Palletization

Maschinenbau GmbH

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws made in Germany! Iodpez A Tgdsfx Am Hstl Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Max. cutting height: 175 mm Saw blade diameter: 450 - 550 mm Saw feed: Infinitely variable, from 0 - 80 m/min. Compressed air connection: 1/2", 6 bar Required air volume: approx. 3500 m³/h

Condition: excellent (used), Offer includes: Horizon BQ-470, efficient 4-clamp perfect binder, EVA/hot melt, year of manufacture 2019, counter reading: 430,000 books, ready for demonstration and immediately available. Itedpfx Amezltf Ij Hol

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Ijdpfsz Ag Rrox Am Hstl - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds Itsdpjz Agw Eofx Am Hol - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Iodpsinur Aofx Am Hotl Volume: 1.5m³/min Power: 11kW

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations Iedpfxez Agv Uj Am Hstl - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available. Iodpjzz Rpcjfx Am Hetl

Year of construction: 1988, condition: good (used), Size: max 460 x 310 x 60 mm, min 125 x 100 x 3 mm Book block thickness: max 60 mm, min 3 mm Speed: max 6.000 c/h Equipment: gathering machine • chain tensioner with hand feeding station • 16 stations • machine number 62 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed Itjdpel Dpcwofx Am Hel perfect binder • serial number 58 • 20 clamps • jogging station • resting table • fold pressing station • milling and roughening station • brushing station • hotmelt spine gluing unit • cam controlled • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device standard accessories • pv pressure-vacuum pump • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools optionales Equipment:--not included-- • extending of the gathering machine • modification of the conveyor belts • three knife trimmer • compensating stacker • shrink wrapping • optional equipment • palletizer

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. Iedpfx Aex Aqaqjm Hotl M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Year of construction: 2025, condition: new, Length-cutting unit The machine has a 15 kW electrical connection and can saw logs with diameters up to 85 cm. The saw motor has an 11 kW motor. Dimensions: Iodpfxozxzdfe Am Hetl Overall length: 6.5 m Width: 2 m Height: 3.4 m

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Iedpfxjk Nm Nrs Am Hetl

Condition: new, Year of construction: 2024, Stock items available for immediate delivery consisting of: ᐳ Stop rail, 3 m long ᐳ 2 complete stop units ᐳ 1 measuring scale, right to left ᐳ 1 measuring scale, left to right ᐳ Fastening screws Itjdpofnp Swjfx Am Hsl - The wooden base strip, 50 x 45 mm, onto which the stop rail is screwed, is not included in the scope of delivery.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Isdpfx Amszw T Due Hstl Construction: Welded frame structure Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm Itedpfeu Nhiqsx Am Hol - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: as good as new (ex-display), Year of construction: 2021, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm Isdpfsxazzysx Am Hstl - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates.