Used Manometer for sale (169)

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT Rjdpfx Aewlrv Usdasn • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: new, functionality: fully functional, machine/vehicle number: FDM-150E/3000, operating speed: 7 mm/s, reverse speed: 9 mm/s, overall weight: 10,000 kg, total length: 2,750 mm, total width: 800 mm, total height: 3,100 mm, pressing force: 150 t, Equipment: documentation/manual, safety light barrier, HYDRAULIC PRESS FOR FOLDING. The double-column hydraulic press FDM-150E/3.000 belongs to the F series and is specially designed for folding operations. It utilizes an optimized hydraulic system with a pressure of 295 Bar, ensuring prolonged durability and reliability. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Features a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Includes upper and lower machined tables made from C45E steel with DIN-650 grooves. The upper table ensures perfect alignment with four cylindrical side guides of 80 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings. • Lower grooved table measuring 3.100 mm x 600 mm. CYLINDER AND HYDRAULIC GROUP • Two double-acting main cylinders with chromed pistons and maintenance-free anti-wear guides. • Single-speed motorized hydraulic group. Includes cylinder decompression valve. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 7” HMI touchscreen mod. KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and holding time. It has storage capacity for 300 recipes, where all the previous values can be programmed. • Operation is performed via a low-voltage electric pedal. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector. TECHNICAL SPECIFICATIONS Power tn 150 Redpfowpg D Uox Adaen Engine Power cv 11 Piston Stroke mm 250 Working Speed mm/s 7 Return Speed mm/s 9 Maximum Pressure Bar 295 Front Light mm 3.200 Side Light mm 500 Useful Vertical Light (Free Distance Between Tables) mm 550 Working Height mm 950 Total Front mm 2.750 Total Side mm 800 Total Height mm 3.100 Weight kg 10.000

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-600E/NC, pressing force: 600 t, table width: 990 mm, table length: 890 mm, operating speed: 5 mm/s, overall weight: 23,000 kg, reverse speed: 18 mm/s, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Rsdpfxewpggio Adajn Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: like new (used), functionality: fully functional, machine/vehicle number: MV-300E/NC, total height: 3,500 mm, total width: 1,800 mm, total length: 2,300 mm, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Rsdpjwphhnefx Adaon Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: new, Blasting cabinet Make: STK Model: PK-690L Condition: New machine Accessories: - Interior lighting - Suction with filtering Rodpo R Thtofx Adaen - Pressure reducing valve with manometer - Pair of gloves - Blasting gun with nozzle - foot switch - Instruction manual

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Used multiprocess MIG/MAG welding machine EWM Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Rodpfxewgy Eyo Adaon Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A Price Euro 7.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2023, functionality: fully functional, Used multiprocess MIG/MAG welding machine Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Rsdpfx Aowktz Aodaen Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A We have 2 identical complete pieces available in stock. Price Euro 6.000 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2005, condition: excellent (used), functionality: fully functional, empty load weight: 63 kg, maximum load weight: 300 kg, machine/vehicle number: 2441, Mobile tank, entirely made of stainless steel, Eurocont brand, year of manufacture 2005, impeccable technical and optical condition, gaskets in excellent condition, Series: 2441, weight 63 kg, operating pressure allowed: 1 bar; tested pressure 1.7 bar; negative operating pressure allowed: -0.15 bar, maximum operating temperature allowed + 130°C, this tank can work under pressure if a manometer is installed. Mobile stainless steel tank for various food and non-food liquids. volume 300 liters, diameter 800 mm, height 1,140 mm. The tank is on four rollers with blockers. It has 3 upper loading sockets: 100 DN with valve, 50DN and 20DN socket and lower DN 100 discharge/empty socket with closing lever and threaded cap. Sales price: 2.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Redpfx Ajtctmxjdaon Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan Redpfx Aow Ewafjdasn - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: new, Year of construction: 2021, We sell 6 units new pneumatic dispenser in stainless steel inox electro-polished, volume 18 kg, made in Italiy by GMC, model 402E, complete ready to use with : 1 manual high pressure spraygun with adjustable flow, brand Wagner Air, model Colora SP5, 08 mm 1 universal nozzle 1 manometer 1 hose 4 meter lenght 4 system are with high pressure spray gun 2 system have no high pressure spray gun The price for the system with high pressure spray gun is Euro 750 The price for the system without high pressure spray gun is Euro 650 The price for the whole package of 6 units can be: Euro 3.600 Rjdpotu Enqsfx Adaon Price 750 Euro + VAT, negotiable, FCA and packed Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: excellent (used), functionality: fully functional, Schenk plate filter L: 1600 mm Redswn D Arjpfx Adasn B: 650 mm H: 900 mm Plates: 40x40 Rack length for 60 plates. Mobile version with steering column and wheels. New Bourdon tube manometer equipped with 39 plastic filter plates and 2 plastic end plates. Product valve connections.

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Rjdpfjkhmgiox Adaon Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Workshop press with 60 tons maximum pressing force. With electric motor and additional manual control. Therefore also ideally suited for fine work. Versions (net prices): Ausführungen 30t 60t 100t 150t 200t > 200t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 60 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 60 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) A demonstration machine can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Lp3ew8c Redpfxef Sqcro Adaon Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: new, Workshop press 100 tons with electric motor and additional manual operation Versions: Rsdpjf Sqcyofx Adajn 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 100 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 100 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer in which we inform you about our general terms and conditions and the right of withdrawal.

Condition: new, mileage: 500 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, Mercedes Benz Arocs 5 3740B 8x4 EURO6 GSR with Stetter AM10 FHC Basic Line GSR – Turn Assist, Lane Departure Warning, Emergency Brake Assist, Reversing Camera, etc. First registration: unregistered Year of manufacture: 2025 Mileage: 500 km Colour: Arctic white Available in your desired colour for an additional charge *SEE PHOTO Technical Data * 290 kW * 394 hp * Front tires: 315/80R22.5 * Rear tires: 315/80R22.5 * Gross vehicle weight: 37,000 kg * Mileage: 500 km * Emission class: Euro 6E * Year of manufacture: 2025 * Transmission: automatic, Mercedes Benz Powershift 3 * Condition: new vehicle Chassis Equipment – M Cab Classic Space * Wheelbase: 5,150 mm * Engine: Euro 6E * Front axle: straight design, 8 t * Rear axle: planetary, 13.4 t * Fuel tank: 390 L aluminum and 25 L AdBlue * Sun visor * Air conditioning * Comfort cab suspension * Disc brakes, front and rear * ABS and ASR * Aluminum air tanks * Roof hatch * Comfort driver's seat with premium upholstery * Construction rear lamps * Cruise control * LED daytime running lights * LED fog lamps * Pre-installation for: toll system, roof-mounted headlamps and rotating beacons * Multimedia Cockpit, interactive with navigation system * FMS Fleet Management System interface * Reversing camera * Refrigerator * Lane Keep Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist Body Equipment Rodpfx Adewuxwqeasn * Stetter AM 10 FHC * Nominal volume: 10 m³ ready-mix concrete * PMP gearbox * 650 L compressed air water tank * Smooth aluminum rear axle mudguards * Folding underrun protection * Manual mixer controls * Emergency stop switch * 2 plastic chute extensions with holder and protective brackets * Water meter * 750 mm steel fold-out section * LED work lights * Mudguard extensions * 5 m concrete flow pipe adapter * Consistency manometer Non-binding offer, ex works Cologne. Subject to prior sale and errors. Sale to businesses only. We speak German - We speak English -

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer Rjdperai N Ajfx Adaon - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- Redpef Sqckefx Adasn The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing Rsdpoddv Itofx Adasn -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Year of construction: 2000, condition: new, 3x supply system for mechanical seals / pressure tank Manufacturer: Fluiten Material: Stainless steel (1.4301) Year of manufacture: 2000 Volume: 12L Pressure (max.): 16 bar Temperature (max.): 99 °C Height: 430 mm (without manometer) Rjdpsd Tqz Tefx Adaon Diameter: 219 mm Incl. thermometer, manometer and sight glass Condition: new and unused, partly original packed Connections: see drawing The tank can be visited after arrangement at any time gladly in 76694 Forst.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester Rjdpfsyc Up Djx Adaen -Manufacturer: Elektron, Manometer: 0-60 MPa / 0-600 bar, unused, original packaging -Size: Ø 100 mm -Number: 11x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.7 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester Rjdpfxeyc Ulfo Adaon -Manufacturer: Elektron, Manometer: -100-0 kPa / -1-0 bar, unused, original packaging -Size: Ø 100 mm -Number: 18x pressure gauges available -Price: per piece -Cardboard dimensions: 135/110/H50 mm -Weight: 0.5 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, pressure gauge with glycerin filling, unused, original packaging -Type: RKG 63-1,r 0-16 bar G1/4 A -Number: 7x pressure gauges available -Price: per piece -Cardboard dimensions: 95/95/H75 mm Rsdpfx Adeyc Slpsasn -Weight: 0.3 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge, unused, original packaging -Type: 111.10.100 25 bar G1/2A -Item No.: 9021850 Redsyc Sdxopfx Adajn -Number: 14x pressure gauges available -Price: per piece -Cardboard dimensions: 145/105/H45 mm -Weight: 0.2 kg

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology Rodpfx Adjiraxqjasn -Manufacturer: Wika, pressure gauge -Type: 0 to 160 bar -Screw connection: see photos -Dimension: 105/45/H145 mm -Weight: 0.8 kg

Condition: used, Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, capsule spring pressure gauge, unused original packaging Redpfx Adeirax Roajn -Type: 0 to 4 bar -Screw connection: see photos -Number: 9x manometer available -Price per piece -Dimension: 110/85/H110 mm -Weight: 0.8 kg/pcs