Used Hydraulical Machine Vices for sale (73,012)

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Iedpfsv Upvrjx Ah Noht

Condition: good (used), hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp Ihsdpfjd S Ia Tjx Ah Njt -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm Iedpfxjdpvwij Ah Neht -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg

Condition: used, pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg Ihedjdpvwhopfx Ah Njt

Year of construction: 2000, condition: good (used), Hydraulic machine vice Ihedpfxohcipko Ah Nst Make BUSCH Type:V2 HY 94.

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg Ijdpfoxw Rdfjx Ah Neht in good condition

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg Ihjdpfsuxbwgex Ah Net

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Iodpfx Ahoxp R E To Neht Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: used, Hydraulic machine vise ARNO Ijdped Amwisfx Ah Njht Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg good condition

Condition: used, jaw width 200 mm jaw height 67 mm span 325 mm span adjustable in three steps construction height 165 mm Ihjdpfx Ahsc Tcgcs Net space requirement length - 800 x width - 300 x height - 165 mm weight approx. 116 kg

Condition: used, jaw width 200 mm with specal jaws jaw height 67 mm Iedpfoc Tcgbox Ah Neht span 325 mm span adjustable in three steps construction height 165 mm space requirements length - 800 x width - 300 x height - 165 mm weight approx. 118 kg

Condition: good (used), Jaw width, approx.: 200 mmClamping width, approx.: 365 mmDimensions LxWxH, approx.: 630 x 300 x 165 mmWeight, approx.: 75 kgArt. 0320276 Ihedefbaq Hepfx Ah Njt

Condition: excellent (used), Machine vice, mechanical.jaw width, approx.: 200 mmspan width, approx.: 425 mmDimensions LxWxH, approx.: 630 x 300 x 165 mmWeight, approx.: 75 kgArt. 0320275 Iedod Ttd Rspfx Ah Neht

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz Iedpfjndz Npjx Ah Njht combination machine ja extensive accessories ca. 50 Sätze pressure 50 t

Condition: used, Hydraulic machine clamps with Enerpac hydro-pneumatic unit. The clamps have a jaw width of 150 mm. The jaws are interchangeable, allowing you to make your own jaws. For better photos, please visit our website. Special price: 1500,- Ijdsgbdzcspfx Ah Njht

Condition: good (used), Machine vice, sturdy vice, drill press vice Isdpox Tfhyefx Ah Nsht -Machine vice: rotatable -Clamping jaws 90 x 30 mm -Clamping depth: 65 mm -Dimensions: 320/230/H95 mm -Weight: 12.6 kg

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 working stroke: 40 mm table height: 900 mm Connected load: 6 kVA Ihsdpohygztefx Ah Net weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), 3 machine vices Goody. Ihedpsrai Aksfx Ah Net

Condition: used, machine/vehicle number: SA9FT3A50MH17xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20727 Specifications: EU-approved until 07.05.2026 Model year: 2021 Tires: See photos Hydraulic loading ramps Manual widening Length: 1,095 cm Width: 254 cm Axle distance: 514 / 136 cm Curb weight: 7,000 kg Tool compartment included Description:EU-approved and ready for immediate operation.Equipped with hydraulic loading ramps and manual widening.Available for quick delivery. Ihedewvy Rzjpfx Ah Net Technical approved: Yes EU-approved until: 07.05.2026 Own weight: 7000 Total Weight: 28000 Payload: 21000 Width: 254 Length: 1095 Model: m/ hydrauliske kjørebruer

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Ihsdpfxjx D I Uus Ah Njt Application Types Injection Moulding

Year of construction: 2002, condition: ready for operation (used), Injection Unit Iodpfjx D Hxlsx Ah Neht Screw diameter 40 mm This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Ihsdpfx Ahjx D Ea Is Not Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, New hose assembly machine DAEWOO model DA5100-HC Hydraulic hose crimper, workshop hose crimper For crimping hose fittings Serial number: 25DW05950ALE01 Year of manufacture: 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump delivery rate: 6 L/min Operating capacity: 200 units/hour Hydraulic pressure: 315 bar Ijdpfsx Srwfex Ah Neht Motor power: 3 kW Power supply: 400 Volt, 50 Hz - 2 operating modes: manual and automatic - Operation via push button or foot switch - Crimp travel setting via knurled screw - Short changeover times for different hose diameters; jaws are simply slid into guides and held in place magnetically - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement (L x W x H): 700 x 500 x 1250 mm Weight: 270 kg New - unused

Condition: used, - Pressing force 25 t - Throat depth 750 mm - Max. punching diameter 110 mm - Hydraulic tool clamping - Stroke adjustment with digital display Isdpfsx Tvhwsx Ah Nsht - X / Y with digital display - Table size 1600 mm x 1050 mm - Weight approx. 2000 kg

Year of construction: 1994, condition: ready for operation (used), Immediately available ex location Hydraulic folding machine ONISMA (Spain) Model: P 3 x 10 Year of manufacture: 1994 Working length: 3050 mm Material thickness up to 10 mm Drive power: 15 kW Weight: 9 t Bending tools renewed in 2024. Iodpfxex Tqwtj Ah Neht Price: EUR 7,500 plus VAT ex location