Used Libra for sale (35)

Condition: excellent (used), functionality: fully functional, Electronic control of X-axis X-axis positioning speed (m/min) 25 Pneumatic tilting heads Dolhcdeyn Adyjw Escd External tilt 45° Mechanical adjustment of intermediate angles Hydro-pneumatic blade feed Usable cutting length (mm) 4,000 Minimum standard cut with 2 heads at 90° (mm) 310 Blade diameter (mm) 500 Feelers / copy sensor

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Dcslsylyhdjhcdw Eed Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). We are happy to assist with this. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)

Condition: excellent (used), functionality: fully functional, Blade diameter: 350 mm Maximum cutting capacity: 4000 mm Pneumatic tilting of the heads Number of speeds: 2 Maximum blade speed: 2820 rpm Dslhcoxzfa Nsdw Eocd Motor power: 4.8 kW Machine dimensions: 5600 x 1800 x 2000 mm Machine weight: 1400 kg

Condition: used, Year of construction: 2022, Used machine Dcjlhcdwex Hbr Ie Eed Year of manufacture: 2022 Specifications and technical data: - Casadei Libra 10/95 TC machine with V2 promotional equipment package - Working width: 950 mm - Suitable for smaller craft businesses for occasional use - Combination sanding unit with sanding pad for fine sanding - Standard with angled-grooved steel roller Ø 120 mm for calibration - Fine adjustment of working height - Clearly arranged control panel on the front - Robust, tube-reinforced monoblock steel machine body, robot-welded, with high-mounted working units for maximum rigidity - Motorized height adjustment of the work table with digital display - Electronically controlled sanding belt oscillation - Conveyor feed via gear motor with two speeds - Natural rubber feed belt with negative profile - Flexible steel pressure bar in front of the first unit - Rubber pressure rollers in front of and behind every working unit - Pneumatic belt tensioning for each unit, with decimal correction option for grit/belt thickness - Universally applicable for solid wood and veneer thanks to combination unit - Entry-level model for smaller companies - Combination unit for calibration and sanding: - Angled-grooved steel roller Ø 120 mm with fine height adjustment - Hard sanding pad with graphite backing - Universal version for calibration and sanding of solid wood, particleboard, and veneer - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control "FOX 500 KTR" - Table extension with 2 rollers at infeed and outfeed - Automatic table positioning with push button - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Max. working width: 950 mm - Feed speed: 4.5/9 m/min - Workpiece height: 4 - 170 mm - Motor: 7.5 kW - Extraction port: 140 mm Dimensions: 1388 x 1545 x 1668 mm Weight: 600 kg Availability: short term Location: Röllbach

Year of construction: 2008, condition: ready for operation (used), A double-head miter saw Emmegi for cutting metal and profile material is available. Saw heads: 2, saw blade diameter: 350mm, max. cutting length: 4000mm, cutting range: 130mm, saw blade speed: 2820rpm. Machine dimensions X/Y/Z: approx. 5000mm/1800mm/2000mm, weight: approx. 1600kg. Documentation available. On-site inspection is possible. Dcolhcdsya Hwusw Ejd

Year of construction: 1998, condition: ready for operation (used), A double mitre saw Emmegi (Pressta Eisele) is available. Saw heads: 2, saw blade diameter: 500mm, speed: 2800rpm, cutting speed: 73m/s, usable cutting length: 6000mm, min. cutting length at 90°: 350mm, cutting angle range: approx. -22.5°/+45°, feed rate: 60mm/s, machine weight: approx. 2000kg. An on-site inspection is possible. Expected to be available from mid/late February 2026. Dcjlhox Eculecdw Eod

Condition: used, Counting scales, scales, parcel scales, weighing platform without terminal -Weighing platform without: evaluation device for scales -Weighing range: min.0.02 kg -Weighing range: max. 12 kg -Number: 1x available -Dimensions: 330/235/H90 mm -Own weight: 4.7 kg Delhcjd Niawjdw Eocd

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration Dcolhecr S Ecscdw Ejd 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR Dcslhcdjgf Sw Now Esd - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Total power 14 kW First calibrating unit with steel roller Second combination unit with rubber roller Working width 950 mm Two carpet feed speeds Dolhcox Hdtnsdw Escd Electric table height adjustment Shoe with adjustable activation time Oscillation with photocells CE marking Year of manufacture 2007

Condition: excellent (used), Wide Belt Sander Casadei Libra RTC 95 - Sanding width: 95 cm - Two sanding units driven by an 11 kW motor - The first unit calibrates the steel roller; the second unit handles the rubber-coated roller and the sanding pad. Switching on/off is controlled via the control panel. Oscillation via photocell, low compressed air requirement External dimensions: L 180 cm, W 145 cm, H 200 cm Weight: 1150 kg Djlhcdjx E Rlzjw Ejcd

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm Dcjlhsknyhlscdw Eed weight: 660 kg

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital Delhceirmg Uodw Eocd aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Sanding width 1100 mm Min. ÷ max. working height 4÷170 mm Sanding belt width 1115/1370 mm Sanding belt length 2150 mm 2 feed speeds 4.5-9 m/min Dolhcoxwwgyjdw Eocd Feed motor 0.45/0.8 kW Table adjustment motor power 0.25 kW Motor power (HP) for single or dual-head machines 11 kW (15) 50 Hz Operating pressure 6 bar

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Dsljxlvn Ejhcdw Eocd

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Doljrddh Ijhcdw Eecd Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE.

Condition: excellent (used), Year of construction: 2018, 058 USED Libra bread divider. TECHNICAL DATA: - division range: 250-2000 g., - smooth speed regulation, - capacity up to 2400 pcs/h, - smooth dough weight regulation. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Dolhjv Dtwxscdw Eecd Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. Dcolhcewwkuyedw Ejd - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Condition: new, Year of construction: 2022, machine/vehicle number: MR004406, Wide belt sander with a maximum working width of 950 mm. The maximum working height of this machine is 170 mm. Price is ready to use, provided with cord and hine is equipped with the following options: - Machine in accordance with CE regulations - Activate calibration roller via switch on control panel - Activate sanding shoe via switch on control panel - Automatic table positioning with thickness sensor - Automatic centering of feed carpet Technical specifications: - Number of sanding units: 1 - Sanding unit 1 type: Combi calibrating sanding shoe - Maximum sanding width: 950 mm - Maximum working height: 170 mm - Minimum working height: 4 mm - Feed speed: 4.5/9 /min - Sanding belt length: 1,525 mm - Sanding belt width: 970 mm Dcjlhcsl Dxgyodw Eed - Motor power: 10 hp - Serial number: AB00024845

Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Applications Dcelhjyc Igvocdw Eod • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos)

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing Dcsloxizcvjhcdw Eed • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: good (used), Year of construction: 2001, functionality: fully functional, 2N RR N.2 nastri a rullo per legno massiccio e impiallacciato Two roller belts for solid wood and veneer 2 B~nder/Rollen f~r Massivholz und Furnierholz 2 rubans Dcelhcdov E I U Usw Esd • Bandschwingung-und-zentrierung mit pneumatischem System und geschlossenem Stromkreis ~ rouleaux pour bois massif et plaqu~ 2 Bandas de rodillo para madera maciza y chapeados • Vorschubgrenzer mit Notaus • Bremse f~r Banddrehungsarretierung • Schwingende bandspannende Rolle • Dr~ckrollen aus Stahl • Yo rd ere Sicherheitstange • Mechanische Dickenzeige • Teppichschutzvorrichtung mit 2 Eingaberollen und 2 Ausgaberollen • Absaug~ffnungen 160 mm, the Band • CE Yorschriften

Condition: good (used), Year of construction: 2003, overall weight: 1,900 kg, Paoloni Kalibra 30 Dolhsrumipecdw Ejcd - maximum sanding width 110 cm - one 15 kW motor - first unit with a metal roller, - second unit with a grinding shoe and a rubberized roller - shoe control from the table - weight 1900 kg. The machine works very well.

Year of construction: 2018, condition: ready for operation (used), Table dimensions: 2x 4000x2000mm, length: 11,332mm, width: 7285mm, height: 3600mm, with documentation and accessories. Dslhjhvaqfocdw Escd

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . Dcelhcdsvt Su Iow Ejd With hydraulic-unit, electric motor and Voith Turbo coupling . With new cone and shell . Overhauled, sandblasted and painted .