Used Injection Machine for sale (64,570)

Condition: excellent (used), Year of construction: 2012, operating hours: 25,000 h, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8500 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1600 mm Distance between tie bars (h x v) 1140 x 1140 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 43000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 4 x hydr. core pulls - 12 x hydr. sequentional valves - 2 x 12 folds water flow regulator Rbedpfx Aoyb Sx Hjhzjt - Robot interface according to Euromap 67

Condition: reconditioned (used), clamping force: 500 kN, screw diameter: 38 mm, injection pressure: 1,341 bar, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Rbjdpfewfp Hkjx Ahzst Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Rsdsl Tnz Eepfx Ahzebt Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: good (used), Year of construction: 2003, operating hours: 55,933 h, functionality: fully functional, machine/vehicle number: 26195, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 42 cm³, injection pressure: 175 bar, injection weight: 50 g, We are selling a Battenfeld 350 plus/75 plastic injection molding machine, year 2003. The pump has been replaced. The machine has 58,500 operating hours, works flawlessly, and is in regular operation. Rsdpoya Ev Ajfx Ahzebt Clamping force: 35 T, shot weight: 50 g.

Condition: excellent (used), Year of construction: 2008, operating hours: 49,429 h, functionality: fully functional, machine/vehicle number: 208050, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 137 cm³, injection pressure: 2,000 bar, injection weight: 140 g, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 150 mm, number of injections: 1, type of input current: three-phase, We are selling an ARBURG 420 C GOLD EDITION injection molding machine, manufactured in 2008. The machine has newly re-sealed clamping and injection units, operates perfectly and is in regular production use. Clamping force: 100 t Shot weight: 140 g Screw diameter: Ø35 mm The machine is equipped with: -connection for 3 hot runner nozzles -EUROMAP 67 interface -connection for a color dosing unit -connection for air blow / conveyor belt control The machine is sold without a robot. Rbedoya Eguopfx Ahzot MATEJ LORENCI: +386-31-589-330

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 800 h, functionality: fully functional, clamping force: 1,250 kN, ejector force: 125,000 N, All CNC FANUC Roboshot machines are FULLY ELECTRIC Demo FANUC Roboshot S100iB 2024 The machine was used at trade fairs as a demo unit and is practically new. Clamping force: 125 tons Screw diameter: according to customer requirements All additional equipment can be configured according to customer needs and can be upgraded for specific application requirements. Additional optional equipment: - FIBER sorting flap (for separation of good and defective parts) - Hot runner controller (integrated and connected to the machine) - V-gate - Additional electrical sockets Rjdpfjya D I Dox Ahzjbt - Electrical quick coupling for fast mould change - Water piping system - Mouldflo system for digital monitoring of water flow, temperature, and pressure - Machine elevation by 100 mm - Hydraulic power unit for side cores (2CH / 4CH) - Robot (Cartesian or 6-axis FANUC Robot) - ..... This machine is available for Slovenia, Croatia, Bosnia and Herzegovina, and Serbia.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Rbjdpfxexxrr Ts Ahzst Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Year 1992 Rsdpfouh U Izjx Ahzobt Scrow 32 Spray weighted 123g

Condition: good (used), Year of construction: 1992, Cincinnati Milcron Closing 100 tons Year 1992 Steering: Fanuc Auto sheet Rbjdpfx Aheh R Npqjzot

Condition: good (used), Year of construction: 1999, Demag Ergotech systems 500/200 Closing 50 TO Rbodjg Emvtopfx Ahzot Year 1999 Scrow 30 mm Spraying weight approx 90 distance between tie bars 35,5x35,5

Condition: excellent (used), Year of construction: 1999, Arburg 270S-250-60 year 1999 Closing 25 TO Scrow 22 Rodpfxjg D Rkno Ahzsbt tie bar from stand 27x27 Spraying weight approx 27g

Condition: excellent (used), Year of construction: 2004, Angel Victory 80/45 Tech Rodpjh Rawbjfx Ahzebt Closing 45 TOnnen, tie-bar-less Scrow 22 mm YEAR 2004 CC 200

Condition: good (used), Year of construction: 1989, Angel ES 7000/800 Closing 800 To FY 1989 Rodpfx Ahsc Tt Ifszsbt cc 90 distance between tie bars 100x100 Snow through knife 105 mm Weighted 64 tons / 41 To+ 15 TO ) splash weight ca3760g The machine in good condition

Condition: good (used), Year of construction: 1992, Fanuc Fanuc car sheet Rjdpfx Ahoh R Npxezsbt AC 100 Closing 100 tons Year 1992

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 Rbodpfx Ajpa Rhbshzjt EC100/A03 Minmal mold height 320mm Maximum 730mm

Condition: excellent (used), Year of construction: 1993, Battenfeld BK-T 2500/1250 Closing 250 TO Redpfx Ajr Nf Rtjhzjbt Year 1993 Scrow 60 mm distance between tie bars 63x56

Condition: excellent (used), Year of construction: 1999, Battenfeld 400-125 CDC Closing 40 tons Year 1995 Scrow 30 mm Injection weighted 77,8 g Rbjdpfxetputio Ahzet Spar spacing 27x32

Condition: excellent (used), Year of construction: 1996, Angel ES 500/90HL Closing 90 tons year 1996 Scrow 40mm PVC Srow Rbodpfjfbg Izex Ahzst

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Rjdpfx Ahsfp U Hvozsbt Closing 250 TO Year 1987 sprayed : 470 g Tie bars wide 63x56

Condition: good (used), Year of construction: 1993, Netstal 1750 /870 HP Closing 175 TO Rsdpfxeg U Arxo Ahzjbt Year 1993

Condition: excellent (used), Year of construction: 1991, Engel ES 200/50 HL Rbodpfxsld Nt Sj Ahzst Closing 50 tons Year 1991 Scrow 30 mm EC 88

Condition: like new (used), Year of construction: 2022, Manufacturer: Krauss-Maffei Year of manufacture: 2022 Power-on hours: 604 Operating hours: 463 h Machine number: 61035748 Type / Model: KM 65-380 CX Rbjdpfxsyapyfe Ahzjt Clamping force: 65 t Minimum mould installation height: 250 mm Opening stroke: 750 mm Max. distance between mounting plates: mm Clear tie bar spacing: 420 x 420 mm Mounting platen dimensions: 670 x 670 mm Screw diameter: 35 mm Max. dosing volume: 154 cm³ Shot weight (PS): 140 g Hold pressure: kN Connection: 32 kW Accessories/Equipment: 1 core pull, 1 air valve Condition: Very good Weight: 3.9 t Dimensions: 4,000 x 1,500 x 2,000 mm

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysul Schnittstelle Roboter 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Rsdpfx Ajx Tbfuehzobt Ca. 51.000 Betriebsstunden

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Rbjdpsx D I Uujfx Ahzet Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Rbedpfx Ahow Hc Spozet Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg