Used Lime for sale (118)

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: Lredpfx Adjq Nyzbj Nog - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: used, Standing lime silo, approx. 9x3 m, for sale in the Magdeburg area. Transport available upon request at cost. Lrjdowv Nlbepfx Ad Neg

Year of construction: 2019, condition: new, New SIAG Lime Silo For outdoor installation, with a usable capacity of 16 m³ CaO including: • Safety devices, • Over/under pressure flap, • Demand, full and empty detector • Filling line with B-coupling connection for tanker charging, • Dust filter with at least 17 m² filter area and mechanical shaking device • Ladder with safety cage (without intermediate platform), • Emergency shut-off device, • Connection flange for silo discharge dosing device, • Silo support frame with standing frame and walkway. Technical features: • Manufacturer: SIAG • Type: KS-ST 19 • Net volume: 16 m³ • Diameter: 2,400mm • Total height: approx. 8,000 mm • Dust filter: 17 m² • E-connection silo attachment filter: 0.13 kW Lredpfx Adsnyh Tvo Nog • 1 x Lime Discharge dosing system For even discharge/dosing of CaO from the lime silo. With a mounting device on the silo outlet flange, conveying length 800 mm.

Year of construction: 1995, condition: excellent (used), 1 x Free-Standing Silo Manufacturer: Stanelle Year of Construction: 1995 Diameter: 3000 mm Total Volume: 84 m³ Usable Volume: 70 m³ Total Height: 17.53 m Internal Pressure: +45/-5 mbar Material: ST 37-2 Total Weight: Approx. 12 tons Lodpfov Nri Rex Ad Norg Bulk Density: 600 kg/m³ Venting Filter: Infra-Jet AJN 204 (20 m²) Filling Line: DN 100 Pressure Equalization Valve: DN 150 Door: 850 x 2000 mm Folding Ladder with Rest Platform !! All structural design verifications available!! Vibrating discharge floor: Ø 1500 mm Material: Stainless steel 1.4301 Conical floor inclination: 50° Unbalanced vibrator JV 102-14 (0.45 kW) Slide valve: MFA DN250 Housing: Aluminum Slide plate: 1.4301 Aeration strip: Promelt V fluid strip 1250 x 125 Flap lock DN250 (200 liters) Material: Steel Max. 0.5 bar Dosing hopper: Screw pre-hopper 700 liters Dimensions: 1615 x Ø800 mm Material: Steel Max. 0.5 bar Dosing screw: DN100 SEW gear motor: 1.5 kW (25 rpm) Agitator drive: SEW 0.55 kW Various level sensors, Endress Soliphant FTM 930/931 vibration level switch Vegaflex 62 Vega probe Coating new in 2023 Substrate preparation: sandblasted Color manufacturer: Shervin-Williams Primer: ZG64 solvatic 2K EP primer, sand yellow, RAL 1002 Topcoat: ZD27 solvatic PU topcoat, cream white, RAL 9001 ! ! ! The parts list is attached directly below as a PDF! ! !

Year of construction: 2028, condition: excellent (used), functionality: fully functional, ELLIMETAL silo for PE granulate made of aluminium Year of manufacture: 2008 Max. capacity: 280 m³ and/or 168 tons Diameter: 4,500 mm Height: 24,000 mm Empty weight: 7,000 kg Lredpeyc Nzhsfx Ad Neg

Condition: excellent (used), functionality: fully functional, Aluminum silos ELLIMETAL SILOBOUW Year of construction: 1988 Diameter: 3966 mm Silo height: 10,914 mm Including balustrade: 11,627 mm Manufactured for polypropylene granules Capacity: 100 m³ - 50 tons Ljdpfoyc Nzbox Ad Njrg

Year of construction: 2019, condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Lredpfxovlxufs Ad Nog Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Electricity: 3 phase 380V, 50Hz; Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Year: 2019 Model: PRP-500

Condition: new, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, The hardware complex is designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; from about 70/30 to 30 tons / shift b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat, pork + l / l -70/30, up to 20-22 tons / shift Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm 3.Screw conveyor Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Ledpfx Ajv R Ttasd Nerg Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.

Condition: used, machine/vehicle number: YG9PPU3408N03xxxx, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 22074 Specifications: • EU-approved until 20.06.2026 • 2008 model • Air suspension • Tires (see pictures) • Full side opening • Lift on 1 • Steering on 3 • Length: 1,365 cm • Width: 260 cm • Axle distance: 135/161 cm • Weight: 9800 kg • Damage to tool compartment, visible in pictures • Interior length: approx. 1,344 cm • Interior height: approx. 277 cm • Interior width: approx. 253 cm • Ready for delivery Technical approved: Yes EU-approved until: 20.06.2026 Own weight: 9800 Total Weight: 42000 Payload: 32200 Width: 260 Length: 1365 Inside width: 253 Inside lenght: 1344 Lodpfx Adex Ip Tco Nerg Inside hight: 277 Model: Skapsemi med full sideåpning

Condition: ready for operation (used), functionality: fully functional, Glimek divider for rye dough Ljdex Sqddepfx Ad Nsrg ✓ Dough weight from 100 g, ✓ Electromechanical control panel, ✓ Equipment is in good technical condition

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: dark red, Year of construction: 2026, GNR 03 Mobile Lime Stone Crusher and Screening Plant has a capacity of 250 / 350 TPH. It can easily break stones of different hardness. Complies with international shipping standards. Installation and commissioning is done in a short time. Local workers (staff) are taught how to control. Lodownqfgopfx Ad Nerg Lifetime spare parts support is provided. OPTIONAL - By-pass system - Magnetic magnet - Generator System - Dust Removal System - Frequency Control System is used instead of soft starter - Control cabin and air conditioning Please call us for our other crushing plants and customized solutions.

Condition: used, Year of construction: 2008, functionality: fully functional, • Manufacturer: Ellimetal N.V. • Country of manufacture: Belgium 2. System Identification • System type: Bulk goods silo system • Configuration: Group of three (3) vertical silos • Application: Storage and handling of powder/silicon dioxide (“powder”) 3. Year of Manufacture • Year of manufacture: 2008 4. Capacity and Construction Data • Maximum storage volume: 190 m³ per silo • Design specific weight: 0.6 kg/dm³ • Empty weight: 4,000 kg per silo • Operating pressure: Atmospheric Ledpfex Iuqysx Ad Norg 5. Construction Design • Vertical cylindrical steel silos • Truncated conical discharge hoppers • External vertical access ladders with safety cages 6. Discharge and Dosing Equipment • Discharge system with conical bottom • Integrated vibrating activators (“vibrators”) • Rotary airlock valve for controlled discharge 7. Conveying Equipment • Integrated screw conveyor/auger system • Conveying components painted green 8. Control and Operation • Local control panels assigned to: – Silo Silica 1 – Silo Silica 2 – Silo Silica 3 • Control functions for: – Vibrating bin activators – Rotary valves / airlocks

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 364, Ice cream cones making machine, make COMACO Alimentare, model UNIRUS UR2, MFG: 2018, SN: 364, amperage 25A; power supply 380V, the consumption is 9 Kw, frequency: 50/60 Hz; the machine has a mould with 2 rows, with 7 cavities in each row, the total amount of rows in the mould are 14. The max diameter of the cone measured in mm is 80. The production average productivity with cycle of 2 minutes and temperature of 45 C⁰ is 420 cones. The production average productivity with cycle of 1 minutes and temperature of 45 C⁰ is 480 cones. Semi-automatic machine with inter changeable molds for making ice cream cones. The machine make’s cups and double cones of various size and capacities. The mould is opening and closed by hand. The moulds are field through a special feed device. Heating is made be electric supply 380V. The cones are automatically ejected into a container at the bottom of the machine when the lower mould is operated. Temperature control is automatic: the machine maintain the preset temperature until as signal (visual and audible) indicates the end of the cooking time. Price: 16.000 Euro + VAT, negotiable; Incoterms condition 2025, FCA, Oradea/Romania Lrjdpfx Adsx Dzifo Njg Irrtum, Anderungen und Zwischenverkauf vorbehalten/Subject to errors, changes and prior sale/

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic rewinder for foam. A machine designed for winding elastic materials such as PUR foam, polyester foam, latex. It consists of an unwinding unit and a winding unit. The machine has been adapted to wind a foam roll from a cut foam block. Wound foam rolls are used in different industries such as mattress manufacturing, footwear, and clothing production, among others. The machine is fully automated. It allows you to wind a specified number of running meters per roll. The number of meters depends on the thickness of the material. Thanks to special dispensers, the machine precisely handles winding a set number of meters of any flexible material (such as PUR foam). Maximum roll width is 220 cm. Diameter of the finished roll is approx. 100 cm. The material is wound onto a 63 mm diameter cardboard core. Machine dimensions: 650x350x165 cm. Power: 2 kW. Very low noise level, around 69 dB. Lsdpfox Dkinjx Ad Nsrg For those interested, please contact us. The machine is in very good condition with very few operating hours.

Condition: like new (used), Year of construction: 2015, BELIMED PH 820-2H-1ST Washing Machine Lrodpfx Adev Exmns Nsg This machine is suitable for washing laboratory utensils or similar items and has a maximum heating capacity of 26,5 kW. The total volume is approx. 500 litres Manufacturer: Belimed Year of construction: 2015 Floor Space: 155 x 115 x 340 cm Downloads

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4701, pressing force: 394 t, table width: 51 mm, table length: 680 mm, stroke length: 200 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Front: 510 mm Side: 270 mm Press stroke: 200 mm Clear opening: 455 mm Table Table size: 510 × 680 mm Power and Drive Press force: 394 t Motor power: 15 kW Speeds Downward speed: 350 mm/s Working speed: 4 mm/s Return speed: 300 mm/s MACHINE DETAILS Height: 2,710 mm Width: 1,530 mm Depth: 1,610 mm Lrsdpjwr Dvyefx Ad Nsg Machine weight: 6,620 kg

Condition: used, functionality: fully functional, machine/vehicle number: 6387828, Year of construction: 2015, operating hours: 15,465 h, load capacity: 1,600 kg, lifting height: 9,000 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, drive type: Elektro, Reach Truck Chassis number: 6387828 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 48V Battery capacity: 620Ah Battery type: PzS Battery year: 2015 Description: For sale is a reach truck manufactured by BT, model RRE 160. The machine is operational and fully functional. Both the technical and visual condition are good. This forklift is designed for professional use in high-bay warehouses, ensuring precise and reliable performance even at high lifting heights. The unit is equipped with a triplex mast offering a lifting height of 9,000 mm and a closed height of 3,750 mm. The load capacity is 1,600 kg. Year of manufacture: 2015. Operating hours: 15,465. A special feature is the integrated scale with millimeter display, which enables precise positioning and verification of the load, significantly streamlining workflow. The truck is fitted with a 48 Volt PzS battery (620 Ah, built in 2015). A charger is not included but can be supplied on request. Immediate availability. Fast and uncomplicated transport can be arranged upon agreement. Subject to prior sale and errors. Sale is made to the exclusion of any warranty or guarantee. Lrjdpfsyb Umgox Ad Nog Side shifter,

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Lrsdow R Rt Ispfx Ad Neg Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: ready for operation (used), NUM FS 200504B 200 506 A 26 Alimentation / power supply, used, normal signs of use, 100% functional, scope of delivery as per photos Lredpfx Asi Eb U Hsd Nsg

Condition: good (used), Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm Lodpok H R E Tofx Ad Njrg -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

Condition: used, mileage: 515,865 km, power: 235 kW (319.51 HP), first registration: 12/2007, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 5,000 mm, color: white, gearing type: mechanical, number of gears: 8, suspension: steel-air, Year of construction: 2007, Equipment: electric window regulation, Drivetrain Drive: Wheel Make of engine: Renault Lredpfx Aeuvip Rsd Nog Axle configuration Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Suspension: air suspension Weights Empty weight: 10.920 kg Carrying capacity: 15.080 kg GVW: 26.000 kg Functional Make of bodywork: OVA Number of compartments: 5

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2025, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. Lsdpfsq I Nxdex Ad Nerg 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Hammer crushers are versatile machines that can handle a wide range of materials and are suitable for both primary and secondary crushing. The size and design of the crusher depend on the specific application and material characteristics. Operators should follow manufacturer guidelines and safety precautions to ensure optimal performance and safety.

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. 3. Rotation: - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. Lrsdpfxeq Ngafe Ad Njg 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity.

Condition: new, functionality: fully functional, power: 320 kW (435.08 HP), fuel type: hybrid, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, CONSTMACH PI-1 mobile limestone crusher is a high-performance mobile crushing plant that offers maximum efficiency in crushing materials with low hardness and abrasiveness. Designed specifically for processing materials such as limestone, this plant provides long-lasting use with its durable structure and superior engineering. The PI-1 model combines all equipment, such as the primary impact crusher, vibrating screen, feed and stock belts, on a single mobile chassis, offering a compact and easily transportable solution. With its high production capacity, the PI-1 can crush between 150 and 200 tons of material per hour and can process feed sizes up to 850 x 850 mm. The products obtained thanks to the primary impact crusher have an excellent cubic shape and offer ideal granulometry for concrete production. Three or four different sizes of material can be obtained simultaneously. The PLC-controlled automation system, remote control, and optional diesel generator integration provide full control and independent operation. Thanks to its user-friendly design, the plant can be set up and commissioned in a short time. The hydraulic foot system eliminates the need for an external crane and allows for easy transport from site to site. The use of SIEMENS – SCHNEIDER branded components in all electrical and control systems ensures reliability and long-term performance. Lrjdjxqcrhspfx Ad Neg PI-1 Mobile Limestone Crushing Plant Technical Specifications Production Capacity: 150–200 tph Maximum Feed Size: 900 x 900 mm Feed Height: 4.5 meters Main Configuration: Primary Impact Crusher + Vibrating Screen Total Motor Power: 320 kW Electric Generator Requirement: 850 kVA Plant Weight: 49 tons Plant Dimensions: 18 (L) x 3.65 (W) x 4.5 (H) meters Chassis Type: Single wheeled chassis equipped with hydraulic opening legs Why Choose the PI-1 Mobile Limestone Crusher? CONSTMACH PI-1 combines high efficiency, easy transportability, and low operating costs in a single structure. With its European standard production quality, superior automation system, and durable components, it can be used reliably for many years. It provides maximum return on your investment with fast transition between sites, easy maintenance, and low energy consumption. With reliable performance, excellent cubic product quality, and the CONSTMACH guarantee, the PI-1 mobile limestone crusher is your best choice for professional stone crushing solutions. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: hybrid, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, onboard computer, CONSTMACHTM PI-2 mobile limestone crushing plant is a high-efficiency crushing solution specially designed for processing materials with low abrasiveness. With its compact design and robust construction, the PI-2 ensures excellent cubic-shaped final products while crushing materials such as limestone at high capacity. The plant is equipped with advanced engineering and can be assembled and put into production in a short time. It offers a complete mobile crushing and screening system with a vibrating feed bunker, CPI-1415 primary impact crusher, multi-layer vibrating screen, and foldable stock belt. The PI-2 mobile limestone crusher can be controlled via a single tablet thanks to its user-friendly automation infrastructure. The PLC system, equipped with SIEMENS and SCHNEIDER brand electronic components, ensures safe and stable operation of the plant. With a production capacity of 250–300 tons/hour, the PI-2 combines the performance of a stationary plant with the flexibility of a mobile structure. When needed, the integration of a diesel generator eliminates the need for external power. With dimensions that comply with international transportation standards, the PI-2 can be easily transported between different construction sites. PI-2 Mobile Limestone Crushing Plant Technical Specifications Production Capacity: 250–300 tph Maximum Feed Size: 1,000 x 1,000 mm Feed Height: 4.5 meters Main Configuration: Primary Impact Crusher + Vibrating Deck Screen Total Motor Power: 400 kW Electric Generator Requirement: 1100 kVA Plant Weight: 55 tons Ljdpjxqcq Djfx Ad Norg Plant Dimensions: 20 (L) x 3.85 (W) x 4.5 (H) meters Chassis Type: Hydraulic opening-legged wheeled single chassis Why Choose the PI-2 Mobile Limestone Crusher? CONSTMACHTM PI-2 offers a long-term investment advantage for businesses with its high performance, portable structure, and user-oriented automation system. Its durable components ensure low maintenance costs and maximum efficiency. Its easy assembly feature saves time, while its high crushing power strengthens your production line. Manufactured exclusively with quality materials and reliable engineering, the PI-2, combined with Constmach's industry experience, offers your business reliability, speed, and guaranteed uninterrupted production. What We Do at Constmach Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.