Used Linematic Maschine for sale (1,433)

Year of construction: 2024, condition: ready for operation (used), Offered is a continuous dryer/drying system: Drying units: Alraun infrared and hot air tunnel, transport system: Alraun railing belt TB70x300 (model 2233), infrared drying (model IR70x60/250C/2109): IR radiant heat, digital temperature controller A-Senco TR-85, adjustable upper alarm value (uPal) up to 300°C, hot air drying (model WL70x60/150C/480m³/h/2208): convection heat/hot air, air capacity: 480m³/h, temperature range: controlled heat up to approx. 150°C, transport system: Alraun railing belt TB70x300 (model 2233): drive: SEW-EURODRIVE gear motor, control: MOVITRAC®-LT frequency inverter infinitely variable speed control, dimensions X/Y approx. 700mm/3000mm, inspection possible by appointment. Lasdpsyzr Hrsfx Ancea

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 700 h, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, coolant supply: 80 bar, rapid traverse Z-axis: 120 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rotational speed (max.): 25,000 rpm, rotational speed (min.): 1 rpm, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Linear motors The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. Lajdpfx Ansu Im Enecja This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Ljdpfjyxy S Rox Ancjaa Weight: 32 kg Very good condition

Condition: ready for operation (used), Year of construction: 1959, functionality: limited functionality, The two-roll precision rolling machine applies a pressure of 26,000 kg and features a roller core diameter of 125 mm as well as a total roller body length of 200 mm. The effective strip width is 175 mm, within which a uniform distribution is ensured. The commission number is 59024, which allows the manufacturer to retrieve the exact construction drawings. After some time, the machine stops operating. It is suspected that the electrician should take the following into consideration: • Connection type: Three-phase current 380V/400V (3 phases + neutral + earth). • Power socket: Due to the current intensity (22.8 A), a CEE 32A socket (red industrial socket) is required. • Protection: The motor must be protected with slow-blow fuses (e.g., type C circuit breakers or Neozed fuses) to handle the high inrush current. A 32A (three-pole) protection is recommended. Lasdpfx Anoyzh Tbjcoa • Motor protection: A motor protection switch set to the rated current (here 22.8 A) is absolutely necessary to protect the motor from overload. Important note: The specifications (71.5 rpm, 5 Hz) indicate either a very slow-running special motor or a motor operated via a frequency inverter. Commissioning should only be carried out by a qualified electrician.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Lsdeyzc Ruepfx Ancsaa

Year of construction: 2010, condition: excellent (used), I sell the automatic magazine GRUNDNER SONDERMASCHINEN MLD. Storing 82 Positions of Material 2,80 x 2,10m Total size 52 x 11,5 m x h. 2,3 + 1,5m. / Double-Deck Loading / Unloading 2 + 1 Positions. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Security fence system fully complete ! Available immediately. Ready for work, possible to test. Lasdpfxjyzcgis Ancea With CE Certificate and full manuals.

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path Ledpfx Anju Hiq Rscoaa and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Year of construction: 2005, condition: good (used), All parts shown by hand not come. Ledpfx Asd N I Ezonceaa VAT not included in price.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany Lodpjgu Nmhjfx Ancsaa The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Ledpfjg Dvdcox Ancjaa - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Lsdpfjtr U Hljx Ancoaa Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm Lasdsttagdepfx Ancea The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) Lsdpottah Refx Ancsaa → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display Laedpfex Ebzqsx Ancja - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Lsdpfx Anjyw R Ndocjaa Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl - Central coolant system

Condition: used, Year of construction: 2001, Guillotine Shear Laodoyw I A Iepfx Ancja Manufacturer: BBM Model: TS-H25-16 Year of manufacture: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. strokes per minute: 15 Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Main fuse: 63 A Hydraulic connection data: 300 bar Pneumatic connection data: 6 bar Weight approx.: 11 t.

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Lasdpfx Ansxq Hgcjcoa Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: used, width 3.000 mm height 1.900 mm length 800 mm Lasdjlf H Uhspfx Ancja Pneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks.

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2100 mm - 2 decks * Screen opening upperdeck: [] 18 mm. Lodpfxoywmpmj Ancoaa * Screen opening lowerdeck: [] 8 mm. * Driving: 30 kW E-motor * Incl.: springs.

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2300 mm - 3 decks Lajdjywmpgjpfx Ancsa * Driving: 30 kW E-motor * Incl.: springs.

Condition: new, FREY piston filling machine, model Kompakta 2-30. Year of manufacture: 2026. Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning, and twisting of all casing types. Control system and memory for 99 filling programs. Infinitely adjustable filling speed, twisting speed, and pause length. Fill level indicator, piece counter, quantity stop function. Portion addition for first portion. Portioning range: 5 - 10,000 g. Portioning speed: up to 250 portions/min. Fill cylinder capacity approx. 30 liters, solid stainless steel with slide coating. Piston made of high-quality, wear-resistant plastic. Connected load: 3.3 kW, three-phase current 400 Volt, 50 Hz, 3 phases. Optional: LCD3 control with TFT color display, memory for 100 filling programs, table of contents and product name display in the program. This machine is on display at our premises. We are a commercial seller. All prices quoted are net prices plus VAT. Lajdpfxeyyuuvj Ancja

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Ljdpfoyx U N Dsx Ancoaa Please contact us for further information. Price on request!

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Ljdpoyb Hu Nsfx Anceaa Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. Lajdpfxsyb I Aze Ancja ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 2 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 11600/2500/H1030 mm -Weight: 3080 kg Lsdpoyvyxrofx Ancoaa