Used Indexable Insert Drill for sale (7,564)

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2676, warranty duration: 6 months, year of last overhaul: 2024, Our refurbished SIMA 220 from PALAMIDES collects, counts, sorts, checks and packs your bulk mailings cost-effectively and reliably. At a speed of up to 28,000 items per hour, letters are transferred directly from an upstream inserting or addressing machine and deposited fully automatically into letter containers in accordance with postal regulations. The letter containers are automatically taken from a magazine, which can be preloaded with around 10 containers. Save money with every operating hour Mail processing machines could often run faster if manual picking and sorting into letter containers were smoother and faster. With the SIMA 220, you have the opportunity to significantly speed up the entire processing and thus achieve a higher level of operational efficiency. Flexibly combined with any pre-machine The SIMA 220 can be quickly and easily adjusted to the height of your pre-machine and, in the event of a malfunction, the entire line can be stopped via a corresponding signal exchange. The integrated belt turner also ensures that letters from different pre-machines can be transferred and deposited in the letter container in accordance with postal regulations. Only the good ones get through Incidentally, the SIMA 220 also checks every single letter for the correct format and specifically rejects any that do not comply. This ensures that no incorrectly addressed envelopes or the like go through the post. Top quality at an affordable price The CUPASO price-performance promise also applies to this SIMA 220. Just because you choose a used machine does not mean you have to compromise on quality and reliability. Used machines refurbished by CUPASO are the only ones that come with a warranty. That's our promise to you Our full 6-month warranty promise also applies to this SIMA 220, of course. That means you're on the safe side. If anything breaks during this period, we will replace the defective part and install it at our expense (except for wear and tear, machine control and travel costs). Product size: DIN C6 - long Speed: 28,000 pcs/h Year of manufacture: 2013 Machine number: 2676 Condition: Workshop refurbished with warranty Warranty period: 6 months Machine location: CUPASO Showroom, DE-38110 Braunschweig Equipment: • Belt turner Iedpfx Ahst A A Tpovstd • Alignment section • 2 x defective product ejection • Total product counter and counter per container • Programme control via touchscreen • Magazine for approx. 10 DPAG letter containers • Display for four filled letter containers • Height adjustment of the machine • Mobile machine

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 6671C/6975C/6822C/6989D/6815C, warranty duration: 6 months, year of last overhaul: 2024, Müller online channel for connection to an inserting machine - collect, fold A4 single sheets Itedpfx Ahovdrx Isvjd - Condition: completely overhauled with guarantee (6 months) Consisting of: - 1 x 6798 Autoloader (S/N: 64580) - 1 x 6686D-30K Feeder single sheet vacuum (P/N: 67159) - 1 x 6995 transfer unit incl. 6815 reading unit with large reading area (P/N: 69016) - 1 x 6671C Collecting tray straight ahead 11"-12" (P/N: 69695) - 1 x 6975C Distance module for RU100 (P/N: 69215) - 1 x 6822C Double folding machine upwards (P/N: 69755) - 1 x 6989D Transfer unit (P/N: 69086) - 1 x 6815C STOP function for transfer unit with blower (P/N: 69208) +++Refurbished appliance with 6 months warranty according to our enclosed warranty conditions +++ +++Installment purchase and rental possible on request+++

Condition: good (used), Year of construction: 1993, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm Itjdpfx Ahoyvhclsvod -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg

Condition: good (used), Year of construction: 1990, Gebruikte radiale boormachine van MAS Itjdoyu Su Uopfx Ahvjd Type VO 80 Boorcapaciteit 80 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min Isdpjukf Ncofx Ahvjtd >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000, Machine no. 14000258 >> Travel range X/Y/Z: 500 / 250 / 160 mm >> Travel range W: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system SF 32 >> Infinitely variable spindle speed: up to 9200 rpm >> Drive power: 5 kW >> Footprint (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books About the machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented contouring controls that enable conventional milling and drilling operations to be programmed directly at the machine using the easily understood plain text dialog. Even at maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site. Itedpfx Ahjyu Snzovjd

Year of construction: 2017, condition: good (used), In good technical condition and fully operational. Year of manufacture: 2017. Fanuc control. Ijdpfx Aeyu R Slehvstd

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Itsder D T Uyjpfx Ahvsd Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: used, Year of construction: 2022, drilling capacity steel/cast iron 50/60 mm throat max. 1600 mm workpiece height max. 1300 mm throat min. 300 mm spindle taper: MK5 Iodpoyuy Szefx Ahvotd drilling depth in one stroke 300 mm vertical adjustment of arm 800 mm base plate surface area 1600 x 800 mm spindle turning speed range 125- 1250 U/min total power requirement 3,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,4 x 1,2 x 2,7 m feed per revolution 0,025- 1,38 mm/r Without table.

Condition: used, Column Drilling Machine IXION - MAXION Type Unimax 3 Serial No. 203063 Year of manufacture: 2009 Drilling capacity: 30 mm Spindle taper: MK 3 – short quill Throat: 260 mm Quill stroke: 125 mm Table size: 360 x 500 mm Column diameter: 110 mm Spindle speed: 80 - 3200 rpm, infinitely variable Motor power: 0.8 / 1.5 kW Power supply: 400 Volt, 50 Hz - Spindle speed adjustable via 2 V-belt stages, 2 motor speeds and stepless variator drive - Digital speed display - Motor speed setting 1 for clockwise and counter-clockwise operation, setting 2 for clockwise operation only - Drill table height adjustment via hand crank - Drill chuck RÖHM Ø 1 to 16 mm - Emergency stop button Required space (L x W x H): 800 x 530 x 1800 mm Weight: 230 kg Ijdpfxoykca Te Ahvetd Very good condition

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Iedpfx Ahedzp S Nsvetd Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: excellent (used), Oscillating window milling machine OMG Pneumatic clamping of material Automatic strip feeding Aggregate angle adjustment 0-90° Pneumatic movement of spindles Guide bar supports Adjustment of oscillating movement of drills Itodou Iwcwjpfx Ahvjd

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 7,000 rpm, bar diameter (max.): 42 mm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, controller manufacturer: FANUC, controller model: 31i-B, number of axes: 10, This 10-axis Index C100 horizontal turning machine was manufactured in 2018. It features impressive axis travels of 70 mm in both X and Y directions, and 400 mm in Z. The machine includes three turrets with driven tools capable of 8000 rpm, and a counter spindle diameter of 42 mm. If you are looking to get high-quality turning capabilities, consider the Index C100 machine we have for sale. Contact us for further details. • Production hours: approx. 15,000 h • Spindles: Main and counter spindles with D42; counter spindle Ø42 mm, 7000 rpm • Turrets: 3x VDI25 with Index W-serration; driven tools on all three turrets, up to 30 driven tool positions, 8000 rpm • Coolant system: Emulsion; flushing beside main and counter spindle; through counter spindle; 8 bar pump; 18 bar pressure-increasing pump (no Eco Fluid 80 bar); mechanical coolant filter (no paper filter); coolant tower for cooling main/counter spindles and electrical cabinet • Software/Functions: Milling cycles Transmit / Tracyl • Monitoring: Index Motorforce tool monitoring for Fanuc Ijdpeyuwyvefx Ahvjtd • Interfaces/Preparation: Ünimag4 interface for bar feeder; preparation for oil mist unit (mechanical flange D200 mm; electrical Harting plug 3x240 V) • Clamping: SK45 in main spindle (without collets); E173 in sub spindle (without collets) • Storage/condition: Machine stored under power in a heated warehouse Additional equipment • Bürener chip conveyor, 840 mm height, hinge-chain type • Handling unit with 2‑finger gripper for finished part and remnant • Conveyor belt for finished parts with flap for remnants • Bar feeder: LNS, 1500 mm Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 81 mm, travel distance Z-axis: 80 mm, number of axes: 2, Horizontal turning machine manufactured in 2000. This Index ABC features a maximum spindle speed of 5000 1/min and a bar capacity of 60 mm. It includes an 8-station revolver with driven tools capable of 6000 1/min. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. Itedpfxsyuu N Ie Ahvsd • Main Spindle Torque (100/40% ED): 95/140 Nm • Bar Capacity: Max. 60 mm • Revolver 1: 8 stations (7 for VDI 25 tools, 1 for synchronous spindle) • Revolver 1 Driven Tools: Max. speed 6000 1/min, power 3.3 kW • Revolver 2: 6 stations, X-travel 81 mm, Z-travel 80 mm • Synchronous Spindle: Max. speed 4500 1/min, torque 10 Nm • Coolant Tank Capacity: 220 liters • Power Supply: 400 V, 50 Hz • Cabinet Dimensions: 1300 mm width x 2000 mm height • Display: 24 cm color flat screen interface • Control Version: C200-4 Additional equipment • Loading Magazine: INDEX MBL 65/3700 • MBL Bar Length Capacity: 3000 mm (D 5–10) / 3600 mm (D 10–65) • Chip Conveyor: Knoll chip conveyor with 840 mm discharge height Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Isdpfxofmdcqo Ahvetd Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany. Iedpfjyur E Hox Ahvstd

Condition: used, spindle mount: MK 4, drilling depth: 50 mm, overall weight: 2,300 kg, Radial Drill Brand: Foradia Model: GH 50-1000 Serial No.: 5080 Itedpfx Aheymw I Djved Drilling capacity: 50mm Maximum radius: 1,135mm Minimum radius: 425mm Longitudinal head travel: 700mm Column diameter: 250mm Usable arm from column edge: 300mm Vertical arm stroke: 620mm Minimum spindle-to-base distance: 300mm Maximum spindle-to-base distance: 1,145mm Spindle stroke: 225mm Morse taper: 4 Speeds: 12 (35-1460rpm) Automatic feeds: 6 (0.05-0.35) Motor power: 3.5 + 1.5 Hp Weight: 2,300kg

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: Itodpfohzbipox Ahvsd 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 2003, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Dimensions and Travel Ranges Tool holder SK 40 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill travel (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle lower edge – table top min mm 70 / max mm 680 Distance spindle lower edge – floor min mm 970 / max mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacities Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive Itsdpfx Aoyuqmiohvod AC motor, frequency controlled kW 5.5 @ 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feed rate stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental Units: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining operation, material-dependent cutting data suggestions Tool management: up to 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X,Y,Z axes, program re-start with selectable functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - arbitrarily mounted rectangular parts - arbitrarily mounted round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphic: Graphical display of drilling patterns.

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Iedoyv A A Hopfx Ahvetd Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for precise hole positioning and a switch for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine features a water tank and water pump. Isdpjyghh Ujfx Ahvotd

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm Ijdpfx Asyvz Tdohvotd z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Itedpfx Ahsyvz Nrjvod Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: ready for operation (used), Year of construction: 1981, Available immediately from Swiss toolmaking facility: Rapid radial drilling machine HKS Model HKS 40 Year of manufacture: 1981 Morse taper MK 4 Drilling capacity: 40 mm Arm reach: 1120 mm Installation height: 780 mm Table size: 1520 x 560 mm 3-axis digital readout for table adjustment Isdjyvzb Iopfx Ahvotd Spindle drive power: 3.8 kW Spindle speeds: 26 – 1940 rpm Quill stroke: 200 mm Feeds: 0.05 – 0.45 mm/min Thread cutting device Coolant system Total power consumption: 6.5 kW Hydraulic vice Weight: 2600 kg Offered at a price of EUR 2,500.— plus VAT ex location

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Itedoyvy A Rjpfx Ahved Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Total power requirement: 4 kW Machine weight approx.: 4.6 t