electrical connection: Total connected load 42 kVA

Condition: used, Year of construction: 2004, x-travel 3.000 mm Hnsdpfexx A Ncjx Ai Nek y-travel 1.000 mm z-travel 1.000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm Hedpfxoyrqvlo Ai Nsnk • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h • Control: Rexroth IndraMotion MTX Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Hnedpfjx D Dy Hjx Ai Nek Additional equipment • Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. Machine Benefits Qualitative Machine Benefits • 5-axis cnc machining center with traveling column, rotary table, and swivel head Technical Machine Benefits • Full 5-axis capabilities for complex part geometries • A manual 3-jaw chuck rota s plus 800 from schunk is installed on the rotary table. • There is no hardware runtime counter on the machine. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Hnodpfxjx D Ix To Ai Nok Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, number of axes: 5, This 3-axis Matec 30 HV was manufactured in 2013. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine includes a maximum clamping weight of 1200 kg and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV vertical machining centre we have for sale. Contact us for further details. • Z travel H: 800 mm • Z travel V: 700 mm Hsdpfx Aoymm Exji Nonk • Interference circle diameter: 950 mm • Max. clamping weight: 1200 kg • Tool positions: 48

Condition: excellent (used), Year of construction: 2013, 5-axis machining center (BAZ) Control: Heidenhain Hedpfxsyaba De Ai Njnk Travel paths: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Max. clamping weight (rotary table): 1200 kg Max. spindle speed: 18,000 rpm

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0897, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 21,600 W, Matec 30 HV/S CNC Machining Center (2006) Heidenhain CNC Controller, Samsys+ Multi-3000 Barstock Loader Coolant Reclaim System, and Chip AugerMatec 30 HV/S CNC Machining Center Heidenhain Control 5-axis Spindle speed up to 18,000 RPM, spindle motor power 29 HP (21.6 kW) Hnjdpfxox Ap Hve Ai Nok tool capacity 24 tools, travel 30 x 20 x 20 inches (762 x 508 x 508 mm) includes SamSYS feeder Under maintenance parts missing Sublocation - Building 6

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2012 Control : Siemens 840 D Speed : 12000 rpm Movement X/Y/Z : 1300/600/800 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Siemens 840 D Traverse X/Y/Z:1,300/600/800 mm Spindle speed:12,000 rpm Spindle: Technology:Direct drive spindle Speed:12,000 rpm Power:30 kW Torque:191 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 105° Hedpfxjyiwwqe Ai Nenk Clamping torque:4,200 Nm NC rotary table: C-axis:360 ° Drive:Direct drive (torque) Clamping surface:630 mm Torque:600 Nm Max. table load:1,000 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:48 Tool diameter max.:70 (130) mm Tool length max.:340 mm Equipment: Position sensors:Direct scales Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 40 bar Workpiece measurement:Renishaw Touch probe Tool measurement:Blum Laser Emulsion mist separator:LTA, electrostatic

Year of construction: 2014, condition: like new (used), Matec 30 HVK Working range X 1300 (1500) mm Working range Y 600 (800) mm Working range Z vert. 675 (975) / hor. 800 (1100 at Y=800) mm distance spindle nose / table vert. 0-675 (975) / hor. 175-975 (1275) mm Hnodjl D Nc Tepfx Ai Njk Working spindle - DIN 69871 (HSK 63A) 15.000 rpm drive power 16 (30) kw at 40% ED Torque max. 100 (190) Nm at 40% ED rapid traverse 30 (48/100 with linear drive) m / min. Machine weight 15 tons Control Siemens

Condition: excellent (used), Year of construction: 2016, operating hours: 8,737 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Matec 30HV 3000x800x800 mm NC swing head +/- 105° swiveling Heidenhain TNC640 Handwheel Motor spindle 15,000 rpm / 30 kW / 198 Nm Tool holder HSK 63A 48 tool pockets ICS (internal coolant supply) 40 bar Belt filter system 450 liters Air through spindle Oil mist extraction (left and right) Partition wall for pendulum operation Side loading door Hnsdpfx Aeyaa Sfoi Njk Prepared for additional NC axis 3D triggering probe Renishaw RMP60 Tool breakage control (laser) Clamping hydraulics 100 bar / 10 l/min 2 x clamping circuits, clamping, releasing, manual and via M-function Robot interface The machine has very low operating hours and has always been perfectly maintained. The complete (maintenance) history is known to us. Tools and vices can be taken over if required.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 21,990 h, functionality: fully functional, machine/vehicle number: 0903, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain iTNC530, Equipment: chip conveyor, rotational speed infinitely variable, Travel: 3000 x 800 x 1100 mm (X-Y-Z) Heidenhain iTNC530 control Handwheel 48 tools in the chain Motor spindle: 12,000 rpm / 30 kW / 198 Nm Tool holder HSK63 Direct measuring systems on all axes ICS 20 bar with band filter system, capacity 450 liters Mounted NC rotary table for H/V, diameter 500 mm 3D measuring probe Renishaw Hsdpfoyqx N Dox Ai Nsnk Tool setting probe Renishaw New motor spindle, new X-axis ball screw, geometry aligned, completely serviced.

Condition: good (used), Year of construction: 2009, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,300 mm, Equipment: chip conveyor, Good conditions, millturn function with spindle head. Hnodpfoyl S Ntsx Ai Njk

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: VDI 40, number of slots in tool magazine: 36, Additional equipment: 4th axis IKZ (internal coolant supply) with 40 bar Swivel head with 1° increment 3D wireless probe Hnodex Sv A Sepfx Ai Nok

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Hjdsxn Ikdspfx Ai Nenk Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Rota S Plus 800 chuck by Schunk. The operating hours counter is defective.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Hnjdpfx Aiexg D Atj Nok Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical Hjdpfx Aiexg Dhce Nenk - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Hedpey Aw Rxjfx Ai Nenk Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2006, X 1000 mm , Y 600 mm Parts shown by hand not come. Hnodpeu Dmy Dsfx Ai Njk

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Hsdpsu Dm U Iefx Ai Njnk Layout of machine shown on pictures.

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Parts shown by hand not come. Chucks on the table are not included. Machine vices not come. Hnodpfx Aiomnp D Is Nok

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, controller model: HEIDENHAIN iTNC 530, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK 50 Spindle speed: 20 – 9,000 rpm Torque: max. 165 Nm Table load capacity: 3,000 kg Workpiece weight: max. 800 kg MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Hnjdpoyvudvjfx Ai Njk Main drive: 60 kW Machine weight: approx. 24 t

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: BOSCH, controller model: OSA3, number of axes: 4, This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information. Machine Benefits Technical Machine Benefits Hnodpfx Aox Tkaboi Njk • Internal coolant supply Extra Information Machine still under power

Condition: good (used), Year of construction: 2012, Matec 30 L, year of manufacture 2012, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-tool magazine, full enclosure of working area, direct measuring systems, chip conveyor, bellows with steel laminations, 3D probe, laser measuring system. Hnjdjyhcm Ujpfx Ai Njk

Condition: good (used), Year of construction: 2021, Matec HV 700, Year of manufacture: 2021, Heidenhain TNC 640 control system, X/Y/Z travel 2600/700/950 mm horizontal, X/Y/Z travel 2600/700/950 mm vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, ICS 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electronic handwheel, Dynamics package, Hnsdpsyctf Dsfx Ai Nek Software Kinematics Option, Measuring probe, Partition wall, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours,