Used Lbx 200 for sale (40,127)

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 2030 mm stroke 550 mm Distance table/ram, stroke up 1800 mm table surface area 2000 x 2800 mm table height over floor 760 mm Chodpovuk Hlofx Ab Tjf ram surface 2000 x 2000 mm Side window 2000 mm feed down 400 mm/s power requirement 51,0 kW weight 33,0 t dimensions (WxDxH) 3,25 x 3,5 x 5,4 m Height above floor 5,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependant on pressure and way, ram interlocking no foundation pit necessary as is where is, WITHOUT putting into operation / WITHOUT additional work

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. Chsdpfx Aex Dnb Usb Tef • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Equipment: Butterfly valve Design: upright Remarks: Hand lever for butterfly valve missing Inner diameter: 600 mm Chodpfx Aex Dlvisb Tef Total height: 1,800 mm Power: 0.75 kW Top cover: welded lid with folding segment Agitator: propeller Base type: mobile on castors Location: Bremen Nameplate: Volume: 200 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Last application: pharmaceutical industry TANK Number of legs: 4 pcs EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Leg material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 volts Agitator arrangement: eccentric in top cover Agitator equipment: speed control via frequency converter (see photos)

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Chedpjubamvjfx Ab Tjf Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: excellent (used), CATALOG NO. 6623 TECHNICAL DATA - Diameter of processed logs: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Sequence: - 2 geared feed rollers - 4-knife cutterhead Cjdolrvhnspfx Ab Tshf - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – Manufactured in Germany - Suitable for taper turning of posts – Used rounder, in very good condition Net price: 129,900 PLN Net price: 30,920 EUR (based on 4.2 EUR/PLN rate) (Prices may change according to currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to identify the goods. We only resell items that were previously placed on the market by the manufacturer. We have no business affiliation with the manufacturer.

Condition: good (used), For sale: Mitutoyo micrometer set for external measurement in the range of 200–300 mm. Precise Japanese analog micrometer with an accuracy of 0.01 mm. The set includes everything shown in the photos. - Original Mitutoyo frame with lightweight construction - Measuring head with clear scale - Set of 4 measuring rods - 3 measuring anvils - Standards and adjustment tools - Multilingual user manual - Sturdy wooden case with foam insert Chodpfeu S Slxsx Ab Tof Condition: The set is in like-new condition. All components are complete and well-maintained.

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v Chjdpfxjw U A Iro Ab Tof - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: ready for operation (used), Year of construction: 2015, General Data Machine weight 1720 kg Cjdpfxsx Dfaus Ab Tohf Measurements height 2300 mm Dimensions Machine Length 3990 mm Main Drive Number of axis 6 This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 × 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 × 2020 × 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information. Application Types Welding

Condition: used, Year of construction: 2007, operating hours: 6,286 h, 2007 | Wirtgen KMA 200 | Used Asphalt Recycler | 6286 hours 📍Location: France, Boulazac Isle Manoire 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Chsdpex Dd Epjfx Ab Tof 💰 Buy Now for EUR 139000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 4 approved ✅ 8 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Only visual inspection. Machine said to have been in working condition when purchased used by the owner. Getting the machine ready for work will take a few hours, but will be arranged for a serious buyer. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31332 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2021, operating hours: 1,300 h, axle configuration: 4x4, fuel type: gasoline, color: other, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Yanmar Cjdjx Dadzopfx Ab Tjhf Weights Empty weight: 10.050 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.037 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Production country: FR Additional information Please contact Jonas Francken for more information

Condition: new, CATALOG NUMBER MR001 - brand new machine, DTR documentation + CE TECHNICAL DATA - working width: 2000 mm - front width: 2500 mm - depth: 850 mm - height: 1700/1950 mm - max. capacity: 7000 m3/h - fan power: 1.5 kW - speed: 2850 rpm Chodpfjd Dacrjx Ab Tsf - electrical parameters: 400V-50Hz - outlet duct diameter – square 540x540 mm - pre-filter: cardboard - "Paint-stop" filters - noise level approx. 78 dB - dimensions L/W/H 2500x850x2200 mm - weight approx. 250 kg Net price: 14,100 PLN Net price: 3,350 EUR at an exchange rate of 4.20 PLN/EUR (Prices may change with significant fluctuations)

Condition: used, machine/vehicle number: 008322, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Chjdpfox A Tmyox Ab Tsf Total number of drilling spindles: 28 Total number of tool changer positions: 4

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,511 h, load capacity: 20,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, fork length: 1,200 mm, empty load weight: 22,100 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift truck - LPG Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Solid rubber (bandage) Rear tires type: Solid rubber (bandage) Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Hire purchase and financing on attractive terms are always possible for us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this MAXEIN DWB 200/500G. P.S.: Our master forklift workshop specializes in the repair, maintenance, overhaul, and custom modifications for forklifts from 8 tonnes upwards. We can also display your vehicle for consignment sale at our premises. Side shifter, fork positioner, heater, full cabin, Csdpfxjx A I Rgj Ab Tjhf

Condition: ready for operation (used), Year of construction: 2001, operating hours: 120,000 h, General Data Machine weight 6000 kg Control Unit Brand FANUC Model 21i Main Drive Cjdpfx Abex A I Dge Tjhf Number of axis 2 This Takisawa TT-200 BMC multi-spindle turning machine was manufactured in 2001. It features a twin-spindle (X + Z) horizontal CNC lathe configuration with a gantry forklift. Weighing approximately 6000 kg, it has both spindles operational, though the tool turret on the right side is broken. Contact us for more information about this machine. Application Types Turning

Condition: used, VAT/margin: VAT qualifying Marking: Pneumatic valves Manufacturer : DMN Model : BL 200/1 Type : Rotary valve External diameter : 345 mm Nominal diameter : 205 mm Leroy Somer motor : 0,75 KW Atex class : EX II 20 Tightness : Air purge Chjdex Auzxjpfx Ab Tof

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Chodex Atyaopfx Ab Tef

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal Chodpfx Abelrvguo Tjf - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Chedpfox A Tcuox Ab Tsf Total number of drilling spindles: 12 Total number of tool changer positions: 14

Year of construction: 1993, condition: used, Power: 8 kW (11 HP) Tank pressure: 4 bar Volume: 406 l // currently being renovated in our workshops //   Manufacturer : Haagen & Rinau Model : Unimix SRM 200 Year : 1993 Type: vacuum mixer   Material : stainless steel   Vessel capacity: 406 L Maximum temperature: 143°C Pressure: – 1 / 3 bars   Double jacket capacity: 34 L Maximum temperature: 151°C Pressure: 4 bars   Slow mixing : Central stirring + scrapers. Fixed counter action Power: 7,5 KW Fast mixing: emulsifier at the bottom of the tank. Suction and recirculation of the product. Power : 8 / 12 KW   Integrated electrical cabinet. Siemens S5 controller   Hydraulic unit: – Up and down of the cover with its mixing tool – Rotation of the cover with its mixing tool Cjdpfx Asx Auvijb Tohf – Tilting of the tank – Up and down of the homogeniser at the bottom of the tank.

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Chsdou N Skfspfx Ab Tef Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: used, Year of construction: 2015, Multi-purpose filling line (aluminium and plastic) > Video available on request. Manufacturer : Marchesini Tonazzi Year : 2015 Model : Millenium 200 Type : Automatic Filler – Capper Filling head : 2 units Control panel Dosing and height settings: digital (50 memories) Tube orientation: electronic 40 + 2 tube holder cups Dosage: 3 to 350 ml Ø aluminium tubes: 11 – 40 mm Ø plastic / laminated tubes: 11 – 50 mm Total tube height: 50 – 250 mm System: no tubes / no filling Volumetric dosing unit with two pistons and two cylinders 3-way rotary valves Plunging heads Single-shell hopper Automatic tube ejection PETG casings Cleaning unit: device for cleaning empty tubes using compressed air and dust extraction Inkjet printing on tubes: 1 head Closed-circuit water cooling unit Tube closure, change in 5 min: – Hot air sealing system for plastic tubes – Dual aluminium tube sealing system (single or double fold) Controls : – Hopper product level: electronic – Presence of cap – Print presence check – Tube ejection with wrong code > > Stainless steel lift truck. Hydraulic pump lift Model : Roboplacer TU-751 Type : Robotic tube feeder Three-axis orthogonal robot Mini box size 400 x 400 mm Maximum dimension boxes 600 x 400 mm Manufacturer : Marchesini Year : 2015 Model : MA 250 Type : continuous cartoner Version L for long cartons Incorrect carton ejection Extended motorised carton supply system Numbering unit with embossing and polypenco roller Two-channel in-line tube carousel Format range : Width A: 25 – 100 mm, pitch 127 mm Height B: 15 – 85 mm Length C: 60 – 150 mm Full documentation available Formats available with the machine : Chjdpfox Aumujx Ab Tof – Tubes: Ø 40 x 200 mm – Cases: 55 x 40 x 220 mm, aeropla – Speed : 150 / min Application : Food industry

Condition: used, machine/vehicle number: 008176, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 25 Total number of tool changer positions: 4 Csdpfx Abex A Hh De Tshf

Year of construction: 2001, condition: used, - Current format: capsule size 0 - 48 posts Codox Ar Enspfx Ab Tohf - Max capacity: 200,000 capsules / hour - Automatic checking weight - Year: 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups. Cjdpfxou T Tt Tj Ab Tehf

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Chedpswcyacjfx Ab Tsf Total number of drilling spindles: 10 Total number of tool changer positions: 14