Used Lumber for sale (53)

Condition: used, functionality: fully functional, Vecoplan chipper for lumber shavings 45/16/ 2V - made in Germany - perfect chips directly into the kiln - vibrating system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - sieve 40 x 40 mm - top pulling gear shaft 4 kW - bottom pulling gear shaft 2.2 kW - reverse - vibrating feeder 10500 mm x 450 mm - motor power 2.2 kW - cross vibrator machine 4500 mm x 2200 mm - motor power 1.5 kW - height 2450 mm Transport dimensions: Iodpet Hr Drjfx Ah Njtb 1050 cm x 245 cm x 245 cm weight ~ 4 t

Condition: used, machine/vehicle number: YS901VFL4MSR1xxxx, Year of construction: 2009, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 20454 Specifications: EU approved until 17.12.2025 Itodpfx Aewi Rb Doh Nob 2009 model Air suspension 2 - 3 3 tires with some wear Brakes are recently improved Length: 1240 cm Width: 255 cm Wheelbase: 132 / 560 cm Curb weight : 6,920 kg Extra stakes included Drum brakes Description: Mjøby timber trailer, 2009 model, for sale. The trailer has recently had upgraded brakes and is EU approved until 17.12.2025. It is equipped with air suspension,  stakes...

Condition: used, machine/vehicle number: YT9T201621200xxxx, Year of construction: 2016, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 21532 Specifications: EU approved until: 31 October 2026 Model year: 2016 First registered: August 2017 Air suspension Tires: See pictures Length: 1,283 cm Width: 255 cm Axle distance: 134 / 550 cm Curb weight: 6,480 kg Max payload: 31,520 kg Number of bunks: 4 Description:Kilafors timber trailer from 2016. Manufactured in 2016 and first put into service in August 2017. It is EU-approved until 31 October 2026 and ready for operation.Delivery by agreement. Technical approved: Yes Ijdsxm Tbxopfx Ah Nstb EU-approved until: 31.10.2026 Own weight: 6480 Total Weight: 38000 Payload: 31520 Width: 255 Length: 1283 Model: 2016 Kilafors Tømmerhenger

Condition: used, machine/vehicle number: YT9T201521200xxxx, Year of construction: 2015, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 20797 Specifications: Itedpfewvzawsx Ah Nsb 4 axles 6 banks Lift on 4 Tires (see pictures) Air suspension Ready for delivery Technical approved: no EU-approved until: 29.04.2025 Own weight: 6630

Condition: used, machine/vehicle number: YS910FLS4MVB1xxxx, Year of construction: 2014, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 21318 Specifications: 2014 model 4 axles L ft p 3 axle Length: 1299.5 cm Width:255 cm Ready for delivery Description: We have a 2014 MVB10-FLS4 4 axle T mmer trailer for sale. The trailer is EU approved and works as it should. Ready for delivery. Technical approved: Yes Itodpfjxcfkkox Ah Neb EU-approved until: 05.10.2026 Own weight: 5930 Width: 255 Length: 1299,5 Model: MVB10-FLS4 4 akslet 2014 MVB10-FLS4 4 akslet Tømmerhenger

Condition: used, machine/vehicle number: YY9AAA2646B01xxxx, Year of construction: 2011, Applicable material: Wood Please contact ATS Norway for more information Please provide reference number upon request: 17479 Iedpfxevg Nrdo Ah Njtb Specifications: - 2011 model - Tires (see pictures) - Air suspension - Length: 1,305 cm - Width: 255 cm - Wheelbase: 136/538 cm - Net weight: 6,100 kg - Max payload: 29,900 kg Description: 2011 Trailer-bygg timber trailer. Can be delivered within a short time. Technical approved: no EU-approved until: 02.05.2023 Own weight: 6100 Total Weight: 36000 Payload: 29900 Width: 255 Length: 1305 Model: Trailer-Bygg tømmerhenger

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Iedpfexnbctsx Ah Notb Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: new, axle configuration: > 3 axles, color: red, Year of construction: 2022, Pipe wagon    • Fully available as per request    • Payload from 6 to 25 tons    • Length fully customizable    • Braked or unbraked Isdpfjx Anhfex Ah Njtb Condition: New Year of manufacture: 2022

Year of construction: 2024, condition: new, - 340 mm Cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm cutting length - 3-20 m/min - 2 x 18,5 KW sawing motor - 1,1 KW feed motor - 0,25 KW width adjustment motor - 1300 Kg weight Itedpfxe E Rg Se Ah Nob

Year of construction: 2024, condition: new, max. cutting height - ø 340 mm min./max. cutting width 80 - 250 mm min./max. side board 18 - 80 mm max. cutting length 6.000 mm feed rate 5 - 30 m/min. sawing motor 2 x 55 kW feed motor 4,0 kW Iodpfx Ahsu Izks Njtb width adjustment motor 0,55 kW infeed roller motor 0,75 kW weight 8,000 Optional equipment Laser adjustment Infeed table extension up to 8.000 mm Automatic width adjustment with 6 fixed dimensions Equipment with 1.000 mm dia. blades Motorized log turning device Electronic braking device

Condition: used, functionality: fully functional, Complete cut timber sorting plant for sale! Itodjxhdqmopfx Ah Nsb

Condition: used, Sensor module, G2 flat module -Manufacturer: Lumberg -Type: ASBS 8/LED 5-4 -Number: 3x available Itsdpfx Ascuh Efsh Njb -Price: per piece -Weight: 0.26 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 1522, type of input current: three-phase, input voltage: 400 V, grinding wheel diameter: 225 mm, rotational speed (min.): 1,500 rpm, overall weight: 850 kg, space requirement height: 1,400 mm, space requirement length: 1,230 mm, space requirement width: 850 mm, grinding wheel width: 50 mm, clamping range: 85 mm, year of last overhaul: 2024, • Grinding range 13 - 85 mm / Point angle 80° - 160° • Overhauled 6-jaw special chuck in 03-2024 (€ 6,250) • Including operating tools • Water tank on wheels (60 liters) • Extension sleeves • Halogen lamp 230V Includes operating manual, exploration drawing, wiring diagram, assembly and spare parts list. Supply of spare parts and maintenance continues to be guaranteed by a specialist company! Itodpsxyhl Sofx Ah Njb

Condition: used, Radial Drilling Machine SCHLUMBERGER type RF6 Itsdpfxexu Icmj Ah Nsb Manual raising Cone: CM4 Spindle speed: from 35 to 1800 RPM Table size: 1000 x 650 mm Column slide travel along bed: 750 mm Maxi distance spindle nose/table: 700 mm (in high position) Mini distance spindle nose/table: 250 mm (in low position) Manual up/down of table + column Automatic descent Rotation at 360° on column Hydraulic column locking Drilling / tapping function Lubricant pump Voltage: 380 V Width: 1400 mm Depth: 900 mm Height in low position: 2650 mm Height in high position: 3000 mm Weight: approx 3 T

Condition: used, Radial Drilling Machine SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Machine support dimensions: 1400 x 1200 mm Isdpoxu Ibpefx Ah Netb Total height in height position: 2800 mm Total height in low position: 2550 mm Weight: approx 3,5 T

Condition: used, Year of construction: 2010, functionality: fully functional, We are offering two IDC machines by LUMBERG, model VARICON 7000, for sale. Specifications: VARICON 7000-1: RAST 5, RAST 2.5 Plus, year of manufacture 2010 – photos and video included in the listing. The listing, price and photos refer only to this machine VARICON 7000-14: RAST 2.5 Plus, year of manufacture 2016 – photos and video available upon request. Both machines are in full working condition. Itedpfoxt Rn Nex Ah Nob Price shown only for VARICON 7000-1 (RAST 5, RAST 2.5 Plus, year 2010).

Condition: excellent (used), functionality: fully functional, Grecon Dimter OptiCut 304R Optimizing Cross-Cut Saw Minimum input wood length: 500 mm with loading onto support table Minimum input wood length: 900 mm with loading via cross chain conveyor Maximum input wood length: 6300 mm Iodpox Up Nqjfx Ah Nstb Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Maximum wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade rotational speed: 4200 rpm Maximum feed rate: 230 m/min Cutting modes: - Fixed length cutting - Lumber length optimization for maximum yield - Defect removal with chalk defect marking

Condition: excellent (used), functionality: fully functional, Complete, high-performance planing mill with WACO 6-head planer, double resaw bandsaw, full mechanization, moisture measurement, control system, etc., etc. Simply complete! Capacity approx. 2,500 m3/month per shift, depending on dimension. The installation consists of: Tip destacking, single piece feeding, Brookhuis moisture measurement, double resaw bandsaw by Brau Canali, small bundle strapping with Böhl bundle formation and feed to the stacking machine, 2 x stacking machines with batten placing, complete packaging line with film dispenser, package press with lower squared timber insertion. The full Siemens control system, complete steel substructure, all wiring and piping, etc. Very well-maintained installation for the production of battens, tongue and groove, and dimension lumber. Itedpfew N S Nhox Ah Neb

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 4,041 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,150 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 16X7X10 1/2, rear tire size: 23X10-12, overall weight: 7,900 kg, empty load weight: 4,900 kg, total height: 2,350 mm, total length: 2,200 mm, total width: 1,950 mm, color: green, motor model: V1505-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, Looking for a reliable forklift? We are industry specialists! We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. Browse our offer and find the perfect equipment for your business! Featured in this listing: COMBILIFT C3000 – DUPLEX 4100mm – Year 2013 – 4041 MTH – DIESEL – FREE LIFT – FORK POSITIONER – SIDE SHIFT – 1150mm FORKS – CONDITION: 5/5 The forklift is in excellent technical condition and ready for immediate use. Key Features and Technical Specifications: - Model: COMBILIFT C3000 - Year of manufacture: 07/2013 - Lifting capacity: 3,000 kg - Operating hours: 4,041 mth - Mast type: Duplex - Lift height: 4,100 mm - Power source: Diesel - Load center: 600 mm - Total weight: 4,900 kg - Tyres: Solid, superelastic, in good condition - Front tyres: Superelastic – 16X7X10 1/2 – 100% tread - Rear tyre: Superelastic – 23X10-12 – 100% tread - Overall height (mast lowered): 2,800 mm - Technical condition: Fault-free, after full service inspection - Visual condition: Very good - Fork length: 1,150 mm - Free lift: 2,000 mm - Overall height: 2,350 mm - Overall length: 2,200 mm - Overall width: 1,950 mm - Fork positioner width: 1,200 mm Equipment: - Lighting - Adjustable boom - Side shift - Pallet forks - Fork positioner - Cabin Ideal for industries such as: - Timber and lumber - Steel and pipe - Any operations requiring transport of long loads in confined spaces Thanks to its four-way capability, this forklift ensures easy maneuverability and optimal use of warehouse space. Additional Features: - Integrated multidirectional steering system - Comfortable operator cabin - High reliability during intensive use - Suitable for indoor and outdoor operation Ijdpfx Aheyal Ncj Njtb Condition: A fully operational machine, regularly maintained, and ready for immediate work. We offer delivery across Europe and include a free initial inspection!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 600 mm, feed length X-axis: 6,200 mm, overall weight: 2,300 kg, height adjustment type: pneumatic, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 120 mm, working height: 900 mm, compressed air connection: 6 bar, warranty duration: 12 months, The KP 900 Automatic crosscut saw is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27–30 m3 of pallet lumber or approximately 20,000 pieces of pallet blocks per shift (8 hours), depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the processed material, which is manually loaded into the machine. Itodpfx Ahsubbtks Nob

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Itsdpfx Aog Rxhgsh Neb

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Itsdpex Ut H Tefx Ah Nsb Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.

Condition: new, Year of construction: 2026, I am selling this industrial heavy-duty rip saw RS-ES-800 KUSING. The machine is in stock in Kežmarok (Slovakia). It is an industrial heavy-duty rip saw intended for processing soft and hard lumber of larger cross-sections with multiple blades. Technical parameters • Number of blades: up to 15pcs (+ 3pcs on the movable unit) • Motor power: 37 kW (standard), adjustable according to requirements • Machine weight: 3 500 kg • Pressure roller lift: Electric, controlled from external panel • Blade positioning: Electric, via computer • Number of feed rollers: 6 + 3 (upper and lower) • Front traction roller: Positioned in front of the wedges for rapid ripping • Extraction system: Upper and lower dust extraction for maximum cleanliness • Material width: 800 mm Multi-blade solution: - Possibility to install up to 15 blades + 3 movable blades. - Movable unit with a separate space for 3 blades, each 110 mm in length. Power: - Standard motor 37 kW (adjustable according to customer requirements). - Feed motor power 1.5 kW. Material feed: - A total of 9 feed rollers (6 + 3) ensures even advance and prevents torsion of the lumber during cutting. - Front traction roller placed in front of the wedges minimizes kickback and significantly facilitates feeding of boards or tall timbers. Electric control: - The lift of the pressure rollers and blade positioning are performed electronically via an external control panel, which increases the speed of setup during line ripping. Itsdpjx Uty Tsfx Ah Njb Perfect dust extraction: - Integrated extraction systems in both upper and lower parts of the machine ensure maximum cleanliness of the workspace. Easy maintenance: - Special construction allows the top cover to be folded up, so maintenance and cleaning of the machine are quick and hassle-free. The specialty of this machine is the front traction roller, which is placed in front of the wedges against kickback—this speeds up feeding boards into the machine and especially helps when feeding tall timbers, as it is not necessary to overcome the resistance of the wedges and the machine pulls the material in by itself. Thanks to the three traction rollers, it is ensured that the material does not tend to twist during the cutting process, thereby increasing the quality of the cut. The machine has excellent dust extraction from both the upper and lower parts, which ensures maximum cleanliness of the machine. The machine is specially constructed to be as easy as possible to maintain and clean. The top cover folds open and allows the operator to easily clean the machine.

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Technical Specifications • Motors: 2 × 4 kW Itedpfx Ajx Utv Ieh Neb • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), Year of construction: 2020, Complete sawmill for pallet lumber consisting of: Itedpfxjx T Azwo Ah Nsb 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory log input measurement system by Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter from 20 - 90 cm. 2. Sawmill: Möhringer band saw, running bandsaw with Flexi Drive carriage. Slab scanning unit. Round timber intake with step-by-step singulation. Laser measurement by Bidac. Kallfass cross-cut unit. Resaw: EWD Optimes with chipper canter and double arbor saw NKU. Brodbaek edger system. Stacking system for main products, empty pallet handling for both main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electric and electronic control cabinets, etc. Waste disposal. Detailed plans or video can be provided upon request.