Used Manometer for sale (217)

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Ibjdpezhadcsfx Acleb Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Operating manual available Maintenance documents available EC declaration of conformity available Application areas Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion testing unit Operating manual Ijdpfx Aszg U Tijclsbb EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve Ibodpfsb Uyizjx Aclsb 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation.

Condition: excellent (used), For sale: Professional vacuum lifter EXpressO Balance Greifer, manufactured in Germany. The device is designed for lifting and transporting flat elements using vacuum technology. The unit is equipped with a PIAB system and four suction cups, ensuring stable and secure gripping of materials. Ideal for industrial applications such as handling glass panes, sheet metal, panels, and other flat components. Technical Specifications Manufacturer: EXpressO Deutschland GmbH Model: Balance Greifer Load capacity: 20 kg Year of manufacture: 2012 Ibjdpfjyvd Upsx Acljb Article number: 060BLV114110 Vacuum system: PIAB Number of suction cups: 4 Connections: G1 2 Vacuum manometer Condition The device is in very good technical condition Visible normal signs of use Complete as shown in the photos Applications glass and window handling sheet metal and panel transport warehouses and production production lines Included in the set complete vacuum lifter control handle pneumatic installation

Condition: used, maximum load weight: 34,070 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 05/2027, loading space volume: 92 m³, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Vehicle The semi-trailer is based on a self-supporting chassis made of high-quality S700 steel. The frame runs from the support legs to the rear. Kingpin: 2 inches, mounted on an approx. 10 mm thick fifth-wheel plate St 52-3. Fifth wheel plates for max. fifth-wheel load: 15,000 kg. Axles 3 x 9 t Knapen HD axles, fixed, with disc brakes approx. 430 mm, 10-bolt ET 120. Standard control console with manometers and controls for the air suspension, position: left, in front of the axles. 1st axle as a lift axle, fully automatic via EBS, incl. starting aid (3x brakes). Wireless remote control. Tires and Rims 6 x steel rims. 6 x tires 385/65 R22.5. Components Steel support legs with tiltable base, maximum support load: 50 t, maximum lifting load: 24 t. 6 x semi-round fenders. Anti-spray mats mounted behind the 3rd axle. Standard lighting panel + cover flap. Rear end cross member. A fixed mud flap is attached under the bumper. Bumper according to R58-03. Height approx. 375 mm, ground clearance approx. 450 mm. Plastic toolbox with hinge at the bottom, dimensions approx. 1,000 x 500 x 500 mm, position: left, behind the axles. Aluminum side guards in open design, foldable according to EC regulations. A long ladder, mounted behind the side guard or under the semi-trailer. A retractable ladder with platform for easy access, mounted at the rear of the semi-trailer. 2 wheel chocks, position: 2x left. Broom and shovel holder, mounted on the right in front of the axles. Floor CARGOFLOOR CF 500 SL-C system. The CARGOFLOOR system is equipped with an E-Control. Smooth aluminum floor planks, approx. 10 mm, 21 planks. The floor planks are equipped with aluminum end caps. A stainless steel plate on the rear below the floor for additional wear protection. Front Wall The largest platform on the market is mounted on the front wall. 2 ladders on the front wall, position: left and right. A door is installed in the front wall to allow easy access at the front of the semi-trailer, position: left - opening outwards. Sliding Bulkhead To ensure complete unloading, the semi-trailer is equipped with a sliding bulkhead made of aluminum, a brush to prevent contamination of the guide rails. Ground clearance approx. 100 mm. Isdpfxezkx H Ie Acljbb Side Walls Extra strong top edge profile with rails for the sliding bulkhead. Top edge profile with groove for the bead-edge fastening of the tarpaulin. The side walls consist of an approx. 3 mm inner side and an approx. 2 mm outer side. The side walls are continuously welded over the entire height (inner side) for maximum strength and minimal contamination. Welding is carried out by a high-quality and fully automatic welding process. Incl. side protection tarpaulin, left side. Rear The rear doors are fully welded from wall and frame profiles for additional strength. The doors are equipped with a pneumatic safety latch for safety during unloading. Through-loading height with closed top rail at the rear approx. 2,665 mm. Individual stainless steel locking rod per rear door, heavy-duty design. Top Rail Top rail made of steel, with wedge. Roof Bows 4 pieces of round roof bows, with a diameter of approx. 60.3 mm, position: 1 & 3 & 5 & 7. The roof bow space is divided into 3 compartments of each approx. 4,100 mm. Roof Covering Extra strong roll-up tarp.

Condition: excellent (used), Here we offer a Despatch laboratory oven. Despatch laboratory oven + 8” WAFER Iedpfezdr Ekjx Acljbb LCC: Maximum temperature 260 °C Lockable disconnect switch – turn off the control panel for easy maintenance Protocol 3 controller with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel interior with continuously welded interior seams on the insulation side to protect the working area from contamination Programmable door interlock prevents the operator from opening the oven door while the cycle is running The door interlock switch turns off the heating when the door is opened The recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic manometer monitors the pressure drop of the HEPA filter, so you know when the filter needs to be replaced Electric door release for ergonomic operation UL & C-UL listed control panel opens Modbus communication connection (RS485) for remote monitoring and recording Chamber dimension L 350 mm Chamber dimension W 350 mm Chamber dimension H 350 mm maximum temperature 260°C Digital display Yes Electrical connection 230 V Overall dimension L 830 mm Overall dimension W 910 mm Overall dimension H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension Ibsdpfxozibdte Aclsb • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Isdpfx Acezibc Aslsbb Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Year of construction: 2024, 110-ton electro-hydraulic press Made in Italy Ibedpfxefh R N De Acljb The P110 MR is equipped with: Immersed motor power unit, 400 V, 50-60 Hz. Rapid approach and return pump, calibrated to 20 bar. Adjustable pressure pump with handwheel for achieving the required power. Maximum pressure valve with mechanical lock to prevent overpressure. Manometer (standard) that allows for extremely precise calibration of the delivered power. The P110 MR is the only hydraulic press composed of 2 columns in a monolithic structure made of FE 510 steel, laser-cut without welding in the areas of greatest stress. This feature gives it exceptional robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Maximum pressure: 350 bar Maximum capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Inner width between columns: 1004 mm Rapid stroke advance: 1,400 mm/min Slow stroke advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Maximum absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Condition: excellent (used), Liebisch Constamatic S1000M-TR Corrosion Testing System Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: S1000M-TR (4BVL) Made in Germany Corrosion testing system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Test chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range, test chamber: ambient temperature to 50 °C Temperature range, humidifier: ambient temperature to 70 °C Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test methods DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature control for test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Test specimen holders and test rods Reservoir for test solution Large insulated hinged lid with gas springs Condition Used equipment from industrial application. Optical condition according to the images. Interior with visible deposits and color changes due to test media. Control unit is active, the device can be switched on. A complete technical functional test under real test conditions was not carried out by us. Ibsdpfozcdyxex Acleb Inspection possible by arrangement. Scope of delivery: see images. Loading can be arranged. All information is provided to the best of our knowledge based on nameplates, manufacturer's markings and available information. Subject to errors and changes.

Condition: new, Year of construction: 2026, neu 2026 060216 Iedpfx Aswiqtysclobb prompt, Zwischenverkauf v Türkei 20700 € 397.44 € 1 Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Ibedpfx Aszhd Nieclsb Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Ibodpfx Acju Nz S Eeljb Pressure reducer with adjustable double connection *

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately). Iodpfx Aezcxbwoclobb

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer Ibsdpfx Acjx Suzasleb * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, maximum load weight: 33,620 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,800 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5669 Approx. 48m³ Benalu Tipper Semi-Trailer with Swing Tailgate and Smooth Sidewalls / Also available for rent with purchase option ---- * Manufacturer: Benalu * Model: Agriliner FL 8800 * First registration: 09/2025 * Gross weight: 39,000 kg * Unladen weight (as per registration): 5,380 kg * Payload: 33,620 kg * Axles: 3 x Jost with 1st axle as lift axle and traction aid * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R 22.5 on Speedline satin-finished aluminium rims * EBS Wabco * Colour: Chassis RAL 9006, tipper body RAL 9006, tarpaulin grey * Main inspection (TÜV): 09/2026 * Capacity: approx. 48m³ (8.80m long x 2.41m wide x 2.20m high) * Swing tailgate * Central grain discharge chute * Individual wheel arches * Aluminium landing legs (full load) * Folding underrun protection * Automatic lowering when tipping * Load manometer * LED work lights * Grain funnel with dust bag * Rolling tarpaulin with tension straps * Internal access at front left of semi-trailer * Water tank * Operator platform at front with left-hand access * 3.5m aluminium access ladder at front right under chassis * 1 owner Iodpfsy Hn Naex Aclobb German vehicle!! German documents!! Rental with purchase option possible!! Notice regarding possible errors in this listing: Despite careful preparation of this advertisement, errors in the text or specifications may occur. We do not accept liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify additional questions.

Condition: new, mileage: 500 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, Mercedes Benz Arocs 5 3740B 8x4 EURO6 GSR with Stetter AM10 FHC Basic Line GSR – Turn Assist, Lane Departure Warning, Emergency Brake Assist, Reversing Camera, etc. First registration: unregistered Year of manufacture: 2025 Mileage: 500 km Colour: Arctic white Available in your desired colour for an additional charge *SEE PHOTO Technical Data * 290 kW * 394 hp * Front tires: 315/80R22.5 * Rear tires: 315/80R22.5 * Gross vehicle weight: 37,000 kg * Mileage: 500 km * Emission class: Euro 6E * Year of manufacture: 2025 * Transmission: automatic, Mercedes Benz Powershift 3 * Condition: new vehicle Chassis Equipment – M Cab Classic Space * Wheelbase: 5,150 mm * Engine: Euro 6E * Front axle: straight design, 8 t * Rear axle: planetary, 13.4 t * Fuel tank: 390 L aluminum and 25 L AdBlue * Sun visor * Air conditioning * Comfort cab suspension * Disc brakes, front and rear * ABS and ASR * Aluminum air tanks * Roof hatch * Comfort driver's seat with premium upholstery * Construction rear lamps * Cruise control * LED daytime running lights * LED fog lamps * Pre-installation for: toll system, roof-mounted headlamps and rotating beacons * Multimedia Cockpit, interactive with navigation system * FMS Fleet Management System interface * Reversing camera * Refrigerator * Lane Keep Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 Isdpfxowuxwqs Aclebb * Frontguard Assist Body Equipment * Stetter AM 10 FHC * Nominal volume: 10 m³ ready-mix concrete * PMP gearbox * 650 L compressed air water tank * Smooth aluminum rear axle mudguards * Folding underrun protection * Manual mixer controls * Emergency stop switch * 2 plastic chute extensions with holder and protective brackets * Water meter * 750 mm steel fold-out section * LED work lights * Mudguard extensions * 5 m concrete flow pipe adapter * Consistency manometer Non-binding offer, ex works Cologne. Subject to prior sale and errors. Sale to businesses only. We speak German - We speak English -

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Ibodpfx Acoyw Thvslsb Location: Rieth

Condition: used, Year of construction: 1992, Vacuum tumbler Germo KT 2000 (2000L) Equipped with a loading system Iodpfx Ajzb Exgjclebb For sale is a ready-to-use industrial vacuum tumbler Germo (Type: KT 2000) with a drum volume of approximately 2000 liters. Ideal for meat processing plants for efficient processing and marinating. Key data & details: Manufacturer/Type: Germo KT 2000 Capacity: approx. 2000 liters Material: High-quality stainless steel (rustproof) Equipment: Integrated vacuum system with manometer, analog-digital control panel, emergency stop switch, CEE plug Advantages: Rapid brine absorption under vacuum, robust construction, easy cleaning Condition & sale: Inspection: Possible by appointment at the location.

Condition: new, Shot blasting booth Manufacturer: STK Model: PK-690L Condition: New machine Accessories: - Interior lighting Ijdpfxe R Thte Aclebb - Dust extraction system with filter - Pressure reducing valve with manometer - Pair of gloves - Blasting gun with nozzle - Foot switch - Operating manual

Condition: used, mileage: 1 km, first registration: 11/2025, fuel type: diesel, color: white, gearing type: automatic, Year of construction: 2025, Equipment: all wheel drive, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ KRÜGER Hose Dumper on HINOWA Track Chassis (Diesel) - TOP Demo Unit High-pressure hose reel – 200 m DN25 Designed for 200 m DN25 rubber hose (high-pressure hose included) * hydraulically driven * stepless speed adjustment of the flushing hose * manual freewheel * automatic hose guidance system using a cross-lead spindle * double roller window 1” * high-pressure water manometer * Hydraulics Operation – Hydraulic hand levers Support shield up/down * Flushing hose up/down * Flushing hose speed slow/fast Hydraulic equipment Control valves Chassis – Carrier vehicle Manufacturer: Hinowa / Type: Track chassis HS701Standard – White Ijdjxc Szvspfx Aclobb For further detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our general terms and conditions and with the exclusion of any warranty.

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Width: 1500 mm Ibjdevcqlwopfx Aclob Height: 1500 mm Position: horizontal Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Ijdpjxbqrqjfx Acljbb Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Year of construction: 2001, condition: used, Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated. Individual sale conceivable. Additional title: year of construction 2000/2001 Gross content: 1122 l Perm. working overpressure: 3 bar Perm. working temperature: 20 °C Content cooling zone: 5 l Length: 1000 mm Width: 1000 mm Height: 1700 mm Material: stainless steel Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet Ibjdew Td Epopfx Aclob

Condition: used, mileage: 10 km, first registration: 12/2024, color: orange, Your specialist dealer with expertise, service, and advice offers you: SCHMAILZL gully cleaner for Multicar, other vehicle manufacturers, and trailers (the attachment is offered without vehicle) Net price: €14,550 plus 19% VAT. (New device with 12-month manufacturer’s warranty) Base unit type SKR II - Painted in RAL 2011, including: - Adjustable frame (1.2–2.0 m wide) with lifting and emptying device - Swivel device with cylinder and chain suspension for manhole covers - Lifting winch (lifting capacity approx. 150 kg) - Hydraulic vibrator – cover lifter - Wind protection – fastening materials - Net weight approx. 300 kg The very simple operation and ergonomic working process make this affordable device, in combination with a tipper vehicle, a genuine alternative to conventional methods. Additional advantages: - Low fuel consumption as operation is almost at idle speed - Mounting and dismounting take only a few minutes, important for changing assignments - Emptying 150–300 silt boxes per day is possible - Emptying without water addition thanks to hydraulic vibrator - The unit can be installed on various vehicles using the telescopic frame The following requirements must be met by the carrier vehicle: - Hydraulic connection 20–30 L/min, 150 bar - Free return line, size 15 - Lashing eyes on the tipper platform Optional equipment for vehicles or trailers without their own hydraulic drive: Petrol hydraulic unit consisting of: Petrol engine 9 HP/6.7 kW, 20 L/min at 2400 rpm, 8.4 cm³/rev gear pump, manometer, 40-liter tank with oil level indicator and damping mount Dimensions: approx. H 80 x W 65 x D 55 cm, weight: approx. 70 kg Net price: €4,350 plus 19% VAT. Assembly, shipping, or delivery available on request. Iedevvp Rxepfx Acljbb On request, we are happy to offer complete packages with vehicles, also available in right-hand drive versions. We also gladly provide an offer for the installation or retrofit of your vehicle with the demountable tipper body including a DEKRA main inspection report for the conversion. Errors, changes, and prior sale reserved. Our Terms and Conditions apply. Take advantage of our many years of experience in sales and service and let us prepare an individual offer for you. Make use of our leasing and financing options as well. We promise competent advice and support from our qualified staff. You will find further offers from the commercial vehicle manufacturers MULTICAR, ISUZU, and PIAGGIO as well as an extensive range of attachments at Tel.: