Used Manometer for sale (217)

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Ijdpfx Asztya Uop Hobb Operating pressure: 0,9 bar Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Ibedpfx Apjv T Aqyo Hsb Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm²

Year of construction: 2005, condition: excellent (used), functionality: fully functional, empty load weight: 63 kg, maximum load weight: 300 kg, machine/vehicle number: 2441, Mobile tank, entirely made of stainless steel, Eurocont brand, year of manufacture 2005, impeccable technical and optical condition, gaskets in excellent condition, Series: 2441, weight 63 kg, operating pressure allowed: 1 bar; tested pressure 1.7 bar; negative operating pressure allowed: -0.15 bar, maximum operating temperature allowed + 130°C, this tank can work under pressure if a manometer is installed. Ibodpfx Apjtctmxs Heb Mobile stainless steel tank for various food and non-food liquids. volume 300 liters, diameter 800 mm, height 1,140 mm. The tank is on four rollers with blockers. It has 3 upper loading sockets: 100 DN with valve, 50DN and 20DN socket and lower DN 100 discharge/empty socket with closing lever and threaded cap. Sales price: 2.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Ibedpfxezuz Hfe Ap Hsb Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Year of construction: 2001, condition: used, Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated. Individual sale conceivable. Additional title: year of construction 2000/2001 Gross content: 1122 l Perm. working overpressure: 3 bar Perm. working temperature: 20 °C Iedpsw Td Epefx Ap Hebb Content cooling zone: 5 l Length: 1000 mm Width: 1000 mm Height: 1700 mm Material: stainless steel Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Condition: used, 60 to stroke 400 mm dayligth 900 mm 825 mm 295 mm Heads 150x95 mm feed up 5,6 mm/sec feed down 9,4 mm/sec Ibjdpfx Aeyv Nm Sep Hob total power requirement 4 kW weight of the machine ca. 700 kg Overall size 1460x850x2400 mm Further information: stable welded construction Printing cylinder adjustable Operation electrically via shift lever / manually via hand lever Pressure display by manometer Height of material supports adjustable by cylinder CE mark

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas Ibedpfeylng Uox Ap Hjb • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm Iedeu Nz S Eepfx Ap Hsbb capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection *

Condition: used, Combi filter (kieselgur- and sterilising filter) for beer filtration with hydraulic pressure, 100 x 100 cm filter plates and external risers. Additional title: combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Ibsdpjvcqlwjfx Ap Heb Length: 7000 mm Width: 1500 mm Height: 1500 mm Position: horizontal Base construction: mounted on steel frame, standing on feet Features: 31 kieselguhr layers (32 frames), 50 sterilisation layers, 4 pressure manometers (10bar), 6 lanterns, risers, kieselguhr discharge screw (Allweiler), gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet Kieselgur filter, outlet 3 x turbidity measurement (inlet, outlet kieselgur filter, outlet sterilisation filter). Spare parts: 295 sealing rings for filter plates, 3 kieselguhr filter support plates

Condition: used, Year of construction: 1984, Technical details: Iedpju Nv Ubsfx Ap Hobb drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 traction force: min: 10 kN weight: 389 kg dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm - without rope!!!! *

Condition: as good as new (ex-display), Year of construction: 2025, pressing force: 15 t, Hidralmac single-column press – 15 t – assembly press – manual combination press Isdpjfhcc Isfx Ap Hobb A compact hydraulic single-column combination press from the manufacturer Hidralmac with a pressing force of 15 t is for sale. The machine is designed as a manual special-purpose solution and is particularly suitable for flexible assembly, straightening and pressing work in workshops and service environments. The worktop can be swivelled out to the left. The lower base plate can be inserted at 3 different heights. The press ram can be lowered manually via the rotary handle. Special features of this press: The operator can build up pressure very precisely from 0 to 1.5 t. This is very important, for example, when pressing in ball bearings. We have sold this type of press on numerous occasions to the aerospace industry. In this sector, precise and careful work is essential. Once the press has been precisely positioned, pressure of up to 15 tonnes can be built up using the hand pump. ##### Technical data + information: Assembly and disassembly press – 15 T – 270 × 600 mm ==== General specifications - Type: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Pressing force: 0–15 T - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Hole in table: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (WxDxH): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel frame - Table: swivelling - Under-table: height-adjustable (3 positions) ==== Hydraulic cylinder - Piston stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via hand lever and hand pump - Fine adjustment: 0–1.5 t via rotary knob - Hand pump: 0.5 l - Pressure gauge: manometer ==== Control - Operation: manual via hand lever and rotary knob - Pressure control: mechanically adjustable with fine sensitivity ==== Safety - Anti-rotation device - Sturdy frame construction ##### Applications: Pressing in, pressing out, assembly, disassembly, straightening work, bearing technology, workshop work, maintenance, precision assembly, service operations, small-batch production Hydraulic press, hydraulic press, assembly press, disassembly press, workshop press, 15-tonne press, 15-tonne press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, press-fitting press, bearing press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a bespoke quote. Our hydraulic presses are manufactured in accordance with German Machinery Directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply in all respects with the Brazilian national safety directive NR 12, which is based on these standards. Our key strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses are predominantly fitted with components from leading European manufacturers.

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Worldwide delivery/Dealer inquiries welcome! Internal number: #650 The images are example images. Actual equipment and color may vary. STS V-2.0 Tank * Tank with a capacity of 2,000 liters * Tank hot-dip galvanized * Tank slightly tilted to the rear for easier cleaning * Lateral flushing opening in the tank to remove contaminants or blockages without opening the tank lid * Tank lid opens completely to the passenger side and is secured with hook screws * 2 safety levels installed as standard to prevent damage to the compressor * Siphon separator – overflow with 2 balls and sight glass * Manometer on suction line with protective bracket * Mechanical level indicator with color scale Engine and Compressor * Vacuum compressor MEC 3000 with 3,500 liters of air output * Vacuum max. -0.8 bar (continuous operation at -0.5 bar) Ibedszi Ir Rspfx Ap Hjb * Overpressure max. 0.49 bar * Maintenance-free V-belt drive for vacuum compressor * Honda industrial engine GX 390 – electric starter, oil sensor, control panel with ignition lock, battery and tank * Internal intake hose to avoid protection within the engine unit * Muffler for vacuum compressor with oil collection * Heat-conducting sheet made of stainless steel above the exhaust * 1 liter of biodegradable compressor oil stored in an oil bottle holder * 5-liter gasoline canister in a holder * Standard funnel with long neck for changing and refilling engine oil * All engine components and accessories are housed in a lockable engine box * Engine box made of aluminum and powder-coated in the desired color Chassis * Self-supporting chassis, completely hot-dip galvanized * Low-loader tandem chassis 3.5t * Track width identical to passenger cars and Sprinters for optimal driving * Lowest possible center of gravity of the suction tank * 2 axles with 1,750 kg load capacity each and independent wheel suspension from a well-known manufacturer * Continuous welded V-drawbar * Sturdy fenders with metal lamp housings * Rung holders for quick securing of the suction hoses using rubber bands * Storage option for tools and accessories Suction tank * Overrun brake with return mechanism * Automatically locking ball coupling * Support wheel reinforced * 13-pin cable connection Connections and Hoses * 2 suction hoses (3") 5m long with Perrot couplings * 1 suction lance 3" (1500mm long) * 1 Perrot connection (3") at the bottom in the tank lid * 1 Perrot connection (3") on the side on the right in the direction of travel For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: used, Year of construction: 2001, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 32191 l Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 3850 mm Height: approx. 4420 mm Material: stainless steel 1.4301 Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: 1 cooling jacket (154 l, 2 bar, glycol), outlet DN65, manhole, safety valve, CIP pipe with spray head, manometer, ladder bar, sampling, temperatur sensor (PT100), crane eyelets Ibsdpoztyanofx Ap Hsb Periphery: own temperature control

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop Isdjzibdtepfx Ap Hjbb • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: good (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 16 bar -Screw connection: see photos -Number: 2x manometer available -Price per piece -Dimension: 100/100/H195 mm Ibjdpfx Asiraygep Hob -Weight: 2,1kg/pcs

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter Ibjdpforai N Aox Ap Hjb - Control cabinet

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Ibedpjpbvqvjfx Ap Hob Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, manometer -Type: 0 to 10 bar -Screw connection: see photos -Dimension: 100/50/H140 mm Ibjdpfx Apeir A Rzj Hjb -Weight: 1,2 kg

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece Ibedoqbr Sujpfx Ap Heb - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar, but not a Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High-pressure pump: Falch xs31.1-30-500, 30 l/min at 500 bar (year of manufacture 01/08) - Motor: Electric, 30 kW - 1250 l water tank - Manometer - Pressure regulator - Safety valve - Steel frame, powder-coated - Covers made of aluminum - Forklift pockets and crane eyelets - Dimensions with 1250 l water tank: approx. 1,100 x 1,760 x 1,770 - Unladen weight: 1,085 kg - Year of manufacture: 2013 - Operating hours: approx. 1500 h Condition: High-pressure pump overhauled in 06/2022. In very good used condition. Ibsdeg Tm N Aopfx Ap Hsb

Condition: good (used), Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Display: 0-16 bar -Standard: EN 837-1 -Number: 3x manometers available -Price: per piece -Dimension box: 200/200/H60 mm Ibedpofx Auhefx Ap Hsb -Weight: 2.1 kg

Condition: new, Robust band saw for steel and stainless steel. Double-bevel cuts, up to 60° to the right and up to 45° to the left. 2 speeds: 35 and 70 m/min. Manual lifting of the saw frame, assisted by tension springs. Downward movement is achieved by gravity, dampened by an oil damper with an adjustable throttle valve. Cutting capacity examples: Round: 90°: 235 mm -45°: 165 mm +45°: 185 mm +60°: 115 mm Rectangular: 90°: 280 x 180 mm -45°: 185 x 80 mm +45°: 185 x 100 mm Isdpfx Apeztu R Ij Hsbb +60°: 115 x 80 mm With: Cooling system Vise with quick-release mechanism Mechanical material stop Manometer for saw blade tension Mechanical saw brush - Also available in the ARG 260 Plus version (cutting capacity for round stock: 260 mm) – available from stock!

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Ibsdozhd Niopfx Ap Hjb Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: new, Year of construction: 2026, machine/vehicle number: -, functionality: fully functional, pressing force: 40 t, Portal Straightening Press – Manufacturer Hidrobrasil – 40 t Gantry Press – Table 635 × 555 mm For sale is a portal straightening press by Hidrobrasil, offering a pressing force of 40 t. This machine is based on a proven design, can be newly manufactured at short notice, and individually customized. It is ideal for straightening, assembly, pressing-in, and pushing-out operations. ==== Ibodpfx Asyia D Rsp Hob Technical Data & Information: Portal Straightening Press Hidrobrasil – 40 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry / Frame Press - Pressing force: 40 t - Machine weight: approx. 1,500 kg - Dimensions (W × D × H): 1,880 × 900 × 2,300 mm ==== Working Area - Max. opening width: 500 mm - Table-to-floor distance: 1,200 mm - Column spacing: 900 mm ==== Table System - Table size: 635 × 555 mm - Table thickness: 70 mm - Versions: open, closed, or with T-slots (optional) ==== Hydraulic Cylinder - Stroke: 550 mm - Cylinder diameter: Ø 150 mm - Piston rod: Ø 90 mm - Operating pressure: max. 280 bar ==== Hydraulics - Pump: ASC - Flow rate: 12 l/min - Motor power: 4 kW - Return speed: 16 mm/s - Idle speed: 10 mm/s - Oil tank capacity: 120 l - Hydraulic block / valves: Hydropack - Pressure gauge: manometer - Pressure adjustment: adjustable - Pressure switch: included - Power unit: side-mounted ==== Operation - Hand lever operation - Sensitive speed control - Pressure setting via rotary knob ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 5 kW ==== Control Cabinet - Protection class: IP54 - Reserve space: approx. 30 % - Operating mode selector switch: lockable - Components: Siemens, Allen-Bradley, Sick ==== Equipment and Features - Integrated tool holder in the press ram (up to Ø 250 mm) - Custom table versions available - Construction can be adapted to customer requirements ==== Standards and Documentation - CE documentation - Spare parts lists - Electrical diagrams and parts lists (digital) - Standards: - 2006/42/EC Machinery Directive - 2014/35/EU Low Voltage Directive - 2014/30/EU EMC Directive - EN ISO 16092-1 / -3 - EN 60204-1 - EN ISO 12100 - EN ISO 4413 ==== Straightening, assembly, pressing-in, pushing-out, workshop applications, maintenance, series production Gantry press, straightening press, hydraulic press, workshop press, assembly press, insert press, frame press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Additionally, our presses surpass Canadian and European safety requirements by fully complying with the national Brazilian safety directive NR 12, which builds upon these standards. Our major strengths are custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Iodopvk Diepfx Ap Hobb Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer