Used Factory for sale (1,763)

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Cpedpfx Asuhmacsc Nju Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,500 h, power: 200 kW (271.92 HP), Complete pellet production line for the production of feed pellets/straw pellets/fertilizer pellets from agricultural raw materials, whereby the pellet press and hammer mill are also suitable for the production of wood pellets. Hammer mill is completely new (built in 2021) and has only been in operation for 2 hours. Valid ATEX certificate! SCOPE - Pellet press - Conveyor belt - Elevator - Pellet cooler + sieve - Buffer container with discharge for the ground material Cpedpfx Ajv Ak S Djc Nou - 2 cyclones (centrifugal separators) with rotary valve - Fan for cooler extraction - 1 new ring die and various used spare parts - Feeder table for bale shredder - Bale shredder including control - Hammer mill (new) including control - Centrifugal separator - Scheuch dust filter including control - Discharge screw - BigBag station for dust filter TECHNICAL DETAILS System throughput: 1.3 t/h (depending on material) Hammer mill throughput alone: 2 t/h (depending on material) Pellet press output: 75 kW Feeder table length: 10 m Bale shredder output: 35 kW Hammer mill output: 75 kW Output Dust filter: 20,000 m³/h Dust filter manufacturer: Scheuch Dust explosion report: 2023, according to EU ATEX Directive 2014/34 MACHINE DETAILS Hammer mill dimensions: 2,350 x 970 x 1,200 mm

Condition: used, operating hours: 892 h, This robust sweeper from Factory Cat is perfect for sweeping larger areas with varying degrees of dirt. Using the two side brushes, you easily sweep the dirt into the path of the machine. The large main brush then sweeps the dirt into the 116 L steel collection bin. The remaining dust is collected in the filter and all this ensures that you can sweep up large amounts of dirt in one go, without leaving any behind on the floor. The chassis is made of sheet steel and is strong enough to last for years. The side brushes are protected by steel caps, and polymer rollers are installed at the corners on the front. This minimizes damage to the wall and the machine in the event of a collision. Factory Cat cleaning machines are manufactured in America and are known for their strong construction, long life and excellent performance. All major components are easily accessible, making the machine easy to maintain. Other Specifications: - Theoretical capacity: 7,000 sq. ft, - Sweeping width of main brush: 81 cm, - Sweeping width with 2 side brushes: 117 cm, - Side brush diameter: 43 cm, - Battery working time: up to 7 hours, - Power source: 24 V, Csdpfjnyiqvex Ac Nopu - Dumpster capacity: 116 L, - High-loss system: No, - Traction on: front wheel, - Maximum speed: 5.6 km/h, - Filter area: 3.43 sq. ft, - Noise level: 71 dB(A), - Weight (without batteries): 385 kg, - Weight (with batteries): 515 kg, - Dimensions (LxWxH): 163 x 94 x 140 cm, All our occasions are delivered with new wear parts and a new battery pack. The Factory Cat TR therefore sweeps like a new machine again. Would you like to know more about this sweeper? Please contact us, our advisors will gladly tell you more about it!

Condition: used, operating hours: 341 h, The Factory Cat GTX 30-C is a ride-on scrubber-sweeper built specifically for the industrial application. With a high downward adjustable brush pressure, the Factory Cat GTX 30-C gets even the most heavily soiled floors clean. With the cylindrical brush system, two counter-rotating brush rollers not only deliver a perfect scrubbing result, but these rollers also ensure that loose debris is collected in a special dirt collection tray. All our occasions are delivered standard with: - Complete service, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, Cpjdou Iv S Repfx Ac Nou - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. In addition, you can contact Metech for all machine maintenance and reorder cleaning products.

Condition: used, The Factory Cat XR is a sit-on scrubber, suitable for cleaning heavy to very heavily soiled floors. This robust ride-on scrubber is specially designed for applications in industry and for fast and efficient cleaning of medium to large business or production areas, parking garages, et cetera. Faster, better and with very economical use of water and chemicals. You will be amazed at the results! This Factory Cat XR is equipped with the optional sweeping brushes. All our occasions come standard with: - Complete service, Codpsu Iv Tbjfx Ac Nepu - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. In addition, you can contact Metech for all machine maintenance and reorder cleaning products. In addition to this used Factory Cat XR, we also have new scrubbers and demo models available. Check out our new scrubbers for more information.

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Csdexnzuiepfx Ac Nepu Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning Cpedpfxsxqd T He Ac Nju All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: excellent (used), Large selection of nice conveying direct from closed cheese factory. Cedpeycm D Hsfx Ac Nspu

Condition: excellent (used), Year of construction: 2020, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 1VRA170V7L1001764, overall weight: 4,990 kg, fuel type: diesel, color: yellow, empty load weight: 4,990 kg, fuel: diesel, emission class: euro4, number of seats: 1, drive condition: 100 %, chain condition: 100 %, tire condition: 100 %, Equipment: additional headlights, all wheel drive, differential lock, gripper hydraulics, hydraulics, rubber tracks, soot filter, For sale we offer a Vermeer D20x22 S3 (Series III) horizontal directional drill from 2020—a thoroughly inspected, medium-class machine designed for guided drilling applications for telecommunication, power, gas, and water/sewage installations. This model is renowned for its compact size, high work precision, and excellent power-to-weight ratio. The drill rig was purchased from the official Vermeer dealer in Poland. Due to a lack of projects for this machine, it remained unused at the company premises, currently showing only 4 operating hours. It was occasionally started to keep it running and sometimes moved within the premises. Its condition, as shown in the photos, is virtually perfect. We welcome you to inspect the machine in person. Additional purchase options: - DigiTrak GPS Falcon F2 locator - Mud system at €7,000 net. NOTE! The price in the listing applies to the MACHINE ONLY! We have various drilling rigs for sale—ask our sales representatives for more information. We offer all payment forms: Leasing, financing, cash, and bank transfer. If you pay by cash or bank transfer, you can drive the vehicle away immediately. We also provide insurance services—we will calculate the lowest insurance premium for any vehicle—TRY US! We deliver paid cars and trucks directly to your indicated address anywhere in Europe. Technical Specifications: - Model: Vermeer D20x22 S3 Navigator - Year of production: 2019 (2020 MODEL) Codpfx Acoyf Ians Nepu - Type: HDD horizontal directional drill Engine: - Manufacturer/model: Deutz TD2.9 - Power: 74 HP (55 kW) - Fuel type: Diesel - Max. rotational speed: 2,600 rpm - Cooling: Liquid - Emission class: Tier 4 / Stage IV–V Drilling parameters: - Thrust/pullback force: 19,500 lb (86.7 kN) - Spindle torque: 2,250 ft-lb (3,050 Nm) - Max. spindle speed: 257 rpm - Minimum drilling diameter: 3" (76 mm) - Max. carriage speed: 48.8 m/min - Drill frame angle: approx. 17–18° Dimensions and weight: - Transport length: approx. 5.82 m - Width: approx. 1.21 m - Height: approx. 1.88 m - Operating weight: 4,990 kg Features and equipment: - Hydraulic breakout (rod breaker) - Stakedown system (ground anchoring) - Strike Alert underground utility warning system - Remote lockout - Semi-automatic rod loading system - Clear control panel with joysticks - Compact design—ideal for urban job sites Machine advantages: - Excellent power parameters despite compact size - High drilling precision - Reliable Deutz engine - Popular model—easy access to spare parts and service - Perfect for fiber optics and power cables Note: Due to system limitations, the year of production was entered as 2024 and marked as NEW, although the actual production year is 2020. The listed price is net and applies to exports as well as companies. Substantial discounts possible for private buyers— Contact us directly by phone for your best price!

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: Csdodf S Eyepfx Ac Njpu (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Includes the following machinery: Csdpfov Ig Hhsx Ac Nepu 1️⃣ Welding and Cleaning Line – ProfteQ QUADOS Including: 4-head welding machine QUAD OS12 + transfer/cooling table + CNC corner cleaning machine FRT9 + automatic loading table 2️⃣ Machining Center – Mecal MC 304 Atlas 4-axis machine equipped with a head for frontal machining, specifically designed for aluminum processing. 3️⃣ Double-head cutting-off machine – FOM ALVA 500A – year 2005 Blade: Ø 500 mm – Blade inclination: external 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 600 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ Single-head cutting-off machine – MG TLG 350 Blade Ø 350 mm – Table rotation: 45° - 0° - 90° 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Cpsdpfx Acswgcchs Nju

Year of construction: 2026, condition: new, Fruit processing where you want! The Mobile MK Fruit Processing Unit can be installed and operated anywhere. For operate, only water, electricity and gas or diesel are needed - then the processing can begin. Cedpfx Aced Atf Ss Nspu The processing machines can also be used separately by the Mobile MK fruit processing units independently. All machines are made of stainless steel. The vehicle body is made of aluminum and the box made of plastic. The unit is equipped with high-pressure cleaner, compressor and optional built on customer request with weatherproof pre-tent. - Capacity: 800 kg / hour - Weight: 3.5 tons (depends on the type and number of machines fitted) - Equipped with compressor and high pressure washer - Water, gas (or diesel), 10 KW of energy required for its operation - Unique tent system against weather conditions

Year of construction: 2026, condition: new, Fruit processing where you want! The Mobile MK Fruit Processing Unit can be installed and operated anywhere. To operate, only water, electricity and gas or diesel are needed - then the processing can begin. The processing machines can also be used separately by the Mobile MK fruit processing units independently. All machines are made of stainless steel. The vehicle body is made of aluminum and the box made of plastic. The unit is equipped with high-pressure cleaner, compressor and optional built on customer request with weatherproof pre-tent. - Capacity: 600 kg / hour Cpjdpfxsd Arutj Ac Nju - Weight: 3 tons (depends on the type and number of machines fitted) - Equipped with compressor and high-pressure washer - Water, gas (or diesel), 10 KW of energy required for its operation - Unique tent system against weather conditions

Condition: new, functionality: fully functional, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Cjdpfx Aoxnptgsc Nspu Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: new, functionality: fully functional, machine/vehicle number: 1.127-001.0, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 139 kg, warranty duration: 24 months, water tank capacity: 50 l, Technical specifications: Condition - NEW! Catalog number: 1.127-001.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 50 / 50 Theoretical area coverage (m²/h): 2040 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 139 Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 900mm suction bar with oil-resistant polyurethane rubber. Cpodpfx Acjxnyl Hj Nsu Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and a charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable device.

Condition: used, tank capacity: 1,175 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Internal diameter: 1,000 mm Total height: 2,050 mm Heating/Cooling: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.50 bar Support type: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: Thermoplate Nameplate: Volume: 1,175 liters Double jacket volume: 7.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contacting material: V2A 1.4301 (AISI 304) Condition: factory new Cylindrical height: 1,250 mm VESSEL Max. permissible operating temperature: 50 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom heating/cooling: Thermoplate EQUIPMENT Cpsdpfx Asxqcqdoc Nou Manhole / Access hatch: on cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Surface outside: ground/polished Surface inside: ground/polished Feet material: stainless steel

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment Cpjdpfjcr U Urex Ac Nju “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) Cjdpfx Aoh T Dvtjc Nspu KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: used, tank capacity: 1,050 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: standing Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 1,000 mm Total height: 1,810 mm Heating/Cooling: available Max. allowable operating overpressure: 6.0 bar Support type: feet Location: external storage Technical documentation: drawing Cylinder temperature control: Thermoplate Volume: 1,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,238 mm Csdpfx Acox Dmbme Njpu TANK Number of feet: 3 pcs EQUIPMENT Manhole / dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL PROPERTIES External surface: marbled

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 Cjdpjx Dmbgefx Ac Nepu MATERIAL CHARACTERISTICS Exterior surface: marbled

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Cjdpfxeuxmt Ts Ac Nepu Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: good (used), Total contents of recently closed ice cream factory - the UK's oldest ice cream company Parravani's. Codpsxm S Nhsfx Ac Njpu

Condition: good (used), Handtmann VF620 vacuum filler, in lovely condition. Has been pumping veg product into a PowerHeater extruder. Cpjdpfet R Sl Djx Ac Nju

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Cpedpfxouc Tzvo Ac Nou Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.