Used Infeed for sale (1,965)

Condition: ready for operation (used), Year of construction: 2010, This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. Fjdex D Ra Tepfx Aayjgd • ISAS edge magazine: 28 positions (selectable edges) • Gluing unit: PU 34 system with PU melting unit (capacity up to 6 kg/h), 2 kg adhesive container, QA glue application unit • Pressure section: 4 pressure rollers • Separating agent spray unit: Top and bottom application • Joint milling unit: 2 motors, each 3 kW, 150 Hz, 9,000 rpm; pneumatically controlled for infeed milling operation • Pre-milling unit: 2 motors, each 0.55 kW, 200 Hz, 12,000 rpm; double roller tracing; electro-pneumatic retraction • End trimming unit (WK 13 – chamfer/straight): 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm; electro-pneumatic adjustment to 2 positions (flush and overhang) • Profile unit FK 11 (manual): For processing edge overhangs top/bottom and trimming front/rear edges; 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Universal milling unit UF 11: 1 motor 4 kW, 150 Hz, 9,000 rpm; swiveling 90°, electro-pneumatically controlled; HSK 63 F tool holder with push-button release • Profile scraper unit PN 10: Pneumatic adjustment for lateral retraction from the working area • Finish unit FA 11 (top/bottom): Glue joint scraper; cleaning fluid application; buffing unit with 2 motors; height-adjustable with upper pressure beam • Machine control: 19-inch touchscreen operation Additional equipment • Return conveyor system: BOOMERANG ZHR05 • Inclined air cushion table: length 2,000 mm, width 1,000 mm • Conveyor belt width: 1,100 mm • Workpiece parameters: • Length: 300–2,500 mm • Width: 60–1,100 mm, or length 300–800 mm with width >1,100–2,000 mm • Thickness: 8–60 mm • For four-sided processing: Min part 300 x 300 mm; Max part 2,000 x 800 mm • Roller support rail for wide parts

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Fgodpfjwftt Ujx Aaysd Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Fgodjt Hw S Uspfx Aaysd Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Fsdpfxst Hw Txo Aayegd Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm Fodjt Hwupjpfx Aayjgd throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Fodpfx Aet Hwyloayogd Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Fsdpsu Su Apsfx Aayegd Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Fjdjxqrbxopfx Aayogd Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: excellent (used), Year of construction: 1985, pressure 25 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : MABU (D) High Speed 4 Column Automatic Punching Press model 25 VP / RC year 1985 Press force nominal 25 to Punching Speeds 120 - 600 strokes/min Stroke length adjustable 7 - 62 mm Ram adjustment range 50 mm Mounting height 225 - 310 mm Table size 560 x 640 mm Distance between columns sides 320 / 340 mm Distance between columns front/back 380 / 400 mm Opening in table / clamping plate 120 x 230 mm Ram clamping plate size 240 x 280 mm MABU Strip feed RACER 11 Max. strip width 150 mm Fgodpfxezbu Sps Aayed Max. feed stroke 120 mm Main drive approx. 3 kW Total drive approx. 3,5 kW - 380 V - 50 Hz Weight approx. 2.400 kg Accessories / Special Features: • MABU Strip feed device model RACER 11 RCTF, mounted on the left side, stroke adjustable, infeed height adjustable, • Automatic continuous stroke and single stroke available as well as inching mode, piece counter, blow out device • Sep. control cabinet and switch cabinet, Vibration dampening machine shoes • Large, soundproof cabin (disassembled) • Various accessories, manuals and former safety test reports Condition : very good, press was regularly maintained ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of all kinds of presses available. Please let us know your requirements.

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Fgsdpfx Aaet Hxcneysd Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 Fjdpfx Aast Hw R Deyjgd control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Fgsdpfx Aast Hwzpjysd Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Fodpfot Hw N Hex Aaysgd Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2000, grinding diameter 360 mm grinding length 1600 mm centre height 180 mm internal diameter 0 mm grinding depth 0 mm swing diameter 0 mm total power requirement 40 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m K A R S T E N S (Germany) Universal “CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3 Positions = B-Axis Head swivels in 3 positions = 240 ° / 17,5 degree X-axis adjustment in total 360 mm Increments for infeed 0,001 – 125 mm Workpiece wheelhead = C-Axis Spindle speeds steplessly adjustable 10 – 1.000 rpm Spindle taper / Spindle bore MK 4 / 24 mm Table speeds 0,01 – 10.000 mm/min Total electrical load 40 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: * Very versatile CNC Grinding Machine for almost all grinding purposes like External/Internal and Face grinding as well as for Excentric- / Cam- / Polygone Grinding and even for Thread Grinding * Free programmable CNC System make BWO Model 900 C with many grinding cycles and for easy input of the work-parameters. Graphic support, any many more features. * 3 position wheelhead with 3 Grinding spindles as B-Axis, one with measuring feeler (Z - Position) * MOVOMATIC Measuring Device Model ES 400 for diameter control, Probe head CR 60, to be mounted on table. * MPM Automatic Grinding wheel balancing Device, Dressing devices with diamantflees mounted on table surface and also motorized Diamantroll Profile dresser on table (for thread profiles, etc.) * Workhead and tailstock can be easily moved on table by air cushion. Hydraulic quill on tailstock. * No Coolant Device available ! Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract. Fgedjt Hw Rdopfx Aaysd

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Fgodpfxet Hwzij Aaysd Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Fgsdpfx Aex Haryoayjd GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out Fedpfx Aaszbczxeyegd • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: used, Year of construction: 2013, grinding length 800 mm grinding width 400 mm workpiece height 375 mm Control Siemens 840 D total power requirement 18 kW weight of the machine ca. 2,6 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 840 KT CNC year 2013 Serial no 38040513 _____ Grinding length max. (table movement 850mm) 800 mm Fodpfx Aswd Tx Ioayogd Grinding width max. (cross movement 400mm) 450 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 800 x 400 mm Max. table load 700 kg Table speed 5 – 35.000 mm/min Cross-/Vertical quick feed 5 – 4.000 mm/min Grinding wheel measurements 300 x 50 x 76,2 mm (350 x 100 x 76,2) Cutting spped max. 45 m/s Grinding spindle-drive approx. 9 kW Total electrical load approx. 18 kW - 400 V - 50 cycles Weight approx. 2.600 kg Accessories / Special Features: • Machine is equipped with a simple to use but freely programmable SIEMENS CNC control model 840 D SolutionLine with additional GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming, also of complex grinding wheel profiling and easy connecting of all the usual grinding cycles. • electronic handwheel for 3 axis. • Table movement is actuated by ball screw drive (KT), which allows both very high and very low table speeds and is also ideal for profile grinding. • Cross feed (Z) and infeed (Y) effected by ball screw drive with incremental glass scale. • Diamond dressing device mounted on the left side of the table (also for profile dressing); additional driven diamond roller dressing device (table-mountable) with automatic dressing cycle, including compensation. • HOFMANN balancing device EasyBalancer EB3100 (with installed rpm & vibration sensor) • Unfortunately currently only a small magnet 110 x 200 mm available. • Separate band filter coolant filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Fjdpfx Aet Hw U Asayegd Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg Fsdjzkvaljpfx Aayjgd ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades Fgedpfxszkub Ie Aayjd - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker Fgedpfeyid Nwex Aayjd VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Fgedpfx Aozkt Itoayjd Weight: 510 kg EQUIPMENT Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm Fgsdpfx Aszktz Hoayjd total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed mobile as new

Condition: used, Year of construction: 2000, Planing width: 410 mm Infeed table: 1620 mm Fgsdpfx Aajzb N Tzsyed Outfeed table: 1170 mm Overall length: 2850 mm Electrically adjustable planing table with digital display Fence adjustable with auxiliary fence Motor: 4 kW Speed: 5000 rpm Space required: 2950 x 1260 mm Weight: approx. 850 kg Location: Supplier