Used Hydraulic Vise for sale (17,554)

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t Kjdpfx Afsu Nfp Isisnc dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Knodpfjxp R E Tox Afioc Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Kjdpfswvva Ssx Afionc

Condition: good (used), Year of construction: 2009, FEATURES Knodpfx Afoxp R Afoiec Useful cutting length: 3.2 m Max. thickness steel S235JR: 6 mm Weight: 7,200 KG Overall dimensions (cm): 390x180x170 Power supply: 400 V 3-phase Power: 7.5 KW Max. cutting rate: 14 cuts/min Electric rear stop, adjustable from 15 to 650 mm Digital display and fine adjustment with handwheel 1 m alignment gauge with ruler, T-slot and retractable latch Hardened steel blades, 4 cutting edges Fixed cutting angle of 1.5° Manual blade clearance adjustment on the side Table equipped with 18 balls to prevent marking the sheet 2 front supports, each 1 m Cutting line lighting Slotted grid for narrow strips Oil tank Foot pedal control Rear light curtain guard

Condition: used, mileage: 801,000 km, Year of construction: 2006, Serial number: YV2AS50D26A61xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20470 Specifications: EU approved until: 02.06.2025 Model year: 2006 Mileage: Approx. 801,000 km​ Gearbox: I- Shift Tires: See pictures Retarder Length: 675 cm Width: 250 cm Wheelbase: 321/ 137 cm Curb weight : 9,930 kg Drivetrain: 6x4 Engine power: 520 hp Ksdpfswphxyex Afienc 2 beds in driver's cabin Cowcatcher Tool cabinet Extra lights Coffee maker Radio/ CD Air conditioning ( AC) Description:

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm Kjdpfx Afou Nfudjijnc ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t Kodpfx Aovzxrpefionc dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2009, Serial number: YY9SE51MX9T01xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20343 Specifications: - 2009 model - 3 axles - Lift on 1 axle - Friction steering on 3 axles - Lashings - Ready for delivery Description: We have a 2009 Damm SE-51M 3 axles Machine trailer w/ hydraulic driving bridges for sale. The trailer is Eu-approved until 02.09.26 and can be put straight into production. It works as it should according to the owner. Ready for delivery. Technical approved: Yes EU-approved until: 02.09.2026 Own weight: 9750 Total Weight: 51000 Payload: 41250 Knjdpfxjwi Rlis Afiec Width: 255 Length: 1360 Model: SE-51M 3 akslet Maskinhenger m/ hydrauliske kjørebroer

Condition: used, Technical details: tank capacity: 800 l overpressure : zul./max.=ca.100 bar motor: 5 weight: ca. 2,4 t Hydraulic Pressure Storage Plant - aggregate= LxWxH=2,48x1,73x2,13m - oil tank :LxWxH=2,0x1,1x0,5m - 5 motors ( from 3,8 up to 66 kW) - coolant: nitrogen - 5 pumps iD. Kodpfx Aeu N Ervefisnc *

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Knjdevzxq Sspfx Afijc Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, Year of construction: 2013, Serial number: WLASKS343DMF6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21566 Specifications: 2013 model 3 Axles Swing on 3 axles Knjdpfx Ajxp Autofioc Lift on 1 axle Ready for remote control and control box Air-controlled canopy Tires (see pictures) Rearview camera Ready for delivery   Description: We have a 2013 Langendorf 2 axle asphalt semi w/ Hydraulic canopy for sale. It is set up for remote control and control box. The trailer is EU approved and functions as it should. Ready for delivery Technical approved: Yes EU-approved until: 13.06.2026 Own weight: 10700 Model: 3 akslet asfaltsemi m/ Hydraulsik kapell

Condition: used, Year of construction: 2001, Technical details: pressure capacity: 145 bar charging voltage: 24 V / 12 V V weight: 185 kg dimensions L x W x H: 1,0 x 0,5 x 0,8 m Hydraulic pressure 145 bar Input 230 v / AC Output 12 V / 200A or 24 v / 100A Knedpsu N E Hgsfx Afisc *

Condition: used, Year of construction: 1998, pressure 315 t Ksdpfjvzxphex Afisnc stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Technical details: tank capacity: 17 l motor: 1380 Flow rate: 2,54 l / min pressure capacity: : 340 und Pw: 310 bar total power requirement: ca. 1,5 kW weight: ca. 21 kg dimensions L x W x H: 0,5 x 0,2 x 0,6 m 4x directional valve 1x pressure relief valve 2x pressure switch Kodpfeu N E H Hjx Afisnc 1x pressure gauge 2x bubble accumulator *

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW Kodpevuufljfx Afijnc weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 55 kg span width: 310 mm Hydraulic vice Jaw depth 49mm i.D. * Ksdpsu Nlp Ijfx Afionc

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm Kjdsvut Rmspfx Afienc permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Technical details: feed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. Ksdpfx Asu N Erisfisnc - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Prices vary according to aggregate size. *

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm Kedpfx Afsvut N Neijnc dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1993, Technical details: Kjdpfx Afsu Rni Hjionc sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 Knodpfx Ajvut H Iefijc permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 38 kg Knodpfsu Nkhvsx Afiec Various machine vices are available, e.g. WMW or Röhm. (fixed, rotatable, tiltable, adjustable) Welchen Schraubstock? Bitte geben Sie bei Anfragen die Nr. an! We will send you corresponding offers! Price on request. i.D. *

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm Knedpfxevuk Ezs Afisc table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm Kedpfxsvc Ax Ne Afienc height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Ksdpfx Ajvc Awxofisnc Operation via two-hand control panel. (and one-hand operation) *