Used Hydraulic Machine Vice for sale (72,905)

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Kdedpfjv Upvrox Abfon

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm Kdodpfx Ajxp R E Tjbfen - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Year of construction: 2000, condition: good (used), Hydraulic machine vice Kdsdshcipkepfx Abfjn Make BUSCH Type:V2 HY 94.

Condition: good (used), hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp Kdsded S Ia Tspfx Abfsn -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Condition: repair required (used), pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg Kdsdpfx Aedpvwijbfsn

Condition: used, pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice Kedpfxjdpvwhe Abfodn -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Kdedexw Rdfjpfx Abfen Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: used, jaw width 200 mm jaw height 67 mm Kodpfx Abec Tcgcefedn span 325 mm span adjustable in three steps construction height 165 mm space requirement length - 800 x width - 300 x height - 165 mm weight approx. 116 kg

Condition: used, jaw width 200 mm with specal jaws jaw height 67 mm span 325 mm span adjustable in three steps construction height 165 mm Kjdpfxec Tcgbe Abfedn space requirements length - 800 x width - 300 x height - 165 mm weight approx. 118 kg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Kdsdpfxsy Uiyvj Abfon Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Kdedpfx Abezfvvvefsn Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 Jaw width 200 mm Base body type LC 160/200 Kjdpfxozfimuo Abfsdn Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition.

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 252 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Stable base body, ground on all sides - Can be mounted horizontally, vertically, or laterally - Guide rail with 19 mm guide groove - Additionally, 1 set of prism jaws Kedpfx Abezczvqsfedn Dimensions L x W x H 480 x 150 x 107 mm Weight 32 kg Good condition

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Kdsdpfxszd N Sbs Abfen Spindle rotation: 3 HP Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, cutting force: 12.5 t, sheet thickness steel (max.): 6 mm, overall weight: 2,000 kg, Equipment: CE marking, emergency stop, finger protection, foot remote control, Hydraulic notching machine Manufacturer: Boschert, Type: K30 – 120, Punching press: Trumpf Year of manufacture: 2001 Technical data Width x Depth x Height: 1.5 x 1.6 x 1.4 m Weight: 2,000 kg Table dimensions: 1600 x 1000 mm Kdsdpfszcm Ncex Abfon Station 1: Notching Angle range: 30 - 120 degrees (infinitely adjustable) Cutting length: 200 mm Cutting capacity: 6 mm in ST 40 steel 4 mm in stainless steel Station 2: Punching (Trumpf tool system) Punching force: 12.5 t Punching diameter: 105 mm max. Overhang: 300 mm All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Ksdpfxozdkbks Abfsdn Also ideal as a spare parts machine.

Condition: used, Manufacturer: ENDI Engineering Kft Type: LBS-20 Manufacturing year: 2004 Operating pressure: 200 bar Kdedoy E Twaopfx Abfen Voltage: 380 V Electric power: 1,5 kW Weight: 378 kg

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional options and accessories = - Remote central locking - Lift axle - Air suspension - Pintle hook - Sun visor - Spotlights = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm = Further information = Technical information Kdsdpfx Abszc Rhcsfjn Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Kdsdpsza D Eiefx Abfsn Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Year of manufacture: 2002 Weight: 350 kg Working length: 3300mm Kodpfx Asmv Hz Iobfodn Pipe thickness: 12 and 15 mm 2 heads, force: 2t

Condition: excellent (used), Year of construction: 2002, *📋 MACHINE DESCRIPTION* - *Make / Model*: GEKA PUMA 80/E-500 - *Year*: `To be completed` - CE marking, first-hand machine - *Condition*: Very good working condition. Original paint with normal signs of wear. Stored in a dry place. - *Power*: 80 Tons - *Gooseneck*: 500 mm deep - *Motor*: 7.5 kW - Three-phase 400V - 50 Hz *⚙️ TECHNICAL SPECIFICATIONS* 1. *Punching station*: Ø 28 mm in 20 mm thickness / Ø 40 mm in 14 mm 2. *Flat bar shear*: 300 x 20 mm 3. *Angle shear*: 120 x 120 x 12 mm at 90° 4. *Nibbler*: Included and mounted on the machine 5. *Round/square bar cutting*: Ø 45 mm / Square 40 mm *✅ INCLUDED EQUIPMENT* - Foot pedal control + manual levers - Emergency stop + lockable isolator switch - 1 set of punch/die mounted on the machine `Specify Ø` - Electrical cabinet with diagram Kdjdpjy U U R Tefx Abfen - CE protective guard

Condition: good (used), functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Kodpfovxif Ijx Abfsdn

Condition: good (used), Year of construction: 2000, Technical specifications: Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons Kdjdpfx Aezbmw Dobfon The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Kdodpfsu Ibuksx Abfen Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Ksdpezbcwmofx Abfedn Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.