Used Manual Polishing Machine for sale (72,602)

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Chsdpfjyxxy Hex Ai Noa

Condition: new, sheet thickness: 1.8upper roll diameter: 70messurements (LxWxH): 1650 x 700 x 1160prebending: 1.5motor: 1,1sheet length: 1050 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending Chedpfx Aod Ab T Rsi Nja - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation We have many references!

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Cedpfx Ajyw Rhmoi Njha Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, TECHNICAL DETAILS - Palletizer in the loader frame - Liquid paste gun POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3400 x 1680 [mm] - Machine height : 2200 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Siemens - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Air extractor : WESCO EcoCell Chodpjv Rgw Ssfx Ai Nja

Condition: used, TECHNICAL DETAILS - number of stations : 6 (4 polishing, 1 grinding wheel, 1 cleaning) - driving plate diameter : 200 [mm] Cjdpfx Aeug U Ewji Nsha - dimensions : 1200 x 900 x 1800 [mm] - weight : 420 [kg]

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cjdpfx Aiei Ezq De Njha Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: new, Brand new machine No. 1 available for immediate delivery!! “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Codpfx Aefibfgei Neha Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Chodpfx Aiowiv Dke Nea Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Year of construction: 2006, condition: excellent (used), Manual packaging machine. Chjdpfxjiz S Ifo Ai Nsa

Condition: used, Technical details: wheel diameter: 780 mm table height above floor: 800 mm Table dimensions: 890x190 mm grinding table: inclination: neigbar Grad total power requirement: ca. 2,0 kW weight of the machine ca.: 0,2 t space requirements of the machine approx.: L:1,2xB:1,05xH:1,3 m Double Disc Grinding Machine Chedpfeu Ng Rtox Ai Noa - Its based on a molding machine body foundation as a whole. - application range: metal, wood, plastic - ginding disc surface diameter:680mm - grinding disc material: sand paper - sucction noozle: 80x120mm *

Condition: used, Technical details: grinding table: inclination: nein Grad voltage: 220 V machine weight approx.: 44 kg space requirements of the machine approx.: 0,3 x 0,45 x 1,1 m Disc right: Ø 150mm x W: 50mm; disc fitted with emery burrs Chsdpju Ng Sqsfx Ai Nea Disk left: Ø 125mm x W: 50mm; disk equipped with emery burrs support on both sides Machine mounted on stand with base plate. Operation via on/off switch *

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Chedey Ud Dpopfx Ai Noa Overall dimensions mm 3100 x 1750 x 1650 h Weight kg 1200

Condition: used, functionality: fully functional, Polishing wheel Polishing disc diameter: 300 mm Width: 40 mm Chedpfx Aiozccxaj Nsa

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Chsdpfxsdzqn Ds Ai Noa Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed Chjdpfxewdnb Rj Ai Nea - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us!

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Chjdoc Rfg Uspfx Ai Nsa Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Made in Germany Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high-pressure nozzles, 5.5 kW motors, Csdpfx Ash Ug Ulji Neha control cabinet.

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, V-belt drive, polishing hood Chedpjgxugajfx Ai Noa polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm polishing wheel width: max. 150 mm suction connection: mØ 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7.5 kW, IP54

Condition: used, Year of construction: 2012, machine/vehicle number: RPM 1000 D, Used robots - polishing machines P 1000 D Type: P1000 Cedexludxspfx Ai Noha Right-hand version Polishing discs Ø 1000 mm

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1 polishing machine for robotic machining sold. Design: 1 x left-hand version Manufacturer: SHL Polishing disc diameter: 1000 mm Drive power: 7.5 kW Includes: Chedpfx Ajd S R Agji Nsa Exhaust flap

Year of construction: 2016, condition: new, machine/vehicle number: 16-PMME-01, A single-sided polishing machine for manual operation, used for polishing parts made of aluminum, steel, stainless steel, brass, and zinc die-cast, is for sale. Technical data: Codpfx Aiec Rwnge Neha Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Height to polishing shaft: 1,100 mm Extraction port: Ø 100 mm Dimensions (L x W x H): 600 x 600 x 1,500 mm Weight: approx. 150 kg Connection voltage: 3 x 400 V Connection power: 4 kW Made in Germany Warranty: 12 months Optional: An extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control; 1 main switch.

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width Codpfx Aiegxughs Neha with 4 kW drive power, V-belt drive, polishing hood Technical data: Polishing wheel: max. Ø 500 mm spindle diameter: 35 mm polishing wheel width: max. 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Chjdpfed Dt D Iox Ai Nsa Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Two units are available.

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, infeed, polishing hood. Codpfx Aijgxugto Nsha Technical data: Polishing wheel: max. Ø 500 mm spindle diameter: 35 mm polishing wheel width: max. 100 mm infeed: 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm Weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. If you have any further questions, please feel free to contact us! Cjdpfx Aexxv D Hoi Nsha