Used Infeed for sale (1,974)

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. Todpjzwg Tisfx Amroc The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply Tjdpfx Asywuczsmrsc  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Tsdpfszhlmiox Amrec Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW

Condition: good (used), Year of construction: 2012, Used Bomar bandsaw with dual column system Model: Individual 620.460 DGH Capacity: 620 x 460 mm Double mitre Todpfx Aoy Rktiomroc Year of manufacture: 2012 Includes 6 meter infeed conveyor + 6 meter outfeed roller conveyor with measuring system

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 18WJ3-25, Weijin WJ-C400 LDPE Zipper Bag Sealing & Cutting Machine – NEW / UNUSED Industrial automatic zipper-bag sealing and cutting machine manufactured by Weijin Machinery Industry Co., Ltd., Taiwan, equipped with a two-servo control system for high-speed LDPE/LLDPE zipper-bag production. Technical Specifications Model: WJ-C400 Material: LDPE zipper bag Maximum cutting width: 300 mm Maximum cutting length: 320 mm Film thickness: 0.04–0.20 mm Bag-making speed: 30–130 pcs/min Maximum unwind reel weight: 50 kg Power supply: 380 V, 3-phase Main motor: 1.5 kW AC Yaskawa J1000 1.5 kW main motor inverter Micro-computerized control interface and electrical cabinet Unwind Unit Steel-shaft unwind 0.37 kW AC infeed motor 0.37 kW motor drive Dancer tension-control mechanism Sealing & Cutting Unit High-toughness heat sealing and cutting knife Yaskawa 1.3 kW servo motor Yaskawa 1.5 kW servo drive S2000 printing-pattern photo sensor Zipper Bag Collecting Unit 0.1 kW AC outfeed motor Tjdpez Aay Tsfx Amrjc Outfeed motor reducer Standard Spare Parts Drive belts and heating pads included as specified in the original equipment documentation. Condition: NEW / UNUSED

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer for sale a high-quality UNTHA LR 1000 industrial wood shredder, in almost new condition, having been used only for approximately 1 hour of testing operation. This machine is a reliable and efficient solution for processing wood waste such as offcuts and solid wood materials, delivering consistent output size and excellent performance. Tedpfxszgr Hts Amrjc Key Features & Benefits Condition: Practically new – only test run (~1 hour) Brand: UNTHA (Austria – premium shredding technology) Model: LR 1000 Robust industrial design for long-term operation High throughput capacity: approx. 600–700 kg/h (beech offcuts) Uniform output size: approx. 40 mm (30 mm screen installed) Ideal for woodworking companies, carpentry shops, and recycling operations Technical Specifications Material Input Max. input size: approx. 600 × 120 × 55 mm Feed system: tipping box approx. 1.0 m³ Moisture content: < 11% Metal content: not allowed Machine Performance Main drive: 2 × 18.5 kW Hydraulic power: 1.1 kW Rotor speed: 98 rpm Throughput: approx. 600–700 kg/h Cutting System Rotor diameter: 300 mm Number of knives: 27 pcs Cutting system: UNTHA cutter system Screen size: 30 mm Electrical & Control Voltage: 400 V / 50 Hz Control system: Siemens SIMATIC S7-1200 (CPU 1214) Dimensions & Weight Machine dimensions: approx. 1,704 × 1,863 × 1,630 mm Infeed opening: 1,000 × 1,050 mm Total weight: approx. 2,400 kg Included Equipment 45° machine configuration (improved feeding of bulky material) Horizontal discharge screw conveyor (closed design) Full bin indicator with automatic stop Machine support legs (~100 mm) External interface contact

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Feed rate: 5 - 30 m/min Feed motor: 5 kW Tedpfx Ajzzv Abemrjc Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right: Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: used, Year of construction: 1992, Spindle arrangement: bottom – right – left – top Planing width min./max. 8-180 mm Planing height min./max. 5 - 120 mm Length of infeed table: 2000 mm Feed rate: 8 m/min Feed rollers: pneumatic Infeed roller before the jointer Electric height adjustment of the feed beam Manual width adjustment via crank 4 planing cutterblocks, each with 2 knives 1 pre-jointer Tjdpfxsz Abthj Amroc Fold-up safety guard 4 dust extraction connections Total connected power approx. 18 kW Dimensions approx. L x W x H 3000 x 1000 x 1450 mm Weight approx. 1200 kg

Condition: used, Year of construction: 2002, for coils and strip material from 0.4 - 15 mm max./min. board thickness 60/6 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication blocking roller for shortest workpiece sequence safety/noise protection hoods central dust extraction connection, D = 160 mm, join milling cutters, D = 120 mm chip collection box, D = 100 mm Tjdsz Abppjpfx Amrjc equipped with: > Join milling cutters 1961 incl. DIA tools > memory-programmable screen control unit SPK 18000 (color screen) > Automatic edge magazine 1901 for coils and strip material > Glue station 1906 for cartridges + granules, including sensing nozzle > Pressing unit 1926, motor-driven > Saw hoods 1918 > Edge trimming unit 1920 > Radius cutter 1929 incl. chip collection box, pneumatic adjustment (separate for top and bottom) > Profile milling unit 1934 for longitudinal processing and corner copying (bottom + front edge) > Profile milling unit 1933 for longitudinal processing and corner copying (top + rear edge) > Flat cutter 1964, controlled by the application > Deburring unit 1944, incl. immersion control > Spraying device 1856 at the infeed and outfeed > Feed rate 12/16 m/min > Motor-driven bridge adjustment > Infeed guide, motor-driven Length 7600 mm Width 1300 mm Height 2000 mm Weight 2800 kg

Condition: good (used), Baumann Perfecta 115 Paper Cutting Machine The machine is in perfect condition and ready for production. Todpozz Hhnjfx Amrsc Year of manufacture: 2021. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Baumann Perfecta premium cutting machines are manufactured in Balingen, Germany. Distinguishing Features of the Baumann Perfecta Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: used, Year of construction: 2014, Roll forming line Trima K2 with compact proofing cabinet G2-3 Tjdpfx Amoz A Ry Isrec Suitable for round, long-rolled, enveloped, and flattened products, e.g.: hamburger buns, hot dog buns, mini baguettes Dough divider and rounder K2 (year of manufacture 2014) Digital adjustment of weight, shaping chamber height, shaping speed, and shaping time Dough hopper capacity 25 kg with infeed belts Mehler for dough hopper, shaping chamber, and spreading belts Manual adjustment of pressing force for different types of dough Weight range: 25-95g / 50-150g With foot switch Touchscreen control with recipe memory Output: max. 3,200 pieces/h Proofing cabinet G2-3 (year of manufacture 2013) Proofing time approx. 3 min (depending on the upstream machine) Number of holders: 100 With motorized top belt including adjustable speed Manual removal of dough pieces

Condition: used, Year of construction: 2004, Roll production line König Mini Rex G2000 Year of manufacture: 2004 Compact system G2000 with Mini Rex 4000 heading machine Compact proofing cabinet with an hourly output of approximately 2,500 pieces For higher output without proofing cabinet operation, Mini Rex, swiveling, up to a maximum of 4,000 pieces/hour Tsdpfx Amjz A R Apjroc Weight range: 35-85 g Dough divider size: SKG58 and RK58 Dough dividers for round and square rolls Lateral discharge conveyor Proofing time approx. 6 min at an output of 2,000 pieces/hour Dough rounding unit incl. one dough rounding tool of your choice, subject to availability Integrated infeed and long roller

Condition: used, Year of construction: 2018, Lippelt 800 long roller station Year of manufacture: 2018 Working width: 800 mm Pressure roller at the infeed, adjustable in height and laterally Working plate, adjustable Tedpfx Asz A Sdzemrec With timing roller on the transfer belt (pneumatic) Flour spreader with electrically adjustable flour quantity, including 2 containers Pressure roller at the outfeed, adjustable in height and laterally Belt speed adjustable Machine can operate in stand-alone mode.

Year of construction: 2008, condition: used, UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Working width: 1300 mm - Feed rate: 5 m/min - Control range: 2-10 m/min - Working height: 920 + 20 mm - Special pass-through height in UV operation: 150 mm - Pass-through height without UV operation: 200 mm - Workpiece dimensions: 300 x 50 x 10 to 2600 x 1300 x 150 mm - Coating media: Water-based and solvent-based coatings, UV clear coats and pigmented coatings - Infeed conveyor belt - 4 UV drying lamps (1 bottom, 3 top) - Mounted on 2 belt conveyors from Venjakob Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Tsdpfx Amez A S Itjroc

Condition: used, Bütfering ECO 111 Electronic Wide-Belt Calibration and Fine Sanders Contact roller unit 85 SH CPS electronically controlled segmented pad Working width 1100 mm Terminal for various operating programs with selector switch and LED display Motor power approx. 11 kW Brush cleaning unit RTE additional compact roller table at infeed RTA additional compact roller table at outfeed Machine is FULLY REFURBISHED and in TOP CONDITION Available ex-stock Lieboch Tjdey Rzf Aspfx Amrec

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw Tjdpfszib Niex Amroc milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Todpfjzp Hc Uex Amroc Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm Tjdjx Eilqspfx Amrjc PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: Tedpfx Amoyy Nnqjrjc - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Marel I-Cut 36 Portion Cutter The Marel I-Cut 36 portioning machine has been specifically developed for the precise cutting of uniform portions. This machine is ideal for portioning and slicing meat, fish, and poultry. The I-Cut 36 is a highly efficient slicer capable of making up to 1,000 cuts per minute. The machine is height-adjustable, allowing it to be easily integrated into an existing production line. Its hygienic design ensures that the product only comes into contact with the cutting chamber, knife, and conveyor belt. This portioning slicer is completely manufactured from stainless steel. Production capacity: Up to 1,000 cuts/min Maximum product dimensions: 900 × 300 × 150 mm Belt speed: 20–500 mm/s Accuracy: 97–98% Program memory: Up to 84 programs Cutting angle: 45° and 90° Conveyor belt working width: 300 mm Infeed and outfeed height: 1,010 mm Voltage: 400 V (3 + N, 50 Hz) Power: 8 kW Weight: 875 kg Todpjz Dg Sisfx Amroc Year of manufacture: 2010 Machine dimensions (W × D × H): 2,380 × 1,310 × 1,480 mm

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Tsdjzx D Umopfx Amrec Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Rackwork. Dust scrapers on wheels. Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Condition: good (used), 1 x Coating Drum 4m long. Infeed diameter 750mm. Outfeed 1m Tsdpfx Aszz It Somrsc

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60227, Offer 26293 Hydraulic Horizontal – Two-Column Miter Bandsaw Machine Technical data: - Automatic operation for the cutting process, hydraulic lifting and lowering of the saw frame - Manual miter adjustment to the left and right with clamping Tsdpfszz Rblox Amroc - Saw band dimensions 4400 x 34 x 1.1 mm - Cutting speed, continuously adjustable 15 - 150 m/min - Cutting pressure regulation, continuously adjustable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range: - at 90°: round 335 mm - at 90°: square/rectangular 500 x 335 mm - at 45°: round 330 mm - at 45°: square 320 x 335 mm - at 30°: square 170 x 335 mm - Miter adjustment with digital angle display - Outfeed roller conveyor with dimension stop 6000 mm - Infeed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust, combined jointer and thicknesser from Panhans, type 445. The machine has a planing width of 510 mm, a powerful 5.5 kW motor, and a motor brake. The complete cutterhead guard, including the support arm, has been replaced. Thanks to the segmented infeed roller, the machine is also well suited for simultaneously processing workpieces of different thicknesses or workpieces that are offset. Two rollers in the thickness table facilitate the feed, especially for heavy and long workpieces. Technical data and features: +Manufacturer: Panhans +Type: 445 +Combined jointer and thicknesser +Planing width: approx. 510 mm +Maximum thickness planing height: approx. 220 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Cutterhead speed: approx. 5,000 rpm +Jointer table length: approx. 2,050 mm Tjdszz Niuopfx Amrjc +Two feed speeds: approx. 7 and 14 m/min +Jointer fence can be swiveled up to 45° +Motor brake +Segmented steel infeed roller +Two rollers in the thickness table +New cutterhead guard, including a new support arm +Dust extraction connection: approx. 160 mm +Solid and durable industrial machine +Weight: approx. 1,000 kg A solid and heavy Panhans machine with a large 510 mm planing width – ideal for carpentry shops, joineries, and professional use. Inspection and a test run are possible by prior appointment.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment Tsdpex Sxfvefx Amrsc 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.