Used Lbx 200 for sale (16,191)

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Podpfxsx A Hfvo Ahzspl Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Ppedpfx Aou T Dv Ejhzol Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with Angle Adjustment Specialized drilling machine for stair construction, window manufacturing, and universal use thanks to pneumatic height adjustment. Angled doweling and drilling for balusters are easily accomplished with the swiveling drilling unit. - Motor with pole switching, two speeds - Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm - Motor started via practical handle switch - Precision chuck with two inserts: 16mm and M10 thread - Table size approx. 1100 x 240 mm - Linear laser for precise workpiece positioning - Drilling unit swivels 65° to both left and right - Pneumatic adjustment of working height allows doweling on two levels without setup changes - Desired drilling heights for each level can be set using handwheel and digital counter; switching between levels is pneumatic from the front - Cross adjustment approx. 320 mm, stepless or in 12 mm increments - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, mountable at front and rear of the table - 2 swiveling workpiece supports - 2 side fences, also usable as front supports - Mobility kit Ppsdpfx Aoyfta Tjhzsl - Extraction connector 80 mm - 4 used but good drill bits: 9, 12, 16, 19 mm Few touched-up paint spots, excellent condition—see original photos. A used swiveling slot mortising machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by prior arrangement. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this dealer."

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, empty load weight: 22,100 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift truck – LPG Load centre: 500 mm Mast type: standard Condition: ready for operation and fully functional Technical condition: very good Description: In addition to this RMF model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts and side loaders available at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing at attractive terms are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr Peter Sawitzki, will be pleased to provide you with comprehensive advice on this MAXEIN DWB 200/500G. P.S.: Our master workshop specialises in repair, servicing, overhauls, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle on consignment in our showroom. Crane arm, telescopic and tiltable. Telescopic boom extends from 2410 mm to 3750 mm. The jib can be tilted from approx. 30° downwards to 45° upwards. Pjdpfx Ahsx Dnzujzjpl Heater, full cab,

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation Ppodpfxeyfhppo Ahzsl – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 2026, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank Ppedpfjyfhnrsx Ahzjl - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: used, Year of construction: 2019, operating hours: 5,500 h, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: Psdpsyfhkmefx Ahzopl - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg Ppodpsb A Sxgofx Ahzel -Functionally tested

Condition: new, Year of construction: 2025, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous Podein N Tdjpfx Ahzjpl cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 8,324 h, load capacity: 20,000 kg, lifting height: 2,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 3,360 mm, fork carriage width: 1,800 mm, fork length: 1,300 mm, empty load weight: 29,210 kg, total length: 3,900 mm, drive type: Treibgas, construction width: 1,850 mm, Compact forklift truck - LPG Load center: 625 mm Fork width: 145 mm Fork thickness: 110 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Front tires type: Cushion tires Pedpfx Ahoydr Dzjzspl Front tires size: 40x20x30 Rear tires type: Cushion tires Rear tires size: 320x600/854 Description: In addition to this Hubtex model, we have around 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GKS200. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and special builds for forklifts from 8 tons and up. We are also happy to offer your vehicle for commission sale at our premises. Sideshift, fork positioner, Heater, full cabin, full free lift,

Condition: good (used), Year of construction: 2000, Turning diameter 200 mm Turning length 400 mm Control: SIEMENS SINUMERIC Number of spindles: 2 Tool changer: 2x 14 Total power requirement: 39 kW Machine weight approx. 4,800 kg Without bar feeder, machine is integrated in automatic operation Machine is still powered. Videos of the machine's functionality are available and can be provided upon request. Ppedpfx Aheydm Tdjzjl

Condition: new, Introducing the DSB T 200, a high-performance Belt/Disk Sander from KNUTH, uniquely designed to meet the needs of both professionals and DIY enthusiasts. This machine boasts a variable speed adjustment feature that allows you to finely tune the grinding disc speed from 900 to 3,600 rpm in 100 rpm increments, ensuring optimal control for precision sanding. Its robust motor, housed in a sturdy cast iron body, not only provides reliable power but also contributes to low heat generation and a long service life. The DSB T 200 is equipped with high-quality corrundum grinding discs, adjustable workpiece supports, and a digital display that shows the current speed clearly. Safety is prioritized with protective shields and a design that permits connection to a dust extraction system. Perfect for any workshop, the DSB T 200 combines powerful performance with user-friendly features. To enhance your grinding experience, make sure to order now and elevate your grinding tasks with this versatile Belt/Disk Sander. Ppsdsydmh Ujpfx Ahzjl

Condition: good (used), Year of construction: 1993, with oil filtration system Psdpfx Ahsydldhozopl Unfortunately, no further technical data is available.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm Pedpfeydi A Iex Ahzjpl -Total weight: 228 kg

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. If you have any further questions, we are happy to assist you. Ppsdpoxawctsfx Ahzjl

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg Podpfxexvb Sds Ahzepl ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: used, Year of construction: 2013, Technical details: turning diameter over bed: 284 mm turning length: 406 mm x-axis: 218 mm longitudinal traverse (z-axis): 406 mm control: Siemens 828D revolution per minute: 5000 U/min spindle bore: 62 mm max. torque on the spindle: 125 Nm rapid motion - x-axis: 30 m/min rapid traverse Z-axis: 30 m/min Ppjdpfxeydddte Ahzsl tool turret - number of stations: 12 Stationen / Stations Weight approx.: 2,8 t dimension machine xH: 3,10 x 1,40 x 2,29 m dimension L-W-H: Späneförderer: 3400 x 1150 x 2180 mm

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Ppjdpfx Ahoydc Evozol Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Ppedpfx Asx Atyashzsl

Year of construction: 2015, condition: used, weight 25 kg taper MK 0 Pedpfjwlvh Uox Ahzopl Consisting fo following modules: 4 pcs Multi Quick MQ200 complete 200-160-2428 4 pcs structural element B50 pcs. structural elementB50 pcs. tension shoe 100-2-205-25

Condition: used, Year of construction: 2011, Tube Grinding Machine – Custom-Built - Tube grinding machine with CE marking - Suitable for grinding or surface pre-treatment of various pipes - Used for galvanized steel pipes as surface pre-treatment before painting - Can be modified for other materials (requires different abrasive belts and possibly adjustments to the feed system) - Control system: Mitsubishi Pedpfxsx E T Sws Ahzepl - Automatic infeed and outfeed from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored after processing - Pipes are picked up by grippers and guided through the machine to the outfeed - Includes Felder RL125 extraction system for grinding dust removal - Requires compressed air for operation - Machine is sold without safety equipment - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load (grinding machine): 6.75 kW - Connected load (extraction): 3 kW - Footprint (without extraction unit): 2,500 x 20,500 mm

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm Psdpfx Ajuwrz Hjhzjpl - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: used, Year of construction: 1995, Gildemeister CTX-200 - CNC Lathe - Gildemeister/DMG CNC control system - 3-jaw chuck, Ø 140 mm - 12-position tool turret with driven tools - Work area lighting - Chip conveyor - 10,810 operating hours - Including various tools - Including operating manuals and documentation - Year of manufacture: 1995 Technical specifications Working area: - Swing diameter over bed cover: 440 mm - Swing diameter over cross slide cover: 210 mm - Cross travel: 160 mm - Longitudinal travel: 350 mm Spindle: - Spindle nose diameter: 120 mm h5 - Spindle nose diameter at front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power (100/50% duty cycle): 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5,000 rpm Feed system: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: incremental rotary encoder Tool turret: - Universal disc turret, automatic indexing, directional logic - Number of tool stations: 12 - Tool holder shank (DIN 69880): 20 mm - Tool indexing time per station (30°): 0.48 s Universal disc turret with driven tools: - Number of tool stations: 12 - Max. number of driven tools: 12 Pedpsxy R Uijfx Ahzepl - Max. clamping diameter for driven tools: 12 mm - Drive power (100/50% duty cycle): 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (W x H x D): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2,950 kg Noise emission: - Constant workplace sound pressure level: 77 dBA

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Ppsdpfx Ahsvygh Nezel Weight: 3,200 kg Available immediately from stock

Condition: used, Year of construction: 1999, Overview   This capsule machine (model: PRISMA 200 R) was manufactured by the Italian manufacturer NORTAN in 1999. The machine has already been dismantled and stored, but is in good condition. It can be inspected at any time and is available immediately.  Technical details   Output: 13,000 bottles per hour Bottle formats processed: 0.375 L, 0.75 L, 1.5 L (Burgundy and Bordeaux bottles) Accepted capsule sizes: 45 mm and 55 mm length, 30 mm diameter Capsule loader included Ppodpfx Aheu Aim Dszol