Used Manual Folding Machine for sale (102,073)

Condition: excellent (used), Year of construction: 2001, Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour 4xHohner 48/5 stitching heads Dcsdpfxor Ti Nbj Af Ijn Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives

Condition: good (used), Year of construction: 2005, machine/vehicle number: 49664, Folding machine GUK FA 36/4 AS, machine number 49664, year of manufacture 2005, 4 pockets, speed controller, friction feeder, noise reduction cover, counter, delivery unit, in good condition, immediately available. If you are interested, we can also provide information on other machines in our inventory. Djdpfexby Hqex Af Iocn Isbr Sfsu Tqfyezb Rjig You are warmly invited to inspect the machine at our premises by prior appointment.

Condition: used, 3-Roller Ring Bending Machine with Hand Crank Drive Manual Section Bending Machine KNUTH Type HRB 30 M Year of manufacture: approx. 1995 Shaft diameter: Ø 30 mm Top roller diameter: Ø 98 mm Bottom roller diameter: Ø 116 mm Drive rollers: 2 units Djdjxbtxtopfx Af Ijcn Performance data with standard roller set: Square steel (at Ø 150 mm): up to 18 x 18 mm Round steel (at Ø 180mm): up to Ø 18 mm Flat steel, flat (at 150 mm): up to 50 x 8 mm Flat steel, edgewise (at Ø200 mm): up to 30 x 10 mm T-section: up to 20 x 20 mm - Driven by hand crank - Millimeter scale for pressure roller adjustment - Standard roller set with 80 mm roller width - Top roller with wire groove, bottom rollers 2-piece Machine dimensions L x W x H: 750 x 330 x 1450 mm Weight: 160 kg In good condition

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)! Dcjdpfxjxbtrto Af Ion

Condition: used, Year of construction: 2007, Folding machine MBO T1120/44 Year: 2007 Description: - 8 page folder - MBO Navigator Feeder - Pallet feeder: FP 1120 - Pump Dcjdorcqv Depfx Af Ion Buckle folding unit: 1st - Automatic buckle plate adjustment - First buckle folding section with 4 buckle plates - Perforating shaft - Anti noise hood(s) Buckle folding unit: 2nd - Automatic buckle plate adjustment - Second buckle folding section with 4 buckle plates - Double stream device for second folding section - Perforating shaft - Anti noise hood(s) - Excluding delivery Configuration changed 29-1-2024

Condition: good (used), Year of construction: 2000, functionality: fully functional, Folding machine complete with MBO SAP 46 L delivery (MBO Z 2 mobile blade also available upon request) Dodpfx Aewmwldof Iocn

Year of construction: 1996, condition: excellent (used), machine/vehicle number: L. 09/31, Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V Dcedpfxshpyr Us Af Isn

Condition: good (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 7.2 kW weight 3430 kg range L-W-H 4120 x 2400 x 2090 mm Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives Dcodexbh Eujpfx Af Ion * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2005, Folding machine MBO T 800.1 6-6-4, year of construction 2005, pallet feeder, Navigator control, Dcjdpfx Afsukrrke Ijn 1st folding unit 78/6 VN , 6 buckle plates, upstream and downstream slitter shaft, 1 gate fold buckle plate for 1st or 2nd unit, gluing device HHS prepared, 2nd folding unit 78/6 VN , 6 buckles, upstream and downstream slitter shaft, 3. folding unit 56/4 RFE , 4 buckles, sheet return, noise reduction device, compressor, 4th MBO SBAP 72 ME, mobile standing sheet delivery, built in 2005, press rollers immediately available If you are interested, we will be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: used, Year of construction: 2012, Horizon AFC-544AKT (2012) Used ▪Specifications Dcsdpfx Aoxawa Sjf Ion Sheet Size: Max. W538 x L750 mm Min. W128 x L148 mm Sheet Weight Range: 30 to 210 gsm Buckle Fold Length: 1st Station 1st Buckle: 30 to 450 mm 2nd / 3rd / 4th Buckle: 30 to 360 mm K1 / K2 Buckle: 30 to 150 mm Belt Speed: 50 to 230 m (164 to 754 ft) / min. Voltage / Frequency: 3-Phase 200 V, 50 / 60 Hz -Paper Feed Capacity Maximum height: 650 mm Maximum weight: 250 kg -Production Speed A4 fold: 35,000 sheets/hour

Condition: used, functionality: fully functional, Year of construction: 1999, machine/vehicle number: 3677, control type: manual, degree of automation: manual, actuation type: mechanical, Equipment: emergency stop, foot remote control, For sale is a HERA / MAT folding bending machine SML 3000 x 4, year of manufacture 1999. The machine is in working condition and ready for immediate use. Technical data (according to nameplate): Dcsdpfx Afoxcw Tqs Ien Manufacturer: MAT Maschinenbau GmbH (HERA) Model: SML 3000 x 4 Year: 1999 Bending length: 3020 mm Max. sheet thickness: 4 mm (at 450 N/mm²) Motor power: 4 kW / 5.5 kW Operating voltage: 400 V Control voltage: 230 / 24 V Frequency: 50 Hz Fuse protection: 50 A Noise level: < 70 dB(A) Weight: approx. 5,400 kg Equipment & features: Control: Siemens OP7 operator panel Foot pedal operation Includes bending bar Without gooseneck tooling Robust construction, proven HERA quality Machine CE certified Condition: Used, normal signs of wear according to age (see photos) Fully functional, ready for immediate use Inspection under power by appointment possible

Condition: excellent (used), Year of construction: 2007, MBO K 800.2/6 SKTL AUT with pallet feeder and ASP 66 ME delivery included Parallel break with automated pocket (6 pieces) and roller adjustment MBO slitter shaft cassette Cross and triple fold with pneumatic knife control + pocket is fully automated (can be rotated 180° in a few simple steps) Dcedperwzmwofx Af Ion Sword folding unit with rotating three-fold knife LEFT and RIGHT plus Parallel buckle plate in the RIGHT and LEFT knife folding unit The main computer including touch-screen display was renewed in 2022!

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 99051725, Format (cm): 35x45 Equipment / Additional information: Pockets: 2 Fold types: spiral fold, zigzag fold, double parallel fold, single fold Underfloor suction feeder: 30 000 bph Friction feeder: 20,000 sheets / h with parallel fold A4, 80 g / m2 Paper weight: 40 - 250 g / m2 with simple parallel fold Electrical connection values: Mains voltage: 230V Djdpfsh Eva Hex Af Iecn Current consumption: max.IOA

Condition: good (used), Year of construction: 1996, sheet width 2000 mm plate thickness 2 mm distance between columns 2100 mm total power requirement 6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,7x1,2x1,1 m Voltage 380V belt width max. 2000 mm sheet thickness 2 mm Dimensions (LxWxH) approx. 2700x1200x1100 mm Dcodpfx Afsul Egdj Ien

Condition: good (used), Year of construction: 1999, sheet width 2040 mm plate thickness 3 mm daylight upper clamping 350 mm bending angle max. 0-135 ° adjustment of lower and bend clamping 80 mm control Fastimatic M200 power requirement 2,2/1,5 kW weight of the machine ca. 2460 kg dimensions of the machine ca. 3,2 x 2,8 x 2,1 m Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 Djdpfx Asvgnm Hef Ijcn N / mm². Inox less due to its greater strength. Little used machine, very good condition - original colour! Please notice that the price of a new CNC-machine in this dimension with back gauge is about 65000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° Dsdpfoum Ttzsx Af Iocn All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2014, Offer consisting of: Heidelberg Stahlfolder KH78/82 with pallet feeder PFH82, built in 2014, including SBP-66 vertical sheet delivery, 4 pockets, 2 swords, horizontal pocket. Dcjdpfov Htx Uex Af Isn

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: compressor, Machine complete with MBO SAP 46 L delivery (Z 2 mobile blade also available) Dcedewmv Udopfx Af Ion

Year of construction: 2002, condition: excellent (used), machine/vehicle number: 020151003, FOLDING MACHINE MULTIPLI 35 WITH STAND Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Dcsdpsiqpb Esfx Af Ion Folding arts: Letter fold, zigzag fold, double parallel, single fold

Condition: good (used), Year of construction: 1982, sheet width 2000 mm plate thickness 2 mm distance between columns 2080 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t Dcedpfxow N S Eij Af Isn dimensions of the machine ca. 3,0 x 1,2 x 1,5 m Hydraulic swivel bending machine - max. dimensions of the sheet to be bent: 2000 x 2 [mm] - Power of the electric motor: 2,2 kW - Bending angle: 0 - 180 degrees

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Dsdjxcpd Ujpfx Af Iecn Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. The machine is powered and can be tested. Please contact us to arrange a viewing.

Condition: good (used), Year of construction: 2006, 1 set of electrical parts for K800.2 (Navigator control) Dcsdpsxclu Asfx Af Ijn

Condition: good (used), Year of construction: 2006, This is a well-maintained folding machine from 2006 for sale, 6 pockets 2 swords. Available from 12/24 Dedpfx Afsu Ah Dbe Ijcn

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 27830/85, (PACKAGE INSERT FOR DRUGS) Paper size range (cm) : max. 36x52 A3+ // min. 8x10 Pockets: 4 Knives: 1 Dcsdperigrpsfx Af Ijn Station: TS36/4J Feeder: FT36J Folding unit: KB36

Condition: good (used), Year of construction: 2013, For sale is a high-performance, fully automated Heidelberg Stahlfolder KH78 folding machine, year of manufacture 2013, equipped with a PFH82 pallet feeder and a TSH70 stream delivery unit (year 2010). Ideally suited for high production volumes with short setup times and high folding precision. Djdjwy Dvpjpfx Af Iocn — Technical Specifications – Stahlfolder KH78 (Combination Folding Machine) • Folding principle: Combination folding (buckle folder + knife folder) • Working width: 78 cm • Machine speed: up to 230 m/min • Buckle folding unit: 4 fold plates + cross-folding device • Knife folding unit (cross fold): Automated (with knife shafts) • Max. sheet size: 780 x 1200 mm • Min. sheet size: approx. 140 x 180 mm • Paper weight: approx. 40 – 250 gsm • Control: Automated setup (MCT = Modular Control Technology) • Memory function: Job recall feature • Drive type: Servo-driven • Folding types: Roll fold, zigzag fold, parallel fold, cross fold, and many more.