Used Polishing Table for sale (18,141)

Condition: used, - engine (hp): 1/1.9 - engine (rpm): 710/1420 Rsdpfx Adem R Iljajn - Motor (V): 380 - Motor (A): 3.7/3.8

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Redpfxolccvme Adajn Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. Rsdpow Au A Eofx Adasn + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), Rodpfxow Avpte Adajn with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Rodpfjvuk Uiox Adaen

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Rsdevkt N Uspfx Adajn Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Rodpexvwcxsfx Adaen Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Redpfstpgxiex Adaon Height: 80 cm (height is adjustable) Diamter: 120 cm

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Redpfsfvqmxox Adaon Hydraulic

Condition: used, Outfeed table before resaw IDL000793 Redoul Rgvepfx Adaen

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Redpju Smq Sefx Adaen - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Redpfxjtddw Ae Adaon Hydraulic lift, lifting capacity around 1 ton.

Condition: new, Year of construction: 2024, functionality: fully functional, Automatic Polishing Machine Sanyi SY-T200 year 2024 Redpfowcftbex Adaon The SY-T200 is a closed internal circulation sandblasting machine designed for the surface treatment of hard alloy tool workpieces. It operates using a negative pressure jet blasting method, where compressed air draws in abrasive material to efficiently process surfaces. The machine features an independent dust extraction and filtration system that minimizes dust pollution and allows abrasive reuse, ensuring cost-effectiveness and environmental protection. Its structure includes a working chamber, rotating worktable, spray gun group with lifting mechanism, dust removal system, and electrical control unit.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 800 mm, total width: 1,900 mm, total height: 850 mm, Work Table AT 1900 with Stainless Steel Top Baker’s Work Table Redpfxoygdaaj Adaen Stainless steel worktop with rear upstand Reinforced, welded construction Lower storage shelf Stainless steel design Dimensions approx.: 1900 x 800 x 850 mm (W x D x H) Used unit, cleaned Visit us – we have many more tables in stock!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 800 mm, total width: 1,880 mm, total height: 930 mm, Work Table AT 1880 with stainless steel top, mobile Bakery work table Stainless steel worktop with rear gallery Reinforced, welded construction Lower storage rack Rsdpfxsygc U Ns Adaen Full stainless steel design, mobile Dimensions approx.: 1880 x 800 x 930 mm (W x D x H) Used machine, cleaned We have more tables in stock!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 110 kg, total length: 800 mm, total width: 3,500 mm, total height: 850 mm, Work Table AT 3500 with Beech Wood Top Stainless Steel Work Table AT 3500 with beech wood worktop and rear gallery 3 x stainless steel flour carts for 100 kg each, with center storage grid Drawer unit on the right Dimensions: 3500 x 800 x 850 mm (WxDxH) Rjdpfxjygcxuj Adajn Used device, cleaned Top surface sanded We have many more work tables in stock!

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! Rjdpfjv Sfkaox Adasn 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: used, cutting length (max.): 3,000 mm, cutting width (max.): 1,250 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,000 mm, total length: 3,200 mm, total width: 2,000 mm, total height: 1,800 mm, main saw diameter: 400 mm, overall weight: 1,200 kg, slide length: 3,000 mm, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, power: 5.5 kW (7.48 HP), space requirement length: 3,200 mm, space requirement width: 2,000 mm, space requirement height: 1,800 mm, sliding table length: 3,000 mm, Equipment: scorer, No. 04518 Sliding table saw Martin T 60 CLASSIC Used, only 130 operating hours Motor power main saw 5.5 kW Sliding table 3000 mm long Rodjygav Ropfx Adasn Saw blade size 250 - 400 mm diameter Cutting height maximum 130 mm Saw blade tilt motorized 0° - 46° Saw blade change with quick clamping system SprintLock Speeds 4000 / 4800 / 6000 rpm Speeds are determined by the position of the V-belt 2-axis scoring unit pneumatically controlled (Please note: On the video the scorer is not connected to compressed air, therefore you cannot see any height adjustment, but the function is given) Cutting width approx. 1250 mm Control PowerPC Operation via touchscreen Control for cutting height, cutting angle, scoring unit Digital display for cutting height, cutting angle, cutting width Suction connection 120 mm diameter at the bottom, 80 mm diameter at the top of the protective hood Cross table 1300 x 650 mm LW Edging ruler with 2 stops, extendable up to 3200 mm, swivels according to scale Protective hood arm can be swiveled away Complete technical documentation available Including various equipment and tools Transport dimensions approx. 3200 x 2000 x 1800 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Redpfxjxta Dys Adaen

Condition: used, Year of construction: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut Easy 222 Year of manufacture: 2016 CNC control Rodsyf Euispfx Adajn Usable cutting/table area: 1,000 x 600 mm Maximum cutting height: 20 mm Static vacuum table with 1-zone fixing High-performance vacuum turbine with 4 kW power Servo drive for X, Y, and Z axes Safety device with light barrier monitoring and emergency stop switch 1 high-intensity projector Vacuum power: 4 kW Power rating: 6.5 kW 380 volts, 3 phases, 50 Hz Compressed air: 6 bar, 200 l/min (when using pneumatic tool attachments) 9 bar, 400 l/min Machine dimensions: 1,600 x 1,235 x 2,190 mm Weight: 440 kg 30126

Condition: excellent (used), 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Redpfxsyftzke Adaen The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Redpeyfp N Rsfx Adaon

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table Rodewuybkspfx Adajn -Rotary table: clamping surface: Ø 120 mm -Groove width: 14 mm -Dimensions: 210/160/H140 mm -Weight: 5.7 kg

Condition: used, Year of construction: 2004, total length: 3,200 mm, total width: 2,150 mm, total height: 2,050 mm, - Year: 2004 - Documentation available: No - CE certificate present: No Redpfx Asyfn A Aedaen - Serial number: 04-03-2 - Main motor power [kW]: 7.5 - Roller table length [mm]: 3000 - Table width [mm]: 1450 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 115 - Voltage [V]: 400 - Current consumption [A]: 15.5 - Power [kW]: 7.5 - Transport dimensions: 3200mm x 2150mm x 2050mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, total length: 2,800 mm, total width: 1,700 mm, total height: 1,550 mm, Weight: 950 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No Rsdpeyfd Rvjfx Adaon - Serial number: 96-03-537 - Main motor power [kW]: 4.0 - Roller table length [mm]: 2800 - Table width [mm]: 1600 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 75 - Manually adjustable axes: Cutting height, Tiltable - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Transport dimensions: 2800mm x 1700mm x 1550mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels