Used Lime for sale (307)

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Iedpfxexl A A Ne Afijtn Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: excellent (used), power: 152 kW (206.66 HP), operation weight: 26,500 kg, chain condition: 60 %, Year of construction: 2017, operating hours: 11,388 h, Equipment: air conditioning, CATERPILLAR 326FLN Year: 2017 Operation hours: 11.388 hrs ROPS Radio Side-back- drive camera Airco monoboom stick: 3 meter central lubrication Protective ventilation system all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 80 1x Bucket with 1m width u/c: 60% good trackshoes 600 millimeter width CAT C7.1 engine with 152kW Itsdpfxsw U Nqtj Afisn CE Operation weight: 26,5 to. Transport – 9.3m x 3 x 3.20

Condition: good (used), Bookbinding Shears 1100mm Made in Germany. Itedpfxoxgbdbj Afien Very good condition. Cutting length approx. 1100mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Front cutting stop with millimeter scale. Foot-operated material pressure. Extra-high knives. Weighs over 400kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ECO-DEVNYA-I8, total length: 6,490 mm, total width: 2,000 mm, total height: 6,260 mm, overall weight: 21,500 kg, power: 44 kW (59.82 HP), Equipment: documentation/manual, Hazardous Waste Incineration Plant – Inciner8 I8-1000 Location: Devnya, Bulgaria Manufacturer: Inciner8 International Ltd., United Kingdom Year of manufacture: 2018 Condition: Installed, fully operational, complete documentation and CE certification General Description The Inciner8 I8-1000 is a high-performance system for thermal treatment of hazardous and industrial waste, featuring fully automatic loading, dual-chamber combustion, and an integrated flue-gas cleaning system. Designed for ease of operation, robust construction, and long service life, the unit ensures full compliance with EU Directive 2000/76/EC and the European Industrial Emissions Directive (IED). The system guarantees complete oxidation of waste under controlled temperature and residence time, resulting in non-hazardous ash and emissions meeting EU regulatory limits. Itedpfx Ajxlcw Tsfisn Main Technical Parameters: • Type: Dual-chamber incinerator with secondary afterburner • Model: Inciner8 I8-1000 C/W Eco Flam Burners • Feeding capacity: up to 330 kg per batch (automatically adjusted to waste type) • Combustion temperatures: Primary 800–1100 °C | Secondary ≥ 850 °C (2 s residence time) • Loading system: Hydraulic RAM feeder with automatic door and safety interlocks • Auxiliary fuel: Low-NOx diesel burners (two-stage surface-stabilized combustion) • Operation mode: Underpressure – 2 mbar (ID fan with frequency control) • Heat recovery: Air-cooled heat exchanger for waste-heat utilization (up to 400 °C) Flue-Gas Cleaning System (Pollution Control System – PCS): Three-stage treatment: 1. Heat exchanger – rapid cooling of flue gases below 425 °C 2. Powder dosing unit – hydrated lime/limestone injection for neutralization of acid gases (HCl, SO₂, HF) 3. Ceramic candle filter – final filtration of particulates, heavy metals, and residual compounds Key features: • Ceramic filter candles with automatic reverse-pulse cleaning • Particulate emissions (PM₁₀ / PM₂.₅) < 1 mg/Nm³ • Integrated system preventing de novo dioxin formation by maintaining temperature > 800 °C and removing chlorine compounds Continuous Emission Monitoring System (CEMS): • Measured parameters: O₂, CO, CO₂, NO, NO₂, HCl, HF, TOC, particulates, humidity, pressure, temperature • Ranges: in accordance with EN 14181 (O₂ 0–25%, CO 0–4000 ppm, etc.) • Data management: USB / Internet output, software package included Certification & Compliance: • CE Declarations of Conformity for the complete system and subsystems (autoloader, ID fan, PCS) • Manufacturer ISO quality certification • Complies with EU Directives: 2006/42/EC (Machinery), 2014/35/EU (Low Voltage), 2014/30/EU (EMC) • Emission testing: QUAL 1 Test Report No. 05/24-01-2019 – confirmed compliance with 2000/76/EC Advantages: • Fully automated and safe operation with PLC control • Suitable for hazardous, medical, and industrial waste streams • Minimal residual ash and low OPEX • Heat recovery option for hot-water utilization • The system is ready for dismantling and relocation Delivery terms: EXW Devnya, Bulgaria (Ex Works – pickup from site)

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. Itodpfxjv Uq Tle Afien HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: reconditioned (used), Year of construction: 2003, Complete plant Primary impact mill, 2320x1700 mm. Mobile Production capacity 800 t/h 0-40 mm Limestone Secondary two Laron Lau 8 hammer mills, 1620x700 mm opening. Ijdpfxjlwya Nj Afietn

Condition: like new (used), Year of construction: 2024, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Itedpfx Aowazn Aofisn Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Condition: excellent (used), power: 400 kW (543.85 HP), operation weight: 90,100 kg, chain condition: 80 %, Year of construction: 2018, operating hours: 9,708 h, LIEBHERR R 976 HD Year: 2018 Hours: 9.708 hrs. Monoboom 7,20 Meter Stick 2,90 Meter V-edge Rockbucket with teeth (RESCH-KA-TEC), cutting width 2,15 Meter, capacity 5.2 cbm, condition 70% good Undercarriage with with double-web shoes 600 Millimeter Condition of the u/c: 80% good Liebherr 8 Zylinder V-Dieselengine, kW/HP 400/544 Central lubrication for the machine and for the slewing ring Rear and side camera Protection grill over the cabine Original Painting Iedpfjxhclijx Afistn Full service machine from Liebherr Recent repairs: New hydraulic oil cooler New high-pressure pump New control unit Operation weight 90.100 KG CE/EPA Technical and optical in a very good condition

Condition: used, Year of construction: 1973, saw blade length: 480 mm, overall weight: 1,050 kg, cutting height (max.): 240 mm, Sawing machine, old but very rarely used and therefore in good condition. Double hydraulic clamping of the workpiece—once at the saw blade and once at the feed clamp. This allows for millimeter-precise advancement of the bar. Maximum feed length 750mm. Comes with a new saw blade. Includes 2 hoses for coolant and lubricant. Itodpfxsuan Ufo Afisn

Year of construction: 2015, condition: like new (used), Rational SCC WE 102 steam convection oven, capacity for 10 x GN 2/1 or 20 x GN 1/1 trays, suitable for 150–300 meals. Ideal for canteens, catering services, hotels, larger foodservice operations, schools, etc. With this convection oven you can bake, roast, grill, steam, blanch, and more. Features Slovenian language menu, automatic cleaning with cleaning tablets, and core temperature probe. The chamber is cleaned with water during the cleaning cycle to prevent limescale build-up. Latest model of this convection oven, in excellent condition and well-maintained. Additional Rational convection oven models also available. Itsdpfx Afjxgvmkoijn

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Iedpfx Ajlf Tu Uofistn Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Itedpfswir A Nex Afisn The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Year of construction: 2013, condition: excellent (used), Caracteristică Valoare / descriere Funcție aplicare cant pe borduri / plăci Lungime totală 2 444 mm (≈ 2,44 m) Sistem de alimentare transport pe lanț (“chain conveyor”) Reglaje rapide (“Quick‑Set”) da — pentru adaptarea la grosimea cantului Buncăr / rezervor de adeziv Teflon coated, capacitate 1,2 kg Grosimea cantului suportată ~ 0,4 – 3 mm (pentru cant în rolă) Grosimea plăcii (piesei de lucru) 10 – 45 mm Lățimea minimă piesă ~ 70 mm Lungimea minimă piesă ~ 210 mm Viteza de alimentare ~ 8 m/min Greutate estimată ~ 350 kg Diametrul tubului de aspirare ~ 120 mm Ijdpfxsxga Npo Afijtn

Condition: used, Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, power: 2,400 kW (3,263.09 HP), nominal power: 2,560 kW (3,480.63 HP), rotational speed (min.): 750 rpm, rotational speed (max.): 750 rpm, overall weight: 50,000 kg, total length: 8,000 mm, total width: 2,400 mm, total height: 3,900 mm, 2400KW 50hz 400v 750rpm disponibili 2 unità alimentazione a BIO/FUEL-DIESEL impianto completo di tutto Itodpoxf Utgefx Afien

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 605 mm, total height: 100 mm, total length: 1,470 mm, conveying length: 1,430 mm, construction width: 605 mm, construction height: 100 mm, TAF item number: 1000005533 Manufacturer: SSI Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 1,470 x 605 x 100 Width incl. side panel in mm: 605 Side panel height in mm: 95 Conveyor length in mm: 1,430 Conveyor width in mm: 500 Iedpfx Aoxf Ivzsfijtn Substructure: none Support roller axle type: plugged, rigid axle Support roller diameter in mm: 50 Support rollers per axle: 1 Support roller material: steel Roller pitch in millimetres: 60 Drive: gravity Net weight in kg: 35 Condition: used / fully functional Function test: OK

Condition: excellent (used), power: 178 kW (242.01 HP), operation weight: 30,000 kg, Year of construction: 2016, operating hours: 12,994 h, Equipment: air conditioning, CATERPILLAR 330FLN VAH Year: 2016 Operation hours: 12.994 hrs. ROPS Airco Radio Back drive camera 2 piece boom Stick: 3,10 m. All hydr. lines (hammer-, gripper-, scissor line) OQ70/55 quick coupler Itodpfxewx E Drj Afijn 2x bucket ( 1600 mm and 600 mm width ) u/c: approx. 70% good trackshoes: 600 millimeter width CAT 7.1 engine with 178kW central lubrication CE Operation weight: 30 to

Condition: used, Year of construction: 2020, working width: 30,000 mm, Design: Disc | Rauch Axis H 50.2 EMC+W VariSpread Pro Year of manufacture: 2020 Capacity: 5,000 liters Spreading width: 30 m Approx. 9,700 hectares spread Equipment: LED road lighting LED work lights Spreader cover monitoring S4 VXR plus spreading discs Rear-view camera ISOBUS without control terminal Border and boundary spreading device left and right Residual quantity weighing system VariSpread PRO – sliding section control Itsdsxfw T Aepfx Afien AXMAT DOU | Internal ID: 11313092

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Itjdpfewiripex Afijn

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Upgraded to the latest standard with spare parts support in 2015 Supported bag types: Quicklime, hydrated lime, cement, gypsum Iodpfx Aov Sz Tdsfijtn

Condition: refurbished (used), Flatbed die cutter Erba model TITAN 1 PN, format 64/88 cm, Picard plate, millimetric pressure adjustment, centralized lubrication, self-centering frame, 3 operating modes (single, continuous, timed), full enclosure, counter-die plate, machine completely overhauled. Isdoxd T Dbepfx Afiotn

Condition: used, Year of construction: 2006, functionality: fully functional, 2 rotary valve dosing valves Manufacturer: Torex Type: RV20 Inlet/Outlet Size: 300 x 300 mm Overall Height: 455 mm Sealing strips made of rubber Bolted plastic lining of individual chambers for improved discharge. Function tested! Bearings re-lubricable from outside. Iedpfexd Dukex Afiotn Last application: dosing of hydrated lime Drive power: 1.5 kW Speed: 30.9 rpm

Condition: used, 3-Roller Ring Bending Machine with Hand Crank Drive Manual Section Bending Machine KNUTH Type HRB 30 M Year of manufacture: approx. 1995 Shaft diameter: Ø 30 mm Top roller diameter: Ø 98 mm Bottom roller diameter: Ø 116 mm Drive rollers: 2 units Iodpfx Afjxbtxteiotn Performance data with standard roller set: Square steel (at Ø 150 mm): up to 18 x 18 mm Round steel (at Ø 180mm): up to Ø 18 mm Flat steel, flat (at 150 mm): up to 50 x 8 mm Flat steel, edgewise (at Ø200 mm): up to 30 x 10 mm T-section: up to 20 x 20 mm - Driven by hand crank - Millimeter scale for pressure roller adjustment - Standard roller set with 80 mm roller width - Top roller with wire groove, bottom rollers 2-piece Machine dimensions L x W x H: 750 x 330 x 1450 mm Weight: 160 kg In good condition

Condition: like new (used), functionality: fully functional, construction height: 2,000 mm, power: 2 kW (2.72 HP), Tapis elevateur equipé d un caisson epuration magnetique (neodymes) à nettoyage automatique . diametre 300 Elimination en continu des particules ferreuses dans les granulés, les poudres ou les pulverulents . agro alimentaire épuration des sucres et farines dans la chimie, épuration des poudres Itedjxdwytjpfx Afisn dans les plastiques épuration des granulés ou des broyés épuration du plâtre et ciment

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg Iodpfswiriisx Afietn 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes Isdswiricjpfx Afietn - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners